Re: [PATCH] input: Synaptics USB device driver
From: Dmitry Torokhov
Date: Wed Jan 04 2012 - 04:41:14 EST
On Wed, Jan 04, 2012 at 10:20:41AM +0100, Oliver Neukum wrote:
> Am Mittwoch, 4. Januar 2012, 09:55:19 schrieb Jiri Kosina:
> > On Tue, 3 Jan 2012, Jan Steinhoff wrote:
> >
> > [ ... snip ... ]
> > > +static int synusb_setup_iurb(struct synusb *synusb,
> > > + struct usb_endpoint_descriptor *endpoint)
> > > +{
> > > + char *buf;
> > > +
> > > + if (endpoint->wMaxPacketSize < 8)
> > > + return 0;
> > > + if (synusb->iurb) {
> > > + synusb_warn(synusb, "Found more than one possible "
> > > + "int in endpoint");
> > > + return 0;
> > > + }
> > > + synusb->iurb = usb_alloc_urb(0, GFP_KERNEL);
> > > + if (synusb->iurb == NULL)
> > > + return -ENOMEM;
> > > + buf = usb_alloc_coherent(synusb->udev, 8, GFP_ATOMIC,
> > > + &synusb->iurb->transfer_dma);
> > > + if (buf == NULL)
> > > + return -ENOMEM;
> >
> > You seem to leak synusb->iurb here.
>
> Seems so, but doesn't. It gets freed when the refcount hits 0.
> Now, whether this is a good technique is another question.
Om, so I have been looking at the driver and the following seems to be
still working with my Lenovo composite touchpad/stick.
Changes:
- the stick is reported in relative mode; we might consider addig
sensitivity control similar to trackpoint driver. Press-to-select -
maybe in driver, or in client; undecided.
- got rid of BTN_MISC/BTN_MIDDLE option (at least for now);
- added devices to HID blacklist;
- runtime PM (hopefully I got it right);
- open/close.
Still TODO:
- query device for supported rages instead of having module parameters.
Thanks.
--
Dmitry
Input: Synaptics USB device driver
From: Jan Steinhoff <mail@xxxxxxxxxxxxxxxx>
This patch adds a driver for Synaptics USB touchpad or pointing stick
devices. These USB devices emulate an USB mouse by default, so one can
also use the usbhid driver. However, in combination with special user
space drivers this kernel driver allows one to customize the behaviour
of the device.
An extended version of this driver with support for the cPad background
display can be found at
<http://jan-steinhoff.de/linux/synaptics-usb.html>.
Signed-off-by: Jan Steinhoff <mail@xxxxxxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---
drivers/hid/hid-core.c | 9 +
drivers/hid/hid-ids.h | 11 +
drivers/input/mouse/Kconfig | 14 +
drivers/input/mouse/Makefile | 1
drivers/input/mouse/synaptics_usb.c | 529 +++++++++++++++++++++++++++++++++++
5 files changed, 564 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/mouse/synaptics_usb.c
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index af35384..75f207c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1892,6 +1892,15 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_INT_TP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_CPAD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_TS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_STICK) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_WP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_COMP_TP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_WTP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_DPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4a441a6..b48a64b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -633,6 +633,17 @@
#define USB_DEVICE_ID_SYMBOL_SCANNER_1 0x0800
#define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300
+#define USB_VENDOR_ID_SYNAPTICS 0x06cb
+#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001
+#define USB_DEVICE_ID_SYNAPTICS_INT_TP 0x0002
+#define USB_DEVICE_ID_SYNAPTICS_CPAD 0x0003
+#define USB_DEVICE_ID_SYNAPTICS_TS 0x0006
+#define USB_DEVICE_ID_SYNAPTICS_STICK 0x0007
+#define USB_DEVICE_ID_SYNAPTICS_WP 0x0008
+#define USB_DEVICE_ID_SYNAPTICS_COMP_TP 0x0009
+#define USB_DEVICE_ID_SYNAPTICS_WTP 0x0010
+#define USB_DEVICE_ID_SYNAPTICS_DPAD 0x0013
+
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TOPSEED 0x0766
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 9c1e6ee..f258089 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -322,4 +322,18 @@ config MOUSE_SYNAPTICS_I2C
To compile this driver as a module, choose M here: the
module will be called synaptics_i2c.
+config MOUSE_SYNAPTICS_USB
+ tristate "Synaptics USB device support"
+ depends on USB
+ help
+ Say Y here if you want to use a Synaptics USB touchpad or pointing stick.
+ These Synaptics USB devices emulate an USB mouse by default, so you can
+ also use the usbhid driver. However, in combination with special X.Org
+ drivers this kernel driver allows you to customize the behaviour of the
+ device. More information can be found at:
+ <http://jan-steinhoff.de/linux/synaptics-usb.html>
+
+ To compile this driver as a module, choose M here: the
+ module will be called synaptics_usb.
+
endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 570c84a4..4718eff 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o
+obj-$(CONFIG_MOUSE_SYNAPTICS_USB) += synaptics_usb.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
psmouse-objs := psmouse-base.o synaptics.o
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
new file mode 100644
index 0000000..a414fa2
--- /dev/null
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -0,0 +1,529 @@
+/****
+ * USB Synaptics device driver
+ *
+ * Copyright (c) 2002 Rob Miller (rob@inpharmatica . co . uk)
+ * Copyright (c) 2003 Ron Lee (ron@xxxxxxxxxx)
+ * cPad driver for kernel 2.4
+ *
+ * Copyright (c) 2004 Jan Steinhoff (cpad@jan-steinhoff . de)
+ * Copyright (c) 2004 Ron Lee (ron@xxxxxxxxxx)
+ * rewritten for kernel 2.6
+ *
+ * cPad display character device part is not included. It can be found at
+ * http://jan-steinhoff.de/linux/synaptics-usb.html
+ *
+ * Bases on: usb_skeleton.c v2.2 by Greg Kroah-Hartman
+ * drivers/hid/usbhid/usbmouse.c by Vojtech Pavlik
+ * drivers/input/mouse/synaptics.c by Peter Osterlund
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+/****
+ * There are three different types of Synaptics USB devices: Touchpads,
+ * touchsticks (or trackpoints), and touchscreens. Touchpads are well supported
+ * by this driver, touchstick support has not been tested much yet, and
+ * touchscreens have not been tested at all. The only difference between pad
+ * and stick seems to be that the x and y finger positions are unsigned 13 bit
+ * integers in the first case, but are signed ones in the second case.
+ *
+ * Up to three alternate settings are possible:
+ * setting 0: one int endpoint for relative movement (used by usbhid.ko)
+ * setting 1: one int endpoint for absolute finger position
+ * setting 2 (cPad only): one int endpoint for absolute finger position and
+ * two bulk endpoints for the display (in/out)
+ * This driver uses setting 1.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/usb/input.h>
+
+#define USB_VENDOR_ID_SYNAPTICS 0x06cb
+#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 /* Synaptics USB TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_INT_TP 0x0002 /* Integrated USB TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_CPAD 0x0003 /* Synaptics cPad */
+#define USB_DEVICE_ID_SYNAPTICS_TS 0x0006 /* Synaptics TouchScreen */
+#define USB_DEVICE_ID_SYNAPTICS_STICK 0x0007 /* Synaptics USB Styk */
+#define USB_DEVICE_ID_SYNAPTICS_WP 0x0008 /* Synaptics USB WheelPad */
+#define USB_DEVICE_ID_SYNAPTICS_COMP_TP 0x0009 /* Composite USB TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_WTP 0x0010 /* Wireless TouchPad */
+#define USB_DEVICE_ID_SYNAPTICS_DPAD 0x0013 /* DisplayPad */
+
+#define SYNUSB_TOUCHPAD (1 << 0)
+#define SYNUSB_STICK (1 << 1)
+#define SYNUSB_TOUCHSCREEN (1 << 2)
+#define SYNUSB_AUXDISPLAY (1 << 3) /* For cPad */
+
+#define USB_DEVICE_SYNAPTICS(prod, kind) \
+ USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, \
+ USB_DEVICE_ID_SYNAPTICS_##prod), \
+ .driver_info = (kind),
+
+#define SYNUSB_RECV_SIZE 8
+
+MODULE_PARM_DESC(xmin, "minimal horizontal finger position for touchpads");
+MODULE_PARM_DESC(xmax, "maximal horizontal finger position for touchpads");
+MODULE_PARM_DESC(ymin, "minimal vertical finger position for touchpads");
+MODULE_PARM_DESC(ymax, "maximal vertical finger position for touchpads");
+static int xmin = 1472;
+static int xmax = 5472;
+static int ymin = 1408;
+static int ymax = 4448;
+module_param(xmin, int, 0444);
+module_param(xmax, int, 0444);
+module_param(ymin, int, 0444);
+module_param(ymax, int, 0444);
+
+struct synusb {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct urb *urb;
+ unsigned char *data;
+
+ /* input device related data structures */
+ struct input_dev *input;
+ char name[128];
+ char phys[64];
+
+ /* characteristics of the device */
+ unsigned long flags;
+};
+
+static void synusb_report_buttons(struct synusb *synusb)
+{
+ struct input_dev *input_dev = synusb->input;
+
+ input_report_key(input_dev, BTN_LEFT, synusb->data[1] & 0x04);
+ input_report_key(input_dev, BTN_RIGHT, synusb->data[1] & 0x01);
+ input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x02);
+ if (synusb->flags & SYNUSB_AUXDISPLAY)
+ input_report_key(input_dev, BTN_MISC, synusb->data[1] & 0x08);
+}
+
+static void synusb_report_stick(struct synusb *synusb)
+{
+ struct input_dev *input_dev = synusb->input;
+ int x, y;
+ unsigned int pressure;
+
+ pressure = synusb->data[6];
+ x = (s16)(be16_to_cpup((__be16 *)&synusb->data[2]) << 3) >> 7;
+ y = (s16)(be16_to_cpup((__be16 *)&synusb->data[4]) << 3) >> 7;
+
+ if (pressure > 0) {
+ input_report_rel(input_dev, REL_X, x);
+ input_report_rel(input_dev, REL_Y, -y);
+ }
+
+ input_report_abs(input_dev, ABS_PRESSURE, pressure);
+
+ synusb_report_buttons(synusb);
+
+ input_sync(input_dev);
+}
+
+static void synusb_report_touchpad(struct synusb *synusb)
+{
+ struct input_dev *input_dev = synusb->input;
+ unsigned int num_fingers, tool_width;
+ unsigned int x, y;
+ unsigned int pressure, w;
+
+ pressure = synusb->data[6];
+ x = be16_to_cpup((__be16 *)&synusb->data[2]);
+ y = be16_to_cpup((__be16 *)&synusb->data[4]);
+ w = synusb->data[0] & 0x0f;
+
+ if (pressure > 0) {
+ num_fingers = 1;
+ tool_width = 5;
+ switch (w) {
+ case 0 ... 1:
+ num_fingers = 2 + w;
+ break;
+
+ case 2: /* pen, pretend its a finger */
+ break;
+
+ case 4 ... 15:
+ tool_width = w;
+ break;
+ }
+ } else {
+ num_fingers = 0;
+ tool_width = 0;
+ }
+
+ /*
+ * Post events
+ * BTN_TOUCH has to be first as mousedev relies on it when doing
+ * absolute -> relative conversion
+ */
+
+ if (pressure > 30)
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ if (pressure < 25)
+ input_report_key(input_dev, BTN_TOUCH, 0);
+
+ if (num_fingers > 0) {
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, ymin + ymax - y);
+ }
+
+ input_report_abs(input_dev, ABS_PRESSURE, pressure);
+ input_report_abs(input_dev, ABS_TOOL_WIDTH, tool_width);
+
+ input_report_key(input_dev, BTN_TOOL_FINGER, num_fingers == 1);
+ input_report_key(input_dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
+ input_report_key(input_dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
+
+ synusb_report_buttons(synusb);
+
+ input_sync(input_dev);
+}
+
+static void synusb_irq(struct urb *urb)
+{
+ struct synusb *synusb = urb->context;
+ int error;
+
+ /* Check our status in case we need to bail out early. */
+ switch (urb->status) {
+ case 0:
+ usb_mark_last_busy(synusb->udev);
+ break;
+
+ case -EOVERFLOW:
+ dev_err(&synusb->intf->dev,
+ "%s: OVERFLOW with data length %d, actual length is %d\n",
+ __func__, SYNUSB_RECV_SIZE, urb->actual_length);
+
+ /* Device went away so don't keep trying to read from it. */
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ goto resubmit;
+ break;
+ }
+
+ if (synusb->flags & SYNUSB_STICK)
+ synusb_report_stick(synusb);
+ else
+ synusb_report_touchpad(synusb);
+
+resubmit:
+ error = usb_submit_urb(urb, GFP_ATOMIC);
+ if (error && error != -EPERM)
+ dev_err(&synusb->intf->dev,
+ "%s - usb_submit_urb failed with result: %d",
+ __func__, error);
+}
+
+static struct usb_endpoint_descriptor *
+synusb_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+
+ for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+ endpoint = &iface->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(endpoint)) {
+ /* we found our interrupt in endpoint */
+ return endpoint;
+ }
+ }
+
+ return NULL;
+}
+
+static int synusb_open(struct input_dev *dev)
+{
+ struct synusb *synusb = input_get_drvdata(dev);
+ int retval = 0;
+
+ dev_err(&synusb->intf->dev, "%s\n", __func__);
+
+ if (usb_autopm_get_interface(synusb->intf) < 0)
+ return -EIO;
+
+ if (usb_submit_urb(synusb->urb, GFP_KERNEL)) {
+ dev_err(&synusb->intf->dev,
+ "%s - usb_submit_urb failed", __func__);
+ retval = -EIO;
+ goto out;
+ }
+
+ synusb->intf->needs_remote_wakeup = 1;
+
+out:
+ usb_autopm_put_interface(synusb->intf);
+ dev_err(&synusb->intf->dev, "%s done: %d\n", __func__, retval);
+ return retval;
+}
+
+static void synusb_close(struct input_dev *dev)
+{
+ struct synusb *synusb = input_get_drvdata(dev);
+ int autopm_error;
+
+ autopm_error = usb_autopm_get_interface(synusb->intf);
+
+ usb_kill_urb(synusb->urb);
+ synusb->intf->needs_remote_wakeup = 0;
+
+ if (!autopm_error)
+ usb_autopm_put_interface(synusb->intf);
+}
+
+static int synusb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *ep;
+ struct synusb *synusb;
+ struct input_dev *input_dev;
+ unsigned int intf_num = intf->cur_altsetting->desc.bInterfaceNumber;
+ unsigned int altsetting = min(intf->num_altsetting, 1U);
+ int error;
+
+ error = usb_set_interface(udev, intf_num, altsetting);
+ if (error) {
+ dev_err(&udev->dev,
+ "Can not set alternate setting to %i, error: %i",
+ altsetting, error);
+ return error;
+ }
+
+ ep = synusb_get_in_endpoint(intf->cur_altsetting);
+ if (!ep)
+ return -ENODEV;
+
+ synusb = kzalloc(sizeof(*synusb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!synusb || !input_dev) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ synusb->udev = udev;
+ synusb->intf = intf;
+ synusb->input = input_dev;
+
+ synusb->flags = id->driver_info;
+ if (test_bit(SYNUSB_STICK, &synusb->flags) &&
+ test_bit(SYNUSB_STICK, &synusb->flags)) {
+ /*
+ * This is a combo device, we need to leave only proper
+ * capability, depending on the interface.
+ */
+ clear_bit(intf_num == 1 ? SYNUSB_TOUCHPAD : SYNUSB_STICK,
+ &synusb->flags);
+ }
+
+ synusb->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!synusb->urb) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ synusb->data = usb_alloc_coherent(udev, SYNUSB_RECV_SIZE, GFP_KERNEL,
+ &synusb->urb->transfer_dma);
+ if (!synusb->data) {
+ error = -ENOMEM;
+ goto err_free_urb;
+ }
+
+ usb_fill_int_urb(synusb->urb, udev,
+ usb_rcvintpipe(udev, ep->bEndpointAddress),
+ synusb->data, SYNUSB_RECV_SIZE,
+ synusb_irq, synusb,
+ ep->bInterval);
+ synusb->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ if (udev->manufacturer)
+ strlcpy(synusb->name, udev->manufacturer,
+ sizeof(synusb->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(synusb->name, " ", sizeof(synusb->name));
+ strlcat(synusb->name, udev->product, sizeof(synusb->name));
+ }
+
+ if (!strlen(synusb->name))
+ snprintf(synusb->name, sizeof(synusb->name),
+ "USB Synaptics Device %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ if (synusb->flags & SYNUSB_STICK)
+ strlcat(synusb->name, " (Stick) ", sizeof(synusb->name));
+
+ usb_make_path(udev, synusb->phys, sizeof(synusb->phys));
+ strlcat(synusb->phys, "/input0", sizeof(synusb->phys));
+
+ input_dev->name = synusb->name; // synusb_get_name(synusb);
+ input_dev->phys = synusb->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &synusb->intf->dev;
+
+ input_dev->open = synusb_open;
+ input_dev->close = synusb_close;
+
+ input_set_drvdata(input_dev, synusb);
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+
+ if (synusb->flags & SYNUSB_STICK) {
+ __set_bit(EV_REL, input_dev->evbit);
+ __set_bit(REL_X, input_dev->relbit);
+ __set_bit(REL_Y, input_dev->relbit);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0);
+ } else {
+ input_set_abs_params(input_dev, ABS_X, xmin, xmax, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, ymin, ymax, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ }
+
+ __set_bit(BTN_LEFT, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+ __set_bit(BTN_MIDDLE, input_dev->keybit);
+ if (synusb->flags & SYNUSB_AUXDISPLAY)
+ __set_bit(BTN_MISC, input_dev->keybit);
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&udev->dev, "Failed to register input device, error %d\n",
+ error);
+ goto err_free_dma;
+ }
+
+ usb_set_intfdata(intf, synusb);
+ return 0;
+
+err_free_dma:
+ usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data,
+ synusb->urb->transfer_dma);
+err_free_urb:
+ usb_free_urb(synusb->urb);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(synusb);
+
+ return error;
+}
+
+static void synusb_disconnect(struct usb_interface *intf)
+{
+ struct synusb *synusb = usb_get_intfdata(intf);
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ input_unregister_device(synusb->input);
+
+ usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data,
+ synusb->urb->transfer_dma);
+ usb_free_urb(synusb->urb);
+
+ kfree(synusb);
+}
+
+static int synusb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct synusb *synusb = usb_get_intfdata(intf);
+ struct input_dev *input_dev = synusb->input;
+
+ mutex_lock(&input_dev->mutex);
+ usb_kill_urb(synusb->urb);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static int synusb_resume(struct usb_interface *intf)
+{
+ struct synusb *synusb = usb_get_intfdata(intf);
+ struct input_dev *input_dev = synusb->input;
+ int rv = 0;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users && usb_submit_urb(synusb->urb, GFP_NOIO) < 0)
+ rv = -EIO;
+
+ mutex_unlock(&input_dev->mutex);
+
+ return rv;
+}
+
+static int synusb_reset_resume(struct usb_interface *intf)
+{
+ return synusb_resume(intf);
+}
+
+static struct usb_device_id synusb_idtable[] = {
+ { USB_DEVICE_SYNAPTICS(TP, SYNUSB_TOUCHPAD) },
+ { USB_DEVICE_SYNAPTICS(INT_TP, SYNUSB_TOUCHPAD) },
+ { USB_DEVICE_SYNAPTICS(CPAD, SYNUSB_TOUCHPAD | SYNUSB_AUXDISPLAY) },
+ { USB_DEVICE_SYNAPTICS(TS, SYNUSB_TOUCHSCREEN) },
+ { USB_DEVICE_SYNAPTICS(STICK, SYNUSB_STICK) },
+ { USB_DEVICE_SYNAPTICS(WP, SYNUSB_TOUCHPAD) },
+ { USB_DEVICE_SYNAPTICS(COMP_TP, SYNUSB_TOUCHPAD | SYNUSB_STICK) },
+ { USB_DEVICE_SYNAPTICS(WTP, SYNUSB_TOUCHPAD) },
+ { USB_DEVICE_SYNAPTICS(DPAD, SYNUSB_TOUCHPAD) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, synusb_idtable);
+
+static struct usb_driver synusb_driver = {
+ .name = "synaptics_usb",
+ .probe = synusb_probe,
+ .disconnect = synusb_disconnect,
+ .id_table = synusb_idtable,
+ .suspend = synusb_suspend,
+ .resume = synusb_resume,
+ .reset_resume = synusb_reset_resume,
+ .supports_autosuspend = 1,
+};
+
+static int __init synusb_init(void)
+{
+ return usb_register(&synusb_driver);
+}
+
+static void __exit synusb_exit(void)
+{
+ usb_deregister(&synusb_driver);
+}
+
+module_init(synusb_init);
+module_exit(synusb_exit);
+
+MODULE_AUTHOR("Rob Miller <rob@xxxxxxxxxxxxxxxxxx>, "
+ "Ron Lee <ron@xxxxxxxxxx>, "
+ "Jan Steinhoff <cpad@xxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Synaptics USB device driver");
+MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/