[PATCH V1] regulator: tps65910: Correct VIO voltage configuration

[Laxman Dewangan]

The VIO regulator register specify the voltage configuration
on bit3:2 of its register. And hence only these bits should
be modified when setting voltage and used when reading voltage
from register setting.

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
 drivers/regulator/tps65910-regulator.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 9092b7f..a9bb6d4 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -674,8 +674,9 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
 		step_mv = 100;
 		break;
 	case TPS65910_REG_VIO:
+		value &= LDO_SEL_MASK;
+		value >>= LDO_SEL_SHIFT;
 		return pmic->info[id]->voltage_table[value] * 1000;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -767,9 +768,11 @@ static int tps65911_set_voltage(struct regulator_dev *dev, unsigned selector)
 	case TPS65911_REG_LDO6:
 	case TPS65911_REG_LDO7:
 	case TPS65911_REG_LDO8:
-	case TPS65910_REG_VIO:
 		return tps65910_modify_bits(pmic, reg,
 				(selector << LDO_SEL_SHIFT), LDO3_SEL_MASK);
+	case TPS65910_REG_VIO:
+		return tps65910_modify_bits(pmic, reg,
+				(selector << LDO_SEL_SHIFT), LDO_SEL_MASK);
 	}
 
 	return -EINVAL;
-- 
1.7.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/