[PATCH v7 3/3] clk: basic clock hardware types

[Mike Turquette]

Many platforms support simple gateable clocks, fixed-rate clocks,
adjustable divider clocks and multi-parent multiplexer clocks.

This patch introduces basic clock types for the above-mentioned hardware
which share some common characteristics.

Based on original work by Jeremy Kerr and contribution by Jamie Iles.
Dividers and multiplexor clocks originally contributed by Richard Zhao &
Sascha Hauer.

Signed-off-by: Mike Turquette <mturquette@xxxxxxxxxx>
Signed-off-by: Mike Turquette <mturquette@xxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Tested-by: Andrew Lunn <andrew@xxxxxxx>
Reviewed-by: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Arnd Bergman <arnd.bergmann@xxxxxxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Jamie Iles <jamie@xxxxxxxxxxxxx>
Cc: Richard Zhao <richard.zhao@xxxxxxxxxx>
Cc: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
Cc: Magnus Damm <magnus.damm@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Cc: Deepak Saxena <dsaxena@xxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
---
Changes since v6:
 * fixed up clk_divider's .round_rate logic (thanks Sascha)
 * removed useless locking around basic clock types

Changes since v5:
 * standardized the hw-specific locking in the basic clock types
 * export the individual ops for each basic clock type
 * improve registration for single-parent basic clocks (thanks Sascha)
 * fixed bugs in gate clock's static initializers (thanks Andrew)

 drivers/clk/Makefile         |    3 +-
 drivers/clk/clk-divider.c    |  200 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/clk-fixed-rate.c |   82 +++++++++++++++++
 drivers/clk/clk-gate.c       |  150 +++++++++++++++++++++++++++++++
 drivers/clk/clk-mux.c        |  116 ++++++++++++++++++++++++
 include/linux/clk-private.h  |  124 ++++++++++++++++++++++++++
 include/linux/clk-provider.h |  127 ++++++++++++++++++++++++++
 7 files changed, 801 insertions(+), 1 deletions(-)
 create mode 100644 drivers/clk/clk-divider.c
 create mode 100644 drivers/clk/clk-fixed-rate.c
 create mode 100644 drivers/clk/clk-gate.c
 create mode 100644 drivers/clk/clk-mux.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ff362c4..1f736bc 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,3 +1,4 @@
 
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
-obj-$(CONFIG_COMMON_CLK)	+= clk.o
+obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
+				   clk-mux.o clk-divider.o
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
new file mode 100644
index 0000000..d5ac6a7
--- /dev/null
+++ b/drivers/clk/clk-divider.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@xxxxxxxxxxxxxx>
+ * Copyright (C) 2011 Richard Zhao, Linaro <richard.zhao@xxxxxxxxxx>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable divider clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/*
+ * DOC: basic adjustable divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.  clk->rate = parent->rate / divisor
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+#define div_mask(d)	((1 << (d->width)) - 1)
+
+static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	unsigned int div;
+
+	div = readl(divider->reg) >> divider->shift;
+	div &= div_mask(divider);
+
+	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
+		div++;
+
+	return parent_rate / div;
+}
+EXPORT_SYMBOL_GPL(clk_divider_recalc_rate);
+
+/*
+ * The reverse of DIV_ROUND_UP: The maximum number which
+ * divided by m is r
+ */
+#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
+
+static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
+		unsigned long *best_parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	int i, bestdiv = 0;
+	unsigned long parent_rate, best = 0, now, maxdiv;
+
+	if (!rate)
+		rate = 1;
+
+	maxdiv = (1 << divider->width);
+
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		maxdiv--;
+
+	if (!best_parent_rate) {
+		parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+		bestdiv = DIV_ROUND_UP(parent_rate, rate);
+		bestdiv = bestdiv == 0 ? 1 : bestdiv;
+		bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
+		return bestdiv;
+	}
+
+	/*
+	 * The maximum divider we can use without overflowing
+	 * unsigned long in rate * i below
+	 */
+	maxdiv = min(ULONG_MAX / rate, maxdiv);
+
+	for (i = 1; i <= maxdiv; i++) {
+		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
+				MULT_ROUND_UP(rate, i));
+		now = parent_rate / i;
+		if (now <= rate && now > best) {
+			bestdiv = i;
+			best = now;
+			*best_parent_rate = parent_rate;
+		}
+	}
+
+	if (!bestdiv) {
+		bestdiv = (1 << divider->width);
+		if (divider->flags & CLK_DIVIDER_ONE_BASED)
+			bestdiv--;
+		*best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1);
+	}
+
+	return bestdiv;
+}
+
+static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	int div;
+	div = clk_divider_bestdiv(hw, rate, prate);
+
+	if (prate)
+		return *prate / div;
+	else {
+		unsigned long r;
+		r = __clk_get_rate(__clk_get_parent(hw->clk));
+		return r / div;
+	}
+}
+EXPORT_SYMBOL_GPL(clk_divider_round_rate);
+
+static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	unsigned int div;
+	unsigned long flags = 0;
+	u32 val;
+
+	div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate;
+
+	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
+		div--;
+
+	if (div > div_mask(divider))
+		div = div_mask(divider);
+
+	if (divider->lock)
+		spin_lock_irqsave(divider->lock, flags);
+
+	val = readl(divider->reg);
+	val &= ~(div_mask(divider) << divider->shift);
+	val |= div << divider->shift;
+	writel(val, divider->reg);
+
+	if (divider->lock)
+		spin_unlock_irqrestore(divider->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_divider_set_rate);
+
+struct clk_ops clk_divider_ops = {
+	.recalc_rate = clk_divider_recalc_rate,
+	.round_rate = clk_divider_round_rate,
+	.set_rate = clk_divider_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_divider_ops);
+
+struct clk *clk_register_divider(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, spinlock_t *lock)
+{
+	struct clk_divider *div;
+	struct clk *clk;
+
+	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
+
+	if (!div) {
+		pr_err("%s: could not allocate divider clk\n", __func__);
+		return NULL;
+	}
+
+	/* struct clk_divider assignments */
+	div->reg = reg;
+	div->shift = shift;
+	div->width = width;
+	div->flags = clk_divider_flags;
+	div->lock = lock;
+
+	if (parent_name) {
+		div->parent[0] = kstrdup(parent_name, GFP_KERNEL);
+		if (!div->parent[0])
+			goto out;
+	}
+
+	clk = clk_register(dev, name,
+			&clk_divider_ops, &div->hw,
+			div->parent,
+			(parent_name ? 1 : 0),
+			flags);
+	if (clk)
+		return clk;
+
+out:
+	kfree(div->parent[0]);
+	kfree(div);
+
+	return NULL;
+}
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
new file mode 100644
index 0000000..90c79fb
--- /dev/null
+++ b/drivers/clk/clk-fixed-rate.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@xxxxxxxxxxxxx>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Fixed rate clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic fixed-rate clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parents are prepared
+ * enable - clk_enable only ensures parents are enabled
+ * rate - rate is always a fixed value.  No clk_set_rate support
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw)
+
+static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return to_clk_fixed_rate(hw)->fixed_rate;
+}
+EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate);
+
+struct clk_ops clk_fixed_rate_ops = {
+	.recalc_rate = clk_fixed_rate_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
+
+struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned long fixed_rate)
+{
+	struct clk_fixed_rate *fixed;
+	char **parent_names = NULL;
+	u8 len;
+
+	fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
+
+	if (!fixed) {
+		pr_err("%s: could not allocate fixed clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_fixed_rate assignments */
+	fixed->fixed_rate = fixed_rate;
+
+	if (parent_name) {
+		parent_names = kmalloc(sizeof(char *), GFP_KERNEL);
+
+		if (! parent_names)
+			goto out;
+
+		len = sizeof(char) * strlen(parent_name);
+
+		parent_names[0] = kmalloc(len, GFP_KERNEL);
+
+		if (!parent_names[0])
+			goto out;
+
+		strncpy(parent_names[0], parent_name, len);
+	}
+
+out:
+	return clk_register(dev, name,
+			&clk_fixed_rate_ops, &fixed->hw,
+			parent_names,
+			(parent_name ? 1 : 0),
+			flags);
+}
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
new file mode 100644
index 0000000..b5902e2
--- /dev/null
+++ b/drivers/clk/clk-gate.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@xxxxxxxxxxxxx>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent.  No clk_set_rate support
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static void clk_gate_set_bit(struct clk_gate *gate)
+{
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg |= BIT(gate->bit_idx);
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static void clk_gate_clear_bit(struct clk_gate *gate)
+{
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg &= ~BIT(gate->bit_idx);
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+
+	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
+		clk_gate_clear_bit(gate);
+	else
+		clk_gate_set_bit(gate);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_gate_enable);
+
+static void clk_gate_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+
+	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
+		clk_gate_set_bit(gate);
+	else
+		clk_gate_clear_bit(gate);
+}
+EXPORT_SYMBOL_GPL(clk_gate_disable);
+
+static int clk_gate_is_enabled(struct clk_hw *hw)
+{
+	u32 reg;
+	struct clk_gate *gate = to_clk_gate(hw);
+
+	reg = readl(gate->reg);
+
+	/* if a set bit disables this clk, flip it before masking */
+	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
+		reg ^= BIT(gate->bit_idx);
+
+	reg &= BIT(gate->bit_idx);
+
+	return reg ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(clk_gate_is_enabled);
+
+struct clk_ops clk_gate_ops = {
+	.enable = clk_gate_enable,
+	.disable = clk_gate_disable,
+	.is_enabled = clk_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_gate_ops);
+
+struct clk *clk_register_gate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk *clk;
+
+	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+
+	if (!gate) {
+		pr_err("%s: could not allocate gated clk\n", __func__);
+		return NULL;
+	}
+
+	/* struct clk_gate assignments */
+	gate->reg = reg;
+	gate->bit_idx = bit_idx;
+	gate->flags = clk_gate_flags;
+	gate->lock = lock;
+
+	if (parent_name) {
+		gate->parent[0] = kstrdup(parent_name, GFP_KERNEL);
+		if (!gate->parent[0])
+			goto out;
+	}
+
+	clk = clk_register(dev, name,
+			&clk_gate_ops, &gate->hw,
+			gate->parent,
+			(parent_name ? 1 : 0),
+			flags);
+	if (clk)
+		return clk;
+out:
+	kfree(gate->parent[0]);
+	kfree(gate);
+
+	return NULL;
+}
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
new file mode 100644
index 0000000..c71ad1f
--- /dev/null
+++ b/drivers/clk/clk-mux.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@xxxxxxxxxxxxxx>
+ * Copyright (C) 2011 Richard Zhao, Linaro <richard.zhao@xxxxxxxxxx>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simple multiplexer clock implementation
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic adjustable multiplexer clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is only affected by parent switching.  No clk_set_rate support
+ * parent - parent is adjustable through clk_set_parent
+ */
+
+#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
+
+static u8 clk_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+	u32 val;
+
+	/*
+	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
+	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
+	 * to 0x7 (index starts at one)
+	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
+	 * val = 0x4 really means "bit 2, index starts at bit 0"
+	 */
+	val = readl(mux->reg) >> mux->shift;
+	val &= (1 << mux->width) - 1;
+
+	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+		val = ffs(val) - 1;
+
+	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+		val--;
+
+	if (val >= __clk_get_num_parents(hw->clk))
+		return -EINVAL;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
+
+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+	u32 val;
+	unsigned long flags = 0;
+
+	if (mux->flags & CLK_MUX_INDEX_BIT)
+		index = (1 << ffs(index));
+
+	if (mux->flags & CLK_MUX_INDEX_ONE)
+		index++;
+
+	if (mux->lock)
+		spin_lock_irqsave(mux->lock, flags);
+
+	val = readl(mux->reg);
+	val &= ~(((1 << mux->width) - 1) << mux->shift);
+	val |= index << mux->shift;
+	writel(val, mux->reg);
+
+	if (mux->lock)
+		spin_unlock_irqrestore(mux->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_mux_set_parent);
+
+struct clk_ops clk_mux_ops = {
+	.get_parent = clk_mux_get_parent,
+	.set_parent = clk_mux_set_parent,
+};
+EXPORT_SYMBOL_GPL(clk_mux_ops);
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+		char **parent_names, u8 num_parents, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_mux_flags, spinlock_t *lock)
+{
+	struct clk_mux *mux;
+
+	mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL);
+
+	if (!mux) {
+		pr_err("%s: could not allocate mux clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_mux assignments */
+	mux->reg = reg;
+	mux->shift = shift;
+	mux->width = width;
+	mux->flags = clk_mux_flags;
+	mux->lock = lock;
+
+	return clk_register(dev, name, &clk_mux_ops, &mux->hw,
+			parent_names, num_parents, flags);
+}
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index e2cce6f..5e4312b 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -46,6 +46,130 @@ struct clk {
 #endif
 };
 
+/*
+ * DOC: Basic clock implementations common to many platforms
+ *
+ * Each basic clock hardware type is comprised of a structure describing the
+ * clock hardware, implementations of the relevant callbacks in struct clk_ops,
+ * unique flags for that hardware type, a registration function and an
+ * alternative macro for static initialization
+ */
+
+extern struct clk_ops clk_fixed_rate_ops;
+
+#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
+				_fixed_rate_flags)		\
+	static struct clk _name;				\
+	static char *_name##_parent_names[] = {};		\
+	static struct clk_fixed_rate _name##_hw = {		\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.fixed_rate = _rate,				\
+		.flags = _fixed_rate_flags,			\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_fixed_rate_ops,			\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _name##_parent_names,		\
+		.num_parents =					\
+			ARRAY_SIZE(_name##_parent_names),	\
+		.flags = _flags,				\
+	};
+
+extern struct clk_ops clk_gate_ops;
+
+#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _bit_idx,		\
+				_gate_flags, _lock)		\
+	static struct clk _name;				\
+	static char *_name##_parent_names[] = {			\
+		_parent_name,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		_parent_ptr,					\
+	};							\
+	static struct clk_gate _name##_hw = {			\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.reg = _reg,					\
+		.bit_idx = _bit_idx,				\
+		.flags = _gate_flags,				\
+		.lock = _lock,					\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_gate_ops,				\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _name##_parent_names,		\
+		.num_parents =					\
+			ARRAY_SIZE(_name##_parent_names),	\
+		.parents = _name##_parents,			\
+		.flags = _flags,				\
+	};
+
+extern struct clk_ops clk_divider_ops;
+
+#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, _lock)		\
+	static struct clk _name;				\
+	static char *_name##_parent_names[] = {			\
+		_parent_name,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		_parent_ptr,					\
+	};							\
+	static struct clk_divider _name##_hw = {		\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.reg = _reg,					\
+		.shift = _shift,				\
+		.width = _width,				\
+		.flags = _divider_flags,			\
+		.lock = _lock,					\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_divider_ops,			\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _name##_parent_names,		\
+		.num_parents =					\
+			ARRAY_SIZE(_name##_parent_names),	\
+		.parents = _name##_parents,			\
+		.flags = _flags,				\
+	};
+
+extern struct clk_ops clk_mux_ops;
+
+#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
+				_reg, _shift, _width,		\
+				_mux_flags, _lock)		\
+	static struct clk _name;				\
+	static struct clk_mux _name##_hw = {			\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.reg = _reg,					\
+		.shift = _shift,				\
+		.width = _width,				\
+		.flags = _mux_flags,				\
+		.lock = _lock,					\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_mux_ops,				\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _parent_names,			\
+		.num_parents =					\
+			ARRAY_SIZE(_parent_names),		\
+		.parents = _parents,				\
+		.flags = _flags,				\
+	};
+
 /**
  * __clk_init - initialize the data structures in a struct clk
  * @dev:	device initializing this clk, placeholder for now
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index b18b0e7..5508897 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -129,6 +129,133 @@ struct clk_ops {
 	void		(*init)(struct clk_hw *hw);
 };
 
+/*
+ * DOC: Basic clock implementations common to many platforms
+ *
+ * Each basic clock hardware type is comprised of a structure describing the
+ * clock hardware, implementations of the relevant callbacks in struct clk_ops,
+ * unique flags for that hardware type, a registration function and an
+ * alternative macro for static initialization
+ */
+
+/**
+ * struct clk_fixed_rate - fixed-rate clock
+ * @hw:		handle between common and hardware-specific interfaces
+ * @fixed_rate:	constant frequency of clock
+ */
+struct clk_fixed_rate {
+	struct		clk_hw hw;
+	unsigned long	fixed_rate;
+	u8		flags;
+};
+
+struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned long fixed_rate);
+
+/**
+ * struct clk_gate - gating clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register controlling gate
+ * @bit_idx:	single bit controlling gate
+ * @flags:	hardware-specific flags
+ * @lock:	register lock
+ *
+ * Clock which can gate its output.  Implements .enable & .disable
+ *
+ * Flags:
+ * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
+ * 	enable the clock.  Setting this flag does the opposite: setting the bit
+ * 	disable the clock and clearing it enables the clock
+ */
+struct clk_gate {
+	struct clk_hw hw;
+	void __iomem	*reg;
+	u8		bit_idx;
+	u8		flags;
+	spinlock_t	*lock;
+	char		*parent[1];
+};
+
+#define CLK_GATE_SET_TO_DISABLE		BIT(0)
+
+struct clk *clk_register_gate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock);
+
+/**
+ * struct clk_divider - adjustable divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register containing the divider
+ * @shift:	shift to the divider bit field
+ * @width:	width of the divider bit field
+ * @lock:	register lock
+ *
+ * Clock with an adjustable divider affecting its output frequency.  Implements
+ * .recalc_rate, .set_rate and .round_rate
+ *
+ * Flags:
+ * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
+ * 	register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
+ * 	the raw value read from the register, with the value of zero considered
+ * 	invalid
+ * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
+ * 	the hardware register
+ */
+struct clk_divider {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		shift;
+	u8		width;
+	u8		flags;
+	spinlock_t	*lock;
+	char		*parent[1];
+};
+
+#define CLK_DIVIDER_ONE_BASED		BIT(0)
+#define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
+
+struct clk *clk_register_divider(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, spinlock_t *lock);
+
+/**
+ * struct clk_mux - multiplexer clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register controlling multiplexer
+ * @shift:	shift to multiplexer bit field
+ * @width:	width of mutliplexer bit field
+ * @num_clks:	number of parent clocks
+ * @lock:	register lock
+ *
+ * Clock with multiple selectable parents.  Implements .get_parent, .set_parent
+ * and .recalc_rate
+ *
+ * Flags:
+ * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
+ * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
+ */
+struct clk_mux {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		shift;
+	u8		width;
+	u8		flags;
+	spinlock_t	*lock;
+};
+
+#define CLK_MUX_INDEX_ONE		BIT(0)
+#define CLK_MUX_INDEX_BIT		BIT(1)
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+		char **parent_names, u8 num_parents, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_mux_flags, spinlock_t *lock);
 
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/