Re: [lm-sensors] [PATCH] hwmon: Add tempX_emergency to sysfs ABI

[Guenter Roeck]

On Thu, Aug 26, 2010 at 12:10:23PM -0400, Henrique de Moraes Holschuh wrote:
> On Thu, 26 Aug 2010, Guenter Roeck wrote:
> > Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
> > ---
> > tempX_emergency will be used by max6696. It can also be used for other chips
> > supporting three upper temperature limits.
> > 
> >  Documentation/hwmon/sysfs-interface |    6 ++++++
> >  1 files changed, 6 insertions(+), 0 deletions(-)
> > 
> > diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
> > index ff45d1f..1ceb2b9 100644
> > --- a/Documentation/hwmon/sysfs-interface
> > +++ b/Documentation/hwmon/sysfs-interface
> > @@ -310,6 +310,12 @@ temp[1-*]_crit_hyst
> >  		from the critical value.
> >  		RW
> >  
> > +temp[1-*]_emergency
> > +		Temperature emergency value, typically greater than
> > +		corresponding temp_crit values.
> > +		Unit: millidegree Celsius
> > +		RW
> > +
> 
> If we have two-level alarms: critical, then emergency, it is best to have
> that written down than to imply it by "typically greater than corresponding
> temp_crit"...
> 
Do you have a better wording in mind ?

Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/