Re: magicmouse: claimed by neither input, hiddev nor hidraw
From: Justin P. Mattock
Date: Tue May 11 2010 - 04:01:46 EST
here is dmesg with the:
[ 27.435674] magicmouse 0005:05AC:030D.0004: claimed by neither input,
hiddev nor hidraw
[ 27.435686] magicmouse 0005:05AC:030D.0004: magicmouse hw start failed
[ 0.000000] Linux version 2.6.33-00095-g28918c2 (name@name) (gcc
version 4.4.2 (GCC) ) #19 SMP Tue May 11 00:49:25 PDT 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda3 ro
debug audit=1 selinux=1 vga=790 enforcing=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f0ea000
[ 0.000000] 0000000000 - 003f000000 page 2M
[ 0.000000] 003f000000 - 003f0ea000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f0ea000 @ 8000-b000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000003fefd1c0 00074 (v01 APPLE Apple00
000000A5 01000013)
[ 0.000000] ACPI: FACP 000000003fefb000 000F4 (v03 APPLE Apple00
000000A5 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000003fef0000 048D1 (v01 APPLE MacBookP
00020002 INTL 20050309)
[ 0.000000] ACPI: FACS 000000003fec0000 00040
[ 0.000000] ACPI: HPET 000000003fefa000 00038 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000003fef9000 00068 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 000000003fef8000 0003C (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 000000003fef7000 000A0 (v32 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000003fef6000 00030 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000003fef5000 00053 (v01 APPLE Apple00
00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000003feef000 004DC (v01 APPLE CpuPm
00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 000000003febd000 0064F (v01 SataRe SataPri
00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT 000000003febc000 0069C (v01 SataRe SataSec
00001000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003f0ea000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00017a36c8] TEXT DATA BSS ==>
[0001000000 - 00017a36c8]
[ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #3 [00017a4000 - 00017a4271] BRK ==>
[00017a4000 - 00017a4271]
[ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE ==>
[0000001000 - 0000003000]
[ 0.000000] #5 [0000003000 - 0000007000] ACPI WAKEUP ==>
[0000003000 - 0000007000]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==>
[0000008000 - 0000009000]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD ->
[ffff880001c00000-ffff8800029fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f0ea
[ 0.000000] On node 0 totalpages: 258185
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3839 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3476 pages used for memmap
[ 0.000000] DMA32 zone: 250710 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:b0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s91096
r8192 d23592 u1048576
[ 0.000000] pcpu-alloc: s91096 r8192 d23592 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 254549
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz
root=/dev/sda3 ro debug audit=1 selinux=1 vga=790 enforcing=0
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1007964k/1033128k available (3997k kernel code,
388k absent, 24084k reserved, 2503k data, 504k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2161.241 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4322.48 BogoMIPS (lpj=2161241)
[ 0.004080] Security Framework initialized
[ 0.004091] SELinux: Initializing.
[ 0.004123] SELinux: Starting in permissive mode
[ 0.004142] Mount-cache hash table entries: 256
[ 0.005619] CPU: Physical Processor ID: 0
[ 0.005624] CPU: Processor Core ID: 0
[ 0.005630] mce: CPU supports 6 MCE banks
[ 0.005655] CPU0: Thermal monitoring enabled (TM2)
[ 0.005662] using mwait in idle threads.
[ 0.005667] Performance Events: Core2 events, Intel PMU driver.
[ 0.005677] ... version: 2
[ 0.005682] ... bit width: 40
[ 0.005686] ... generic registers: 2
[ 0.005691] ... value mask: 000000ffffffffff
[ 0.005696] ... max period: 000000007fffffff
[ 0.005701] ... fixed-purpose events: 3
[ 0.005706] ... event mask: 0000000700000003
[ 0.006919] ACPI: Core revision 20091214
[ 0.030203] Setting APIC routing to flat
[ 0.030591] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040636] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz
stepping 06
[ 0.040999] Booting Node 0, Processors #1 Ok.
[ 0.112042] Brought up 2 CPUs
[ 0.112051] Total of 2 processors activated (8644.79 BogoMIPS).
[ 0.114299] NET: Registered protocol family 16
[ 0.116077] ACPI: bus type pci registered
[ 0.116172] PCI: Using configuration type 1 for base access
[ 0.132295] bio: create slab <bio-0> at 0
[ 0.135069] ACPI: EC: EC description table is found, configuring boot EC
[ 0.143361] ACPI: BIOS _OSI(Linux) query ignored
[ 0.144603] ACPI: Interpreter enabled
[ 0.144611] ACPI: (supports S0 S3 S4 S5)
[ 0.144715] ACPI: Using IOAPIC for interrupt routing
[ 0.178270] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.180074] ACPI: No dock devices found.
[ 0.183463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.183584] pci_root PNP0A08:00: ignoring host bridge windows from
ACPI; boot with "pci=use_crs" to use them
[ 0.188651] pci_root PNP0A08:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.188660] pci_root PNP0A08:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.188669] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.188679] pci_root PNP0A08:00: host bridge window [mem
0x40000000-0xfebfffff] (ignored)
[ 0.188786] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.188793] pci 0000:00:01.0: PME# disabled
[ 0.188831] pci 0000:00:07.0: reg 10: [mem 0x50404000-0x50404fff]
[ 0.188933] pci 0000:00:1b.0: reg 10: [mem 0x50400000-0x50403fff 64bit]
[ 0.189004] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189012] pci 0000:00:1b.0: PME# disabled
[ 0.189118] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.189127] pci 0000:00:1c.0: PME# disabled
[ 0.189236] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.189244] pci 0000:00:1c.1: PME# disabled
[ 0.189353] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.189362] pci 0000:00:1c.2: PME# disabled
[ 0.189437] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
[ 0.189510] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
[ 0.189583] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
[ 0.189664] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
[ 0.189735] pci 0000:00:1d.7: reg 10: [mem 0x50405400-0x504057ff]
[ 0.189803] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.189812] pci 0000:00:1d.7: PME# disabled
[ 0.189992] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by
ICH6 ACPI/GPIO/TCO
[ 0.190004] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by
ICH6 GPIO
[ 0.190012] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0680 (mask 000f)
[ 0.190022] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
1640 (mask 000f)
[ 0.190035] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at
0300 (mask 001f)
[ 0.190132] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
[ 0.190144] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
[ 0.190155] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
[ 0.190166] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
[ 0.190177] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
[ 0.190238] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
[ 0.190250] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
[ 0.190261] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
[ 0.190272] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
[ 0.190283] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
[ 0.190295] pci 0000:00:1f.2: reg 24: [mem 0x50405000-0x504053ff]
[ 0.190329] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.190337] pci 0000:00:1f.2: PME# disabled
[ 0.190407] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.190485] pci 0000:01:00.0: reg 10: [mem 0x40000000-0x47ffffff pref]
[ 0.190497] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
[ 0.190509] pci 0000:01:00.0: reg 18: [mem 0x50300000-0x5030ffff]
[ 0.190531] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.190561] pci 0000:01:00.0: supports D1 D2
[ 0.190626] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.190633] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.190640] pci 0000:00:01.0: bridge window [mem 0x50300000-0x503fffff]
[ 0.190649] pci 0000:00:01.0: bridge window [mem
0x40000000-0x47ffffff 64bit pref]
[ 0.190723] pci 0000:02:00.0: reg 10: [mem 0x50200000-0x50203fff 64bit]
[ 0.190738] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.190777] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.190836] pci 0000:02:00.0: supports D1 D2
[ 0.190841] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190851] pci 0000:02:00.0: PME# disabled
[ 0.190918] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.190926] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.190935] pci 0000:00:1c.0: bridge window [mem 0x50200000-0x502fffff]
[ 0.191017] pci 0000:03:00.0: reg 10: [mem 0x50100000-0x5010ffff 64bit]
[ 0.191114] pci 0000:03:00.0: supports D1
[ 0.191119] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.191129] pci 0000:03:00.0: PME# disabled
[ 0.191205] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.191216] pci 0000:00:1c.1: bridge window [mem 0x50100000-0x501fffff]
[ 0.191291] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.191299] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.191308] pci 0000:00:1c.2: bridge window [mem 0x4c100000-0x500fffff]
[ 0.191320] pci 0000:00:1c.2: bridge window [mem
0x48000000-0x4bffffff 64bit pref]
[ 0.191385] pci 0000:0c:03.0: reg 10: [mem 0x4c004000-0x4c0047ff]
[ 0.191398] pci 0000:0c:03.0: reg 14: [mem 0x4c000000-0x4c003fff]
[ 0.191466] pci 0000:0c:03.0: supports D1 D2
[ 0.191471] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.191481] pci 0000:0c:03.0: PME# disabled
[ 0.191548] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive
decode)
[ 0.191560] pci 0000:00:1e.0: bridge window [mem 0x4c000000-0x4c0fffff]
[ 0.191599] pci_bus 0000:00: on NUMA node 0
[ 0.191610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.192869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.193290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.193699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.194113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.194586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.228230] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.228564] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.228902] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.229239] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.229568] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.229907] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 0.230249] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12
14 15)
[ 0.230581] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.231100] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.231100] vgaarb: loaded
[ 0.232081] SCSI subsystem initialized
[ 0.232081] libata version 3.00 loaded.
[ 0.232110] usbcore: registered new interface driver usbfs
[ 0.232110] usbcore: registered new interface driver hub
[ 0.233021] usbcore: registered new device driver usb
[ 0.233096] PCI: Using ACPI for IRQ routing
[ 0.233096] PCI: pci_cache_line_size set to 64 bytes
[ 0.234251] cfg80211: Calling CRDA to update world regulatory domain
[ 0.235029] NetLabel: Initializing
[ 0.235029] NetLabel: domain hash size = 128
[ 0.235029] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.235071] NetLabel: unlabeled traffic allowed by default
[ 0.235082] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.235093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.235101] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.238007] Switching to clocksource tsc
[ 0.249831] pnp: PnP ACPI init
[ 0.249886] ACPI: bus type pnp registered
[ 0.256306] pnp 00:07: disabling [io 0x1640-0x164f] because it
overlaps 0000:00:1c.2 BAR 7 [io 0x1000-0x1fff]
[ 0.261321] pnp: PnP ACPI: found 9 devices
[ 0.261327] ACPI: ACPI bus type pnp unregistered
[ 0.261347] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.261356] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.261363] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.261371] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.261379] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.261387] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.261401] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.261415] system 00:07: [io 0x0680-0x06ef] has been reserved
[ 0.261423] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.261430] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.261437] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.261445] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.267603] pci 0000:01:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 0.267615] pci 0000:02:00.0: no compatible bridge window for [mem
0xfffe0000-0xffffffff pref]
[ 0.267679] pci 0000:00:1c.0: BAR 9: assigned [mem
0x50500000-0x506fffff pref]
[ 0.267689] pci 0000:00:1c.1: BAR 9: assigned [mem
0x50700000-0x508fffff 64bit pref]
[ 0.267699] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
[ 0.267707] pci 0000:01:00.0: BAR 6: assigned [mem
0x50320000-0x5033ffff pref]
[ 0.267716] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.267722] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.267730] pci 0000:00:01.0: bridge window [mem 0x50300000-0x503fffff]
[ 0.267738] pci 0000:00:01.0: bridge window [mem
0x40000000-0x47ffffff 64bit pref]
[ 0.267750] pci 0000:02:00.0: BAR 6: assigned [mem
0x50500000-0x5051ffff pref]
[ 0.267759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.267766] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.267776] pci 0000:00:1c.0: bridge window [mem 0x50200000-0x502fffff]
[ 0.267785] pci 0000:00:1c.0: bridge window [mem
0x50500000-0x506fffff pref]
[ 0.267798] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.267805] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.267815] pci 0000:00:1c.1: bridge window [mem 0x50100000-0x501fffff]
[ 0.267824] pci 0000:00:1c.1: bridge window [mem
0x50700000-0x508fffff 64bit pref]
[ 0.267838] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.267845] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.267855] pci 0000:00:1c.2: bridge window [mem 0x4c100000-0x500fffff]
[ 0.267864] pci 0000:00:1c.2: bridge window [mem
0x48000000-0x4bffffff 64bit pref]
[ 0.267878] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.267883] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.267893] pci 0000:00:1e.0: bridge window [mem 0x4c000000-0x4c0fffff]
[ 0.267901] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.267928] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.267936] pci 0000:00:01.0: setting latency timer to 64
[ 0.267951] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.267960] pci 0000:00:1c.0: setting latency timer to 64
[ 0.267974] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.267983] pci 0000:00:1c.1: setting latency timer to 64
[ 0.267998] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.268007] pci 0000:00:1c.2: setting latency timer to 64
[ 0.268183] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.268194] pci 0000:00:1e.0: setting latency timer to 64
[ 0.268202] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.268208] pci_bus 0000:00: resource 1 [mem
0x00000000-0xffffffffffffffff]
[ 0.268215] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.268220] pci_bus 0000:01: resource 1 [mem 0x50300000-0x503fffff]
[ 0.268227] pci_bus 0000:01: resource 2 [mem 0x40000000-0x47ffffff
64bit pref]
[ 0.268235] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.268241] pci_bus 0000:02: resource 1 [mem 0x50200000-0x502fffff]
[ 0.268247] pci_bus 0000:02: resource 2 [mem 0x50500000-0x506fffff pref]
[ 0.268253] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.268258] pci_bus 0000:03: resource 1 [mem 0x50100000-0x501fffff]
[ 0.268264] pci_bus 0000:03: resource 2 [mem 0x50700000-0x508fffff
64bit pref]
[ 0.268273] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.268278] pci_bus 0000:04: resource 1 [mem 0x4c100000-0x500fffff]
[ 0.268285] pci_bus 0000:04: resource 2 [mem 0x48000000-0x4bffffff
64bit pref]
[ 0.268293] pci_bus 0000:0c: resource 1 [mem 0x4c000000-0x4c0fffff]
[ 0.268299] pci_bus 0000:0c: resource 3 [io 0x0000-0xffff]
[ 0.268305] pci_bus 0000:0c: resource 4 [mem
0x00000000-0xffffffffffffffff]
[ 0.268344] NET: Registered protocol family 2
[ 0.268447] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.269006] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[ 0.270072] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.271493] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.271502] TCP reno registered
[ 0.271515] UDP hash table entries: 512 (order: 3, 49152 bytes)
[ 0.271555] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[ 0.271820] NET: Registered protocol family 1
[ 0.272046] pci 0000:01:00.0: Boot video device
[ 0.272069] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.276213] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.276228] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[ 0.276371] microcode: Microcode Update Driver: v2.00
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.278331] Initializing RT-Tester: OK
[ 0.278488] audit: initializing netlink socket (enabled)
[ 0.278520] type=2000 audit(1273564311.277:1): initialized
[ 0.289010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.312491] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.312849] fuse init (API version 7.13)
[ 0.313639] msgmni has been set to 1970
[ 0.314039] SELinux: Registering netfilter hooks
[ 0.315444] alg: No test for stdrng (krng)
[ 0.315473] io scheduler noop registered
[ 0.316055] io scheduler cfq registered (default)
[ 0.317292] vesafb: framebuffer at 0x40000000, mapped to
0xffffc90000100000, using 3072k, total 3072k
[ 0.317302] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.317308] vesafb: scrolling: redraw
[ 0.317313] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.365593] Console: switching to colour frame buffer device 128x48
[ 0.409799] fb0: VESA VGA frame buffer device
[ 0.427032] Linux agpgart interface v0.103
[ 0.430944] loop: module loaded
[ 0.431433] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.433482] ata_piix 0000:00:1f.1: version 2.13
[ 0.434018] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.434600] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 0.435295] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.435933] scsi0 : ata_piix
[ 0.437058] scsi1 : ata_piix
[ 0.439950] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0
irq 14
[ 0.440578] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8
irq 15
[ 0.441243] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.441974] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.592917] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.593624] scsi2 : ata_piix
[ 0.594249] scsi3 : ata_piix
[ 0.599362] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma
0x40a0 irq 19
[ 0.606272] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66
[ 0.612186] ata1.00: configured for UDMA/66
[ 0.614239] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D
KCV9 PQ: 0 ANSI: 5
[ 0.618804] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.618808] Uniform CD-ROM driver Revision: 3.20
[ 0.619234] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.619570] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.672582] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma
0x40a8 irq 19
[ 0.683734] usbcore: registered new interface driver usblcd
[ 0.695028] usbcore: registered new interface driver usbled
[ 0.706743] PNP: No PS/2 controller found. Probing ports directly.
[ 0.719281] i8042.c: No controller found.
[ 0.731646] mice: PS/2 mouse device common for all mice
[ 0.744183] Linux video capture interface: v2.00
[ 0.758609] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05)
initialised: dm-devel@xxxxxxxxxx
[ 0.772251] EDAC MC: Ver: 2.1.0 May 11 2010
[ 0.786504] cpuidle: using governor ladder
[ 0.800663] cpuidle: using governor menu
[ 0.819254] usbcore: registered new interface driver hiddev
[ 0.845104] usbcore: registered new interface driver usbhid
[ 0.860799] usbhid: USB HID core driver
[ 0.876015] oprofile: using NMI interrupt.
[ 0.891376] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[ 0.891695] IPVS: Registered protocols (TCP, AH, ESP)
[ 0.891924] IPVS: Connection hash table configured (size=4096,
memory=64Kbytes)
[ 0.891971] IPVS: ipvs loaded.
[ 0.892225] Initializing XFRM netlink socket
[ 0.892244] NET: Registered protocol family 17
[ 0.892301] NET: Registered protocol family 15
[ 0.892303] lib80211: common routines for IEEE802.11 drivers
[ 0.892306] lib80211_crypt: registered algorithm 'NULL'
[ 0.892821] No TPM chip found, activating TPM-bypass!
[ 1.047840] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.067656] ata3.01: configured for UDMA/100
[ 1.083567] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B
0081 PQ: 0 ANSI: 5
[ 1.100377] sd 2:0:1:0: [sda] 234441648 512-byte logical blocks: (120
GB/111 GiB)
[ 1.100545] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 1.133413] sd 2:0:1:0: [sda] Write Protect is off
[ 1.149624] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.165896] sd 2:0:1:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.182967] sda: sda1 sda2 sda3 sda4
[ 1.270559] sd 2:0:1:0: [sda] Attached SCSI disk
[ 1.344159] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 1.361097] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 1.378046] Freeing unused kernel memory: 504k freed
[ 1.926899] SELinux: 8192 avtab hash slots, 175799 rules.
[ 2.095133] SELinux: 8192 avtab hash slots, 175799 rules.
[ 2.473851] SELinux: 7 users, 14 roles, 3026 types, 119 bools, 1
sens, 256 cats
[ 2.490458] SELinux: 77 classes, 175799 rules
[ 2.517920] SELinux: Completing initialization.
[ 2.534250] SELinux: Setting up existing superblocks.
[ 2.550371] SELinux: initialized (dev sda3, type ext4), uses xattr
[ 2.567134] SELinux: initialized (dev securityfs, type securityfs),
uses genfs_contexts
[ 2.583746] SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
[ 2.600372] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
[ 2.616955] SELinux: initialized (dev hugetlbfs, type hugetlbfs),
uses transition SIDs
[ 2.633622] SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
[ 2.649964] SELinux: initialized (dev inotifyfs, type inotifyfs),
uses genfs_contexts
[ 2.666100] SELinux: initialized (dev anon_inodefs, type
anon_inodefs), uses genfs_contexts
[ 2.682442] SELinux: initialized (dev pipefs, type pipefs), uses task
SIDs
[ 2.698997] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
[ 2.716410] SELinux: initialized (dev sockfs, type sockfs), uses task
SIDs
[ 2.733275] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 2.750141] SELinux: initialized (dev proc, type proc), uses
genfs_contexts
[ 2.767070] SELinux: initialized (dev bdev, type bdev), uses
genfs_contexts
[ 2.783638] SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
[ 2.800155] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
[ 2.837370] type=1403 audit(1273564313.837:2): policy loaded
auid=4294967295 ses=4294967295
[ 3.689816] usbcore: registered new interface driver uvcvideo
[ 3.707461] USB Video Class driver (v0.1.0)
[ 3.732724] applesmc: Apple MacBook Pro detected:
[ 3.751037] applesmc: - Model with accelerometer
[ 3.769847] applesmc: - Model with light sensors and backlight
[ 3.788595] applesmc: - Model with 12 temperature sensors
[ 3.807926] applesmc: device has already been initialized (0xe0, 0x00).
[ 3.807928] applesmc: device successfully initialized.
[ 3.826909] applesmc: 2 fans found.
[ 3.846517] input: applesmc as
/devices/platform/applesmc.768/input/input1
[ 3.865125] Registered led device: smc::kbd_backlight
[ 3.883846] applesmc: driver successfully loaded.
[ 3.914201] usbcore: registered new interface driver appletouch
[ 3.953843] ACPI: SSDT 000000003feb8c10 002AE (v01 APPLE Cpu0Ist
00003000 INTL 20050309)
[ 3.974371] ACPI: SSDT 000000003feb8910 002A0 (v01 APPLE Cpu0Cst
00003001 INTL 20050309)
[ 3.994867] Monitor-Mwait will be used to enter C-1 state
[ 3.994913] Monitor-Mwait will be used to enter C-2 state
[ 3.994957] Monitor-Mwait will be used to enter C-3 state
[ 3.994968] Marking TSC unstable due to TSC halts in idle
[ 4.014243] Switching to clocksource hpet
[ 4.016958] ACPI: SSDT 000000003feb8f10 00087 (v01 APPLE Cpu1Ist
00003000 INTL 20050309)
[ 4.018244] ACPI: SSDT 000000003feb7f10 00085 (v01 APPLE Cpu1Cst
00003000 INTL 20050309)
[ 4.130576] Bluetooth: Core ver 2.15
[ 4.156847] NET: Registered protocol family 31
[ 4.176676] Bluetooth: HCI device and connection manager initialized
[ 4.196874] Bluetooth: HCI socket layer initialized
[ 4.221076] Bluetooth: L2CAP ver 2.14
[ 4.240644] Bluetooth: L2CAP socket layer initialized
[ 4.270139] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.296119] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.316286] usbcore: registered new interface driver btusb
[ 4.357507] Bluetooth: RFCOMM TTY layer initialized
[ 4.383453] Bluetooth: RFCOMM socket layer initialized
[ 4.403365] Bluetooth: RFCOMM ver 1.11
[ 4.429141] Bluetooth: HCI UART driver ver 2.2
[ 4.448753] Bluetooth: HCI H4 protocol initialized
[ 4.474685] Bluetooth: HCI BCSP protocol initialized
[ 4.511455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.531880] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.552618] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.552622] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.573402] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 4.594424] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 4.615250] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.639400] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.639454] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[ 4.668385] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.694746] hub 1-0:1.0: USB hub found
[ 4.714313] hub 1-0:1.0: 8 ports detected
[ 4.739510] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.758513] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.777234] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.777239] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.795119] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 4.813348] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 4.832039] hub 2-0:1.0: USB hub found
[ 4.850074] hub 2-0:1.0: 2 ports detected
[ 4.868308] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.886493] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.886497] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.904293] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 4.922338] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 4.940626] hub 3-0:1.0: USB hub found
[ 4.957767] hub 3-0:1.0: 2 ports detected
[ 4.974696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.991448] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.991452] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.008039] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 5.024827] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 5.042044] hub 4-0:1.0: USB hub found
[ 5.058252] hub 4-0:1.0: 2 ports detected
[ 5.074516] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16
[ 5.090776] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.090780] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.106837] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 5.123264] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 5.140224] hub 5-0:1.0: USB hub found
[ 5.156436] hub 5-0:1.0: 2 ports detected
[ 5.190290] usb 1-4: new high speed USB device using ehci_hcd and
address 3
[ 5.194416] ieee1394: raw1394: /dev/raw1394 device initialized
[ 5.314194] alg: No test for cipher_null (cipher_null-generic)
[ 5.358777] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 5.376514] alg: No test for digest_null (digest_null-generic)
[ 5.394044] alg: No test for compress_null (compress_null-generic)
[ 5.413146] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 5.433446] uvcvideo: UVC non compliance - GET_DEF(PROBE) not
supported. Enabling workaround.
[ 5.577940] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 5.862068] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 5.934341] udev: starting version 147
[ 6.091059] input: Apple Computer Apple Internal Keyboard / Trackpad
as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[ 6.195742] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard
[Apple Computer Apple Internal Keyboard / Trackpad] on
usb-0000:00:1d.0-2/input0
[ 6.197493] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 6.197500] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts
with ACPI region SMBI [0xefa0-0xefaf]
[ 6.197502] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.017921] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.022182] sky2 driver version 1.26
[ 7.022239] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.022255] sky2 0000:02:00.0: setting latency timer to 64
[ 7.022297] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[ 7.022423] sky2 0000:02:00.0: irq 24 for MSI/MSI-X
[ 7.025070] sky2 eth0: addr 00:17:f2:cb:e3:71
[ 7.027629] ohci1394 0000:0c:03.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 7.158316] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 7.250215] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 7.338005] ACPI: Lid Switch [LID0]
[ 7.341490] HDA Intel 0000:00:1b.0: irq 25 for MSI/MSI-X
[ 7.341548] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.357595] appletouch: Geyser mode initialized.
[ 7.357759] input: appletouch as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[ 7.363772] input: Apple Computer Apple Internal Keyboard / Trackpad
as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input5
[ 7.363878] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device
[Apple Computer Apple Internal Keyboard / Trackpad] on
usb-0000:00:1d.0-2/input2
[ 7.518433] power_supply ADP1: uevent
[ 7.518436] power_supply ADP1: No power supply yet
[ 7.518467] power_supply ADP1: power_supply_changed
[ 7.518472] ACPI: AC Adapter [ADP1] (on-line)
[ 7.544264] power_supply ADP1: power_supply_changed_work
[ 7.544267] power_supply ADP1: power_supply_update_gen_leds 1
[ 7.544286] power_supply ADP1: uevent
[ 7.544288] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[ 7.544292] power_supply ADP1: Static prop TYPE=Mains
[ 7.544296] power_supply ADP1: 1 dynamic props
[ 7.544299] power_supply ADP1: prop ONLINE=1
[ 7.613988] power_supply BAT0: uevent
[ 7.613994] power_supply BAT0: No power supply yet
[ 7.614137] power_supply BAT0: power_supply_changed
[ 7.614149] power_supply BAT0: power_supply_changed_work
[ 7.640451] power_supply BAT0: power_supply_update_bat_leds 0
[ 7.640925] power_supply BAT0: uevent
[ 7.640930] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 7.640939] power_supply BAT0: Static prop TYPE=Battery
[ 7.641023] power_supply BAT0: 13 dynamic props
[ 7.641037] power_supply BAT0: prop STATUS=Unknown
[ 7.641048] power_supply BAT0: prop PRESENT=1
[ 7.641059] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 7.641068] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 7.641079] power_supply BAT0: prop VOLTAGE_NOW=12481000
[ 7.641087] power_supply BAT0: prop CURRENT_NOW=0
[ 7.641095] power_supply BAT0: prop POWER_NOW=0
[ 7.641103] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 7.641114] power_supply BAT0: prop ENERGY_FULL=47360000
[ 7.641122] power_supply BAT0: prop ENERGY_NOW=46810000
[ 7.641131] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 7.641139] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 7.641147] power_supply BAT0: prop SERIAL_NUMBER=
[ 7.641507] power_supply BAT0: uevent
[ 7.641513] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 7.641522] power_supply BAT0: Static prop TYPE=Battery
[ 7.641530] power_supply BAT0: 13 dynamic props
[ 7.641537] power_supply BAT0: prop STATUS=Unknown
[ 7.641546] power_supply BAT0: prop PRESENT=1
[ 7.641556] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 7.641566] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[ 7.641578] power_supply BAT0: prop VOLTAGE_NOW=12481000
[ 7.641587] power_supply BAT0: prop CURRENT_NOW=0
[ 7.641596] power_supply BAT0: prop POWER_NOW=0
[ 7.641606] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[ 7.641616] power_supply BAT0: prop ENERGY_FULL=47360000
[ 7.641626] power_supply BAT0: prop ENERGY_NOW=46810000
[ 7.641636] power_supply BAT0: prop MODEL_NAME=ASMB012
[ 7.641645] power_supply BAT0: prop MANUFACTURER=SMPN012
[ 7.641655] power_supply BAT0: prop SERIAL_NUMBER=
[ 7.663896] ACPI: Battery Slot [BAT0] (battery present)
[ 7.698556] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 7.735281] ACPI: Power Button [PWRB]
[ 7.748032] usb 4-2: new full speed USB device using uhci_hcd and
address 2
[ 7.772215] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 7.772228] ath9k 0000:03:00.0: setting latency timer to 64
[ 7.847212] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 7.896301] ACPI: Sleep Button [SLPB]
[ 7.906715] ath: EEPROM regdomain: 0x64
[ 7.906717] ath: EEPROM indicates we should expect a direct regpair map
[ 7.906721] ath: Country alpha2 being used: 00
[ 7.906722] ath: Regpair used: 0x64
[ 7.931261] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 7.935534] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 7.990526] ACPI: Power Button [PWRF]
[ 7.997530] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.998053] Registered led device: ath9k-phy0::radio
[ 7.998108] Registered led device: ath9k-phy0::assoc
[ 7.998170] Registered led device: ath9k-phy0::tx
[ 7.998225] Registered led device: ath9k-phy0::rx
[ 7.998273] phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81
mem=0xffffc90000bc0000, irq=17
[ 8.041727] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11
Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[ 8.323115] usb 5-1: new full speed USB device using uhci_hcd and
address 2
[ 8.554846] usbhid 5-1:1.0: couldn't find an input interrupt endpoint
[ 8.615707] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0019e3fffe2ad87e]
[ 8.681077] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt
64 rq 0 len 0 ret -84
[ 8.705141] usb 5-1: USB disconnect, address 2
[ 8.916170] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 9.009347] Adding 390616k swap on /dev/sda4. Priority:1 extents:1
across:390616k
[ 9.411314] usb 5-1: new full speed USB device using uhci_hcd and
address 3
[ 10.944574] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.981399] nf_conntrack version 0.5.0 (7884 buckets, 31536 max)
[ 10.984245] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 10.984248] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
module option or
[ 10.984250] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 13.176234] applesmc: light sensor data length set to 6
[ 16.399290] sky2 eth0: enabling interface
[ 19.924510] type=1100 audit(1273564330.924:3): user pid=2016 uid=0
auid=4294967295 ses=4294967295
subj=system_u:system_r:local_login_t:s0-s0:c0.c255
msg='op=PAM:authentication acct="name" exe="/bin/login" hostname=?
addr=? terminal=/dev/tty1 res=success'
[ 19.934946] type=1101 audit(1273564330.934:4): user pid=2016 uid=0
auid=4294967295 ses=4294967295
subj=system_u:system_r:local_login_t:s0-s0:c0.c255
msg='op=PAM:accounting acct="name" exe="/bin/login" hostname=? addr=?
terminal=/dev/tty1 res=success'
[ 20.009616] type=1006 audit(1273564331.009:5): login pid=2016 uid=0
old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1
[ 20.095026] type=2300 audit(1273564331.094:6): user pid=2016 uid=0
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255
msg='pam: default-context=name:staff_r:staff_t:s0
selected-context=name:staff_r:staff_t:s0: exe="/bin/login" hostname=?
addr=? terminal=tty1 res=success'
[ 20.178135] type=1105 audit(1273564331.178:7): user pid=2016 uid=0
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255
msg='op=PAM:session_open acct="name" exe="/bin/login" hostname=? addr=?
terminal=/dev/tty1 res=success'
[ 20.191074] type=1103 audit(1273564331.190:8): user pid=2016 uid=0
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255
msg='op=PAM:setcred acct="name" exe="/bin/login" hostname=? addr=?
terminal=/dev/tty1 res=success'
[ 20.191379] type=1112 audit(1273564331.191:9): user pid=2016 uid=0
auid=1000 ses=1 subj=system_u:system_r:local_login_t:s0-s0:c0.c255
msg='op=login acct="name" exe="/bin/login" hostname=? addr=?
terminal=/dev/tty1 res=success'
[ 22.308976] wlan0: direct probe to AP 00:1e:2a:00:67:f0 (try 1)
[ 22.311733] wlan0: direct probe responded
[ 22.311741] wlan0: authenticate with AP 00:1e:2a:00:67:f0 (try 1)
[ 22.318090] wlan0: authenticated
[ 22.318223] wlan0: associate with AP 00:1e:2a:00:67:f0 (try 1)
[ 22.320730] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431
status=0 aid=1)
[ 22.320736] wlan0: associated
[ 23.713535] [drm] Initialized drm 1.1.0 20060810
[ 23.849540] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.849545] Bluetooth: BNEP filters: protocol multicast
[ 23.928446] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.928449] Bluetooth: SCO socket layer initialized
[ 23.929616] [drm] radeon defaulting to userspace modesetting.
[ 23.930408] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 23.930416] pci 0000:01:00.0: setting latency timer to 64
[ 23.930766] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0
on minor 0
[ 24.156429] [drm] Setting GART location based on new memory map
[ 24.158069] [drm] Loading R500 Microcode
[ 24.158077] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 24.295079] [drm] Num pipes: 1
[ 24.295092] [drm] writeback test succeeded in 1 usecs
[ 27.435674] magicmouse 0005:05AC:030D.0004: claimed by neither input,
hiddev nor hidraw
[ 27.435686] magicmouse 0005:05AC:030D.0004: magicmouse hw start failed
[ 27.435753] type=1400 audit(1273564338.435:10): avc: denied {
search } for pid=2105 comm="bluetoothd" name="hid" dev=debugfs ino=1056
scontext=system_u:system_r:bluetooth_t:s0-s0:c0.c255
tcontext=system_u:object_r:debugfs_t:s0 tclass=dir
[ 27.435927] type=1300 audit(1273564338.435:10): arch=c000003e
syscall=16 success=yes exit=0 a0=18 a1=400448c8 a2=7fd2680460f0 a3=10
items=0 ppid=1 pid=2105 auid=4294967295 uid=0 gid=0 euid=0 suid=0
fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295
comm="bluetoothd" exe="/usr/sbin/bluetoothd"
subj=system_u:system_r:bluetooth_t:s0-s0:c0.c255 key=(null)
[ 74.910194] usb 2-1: new low speed USB device using uhci_hcd and
address 3
[ 75.094202] input: Mitsumi Electric Apple Optical USB Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input9
[ 75.094598] apple 0003:05AC:0304.0005: input: USB HID v1.10 Mouse
[Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.0-1/input0
I'm a bit tired now.. will test commits
in the morning over here with git revert
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/