Re: [PATCH v7 2/3] clk: introduce the common clock framework
From: Rajendra Nayak
Date: Mon Mar 19 2012 - 07:22:23 EST
Hi Mike,
On Friday 16 March 2012 11:41 AM, Mike Turquette wrote:
The common clock framework defines a common struct clk useful across
most platforms as well as an implementation of the clk api that drivers
can use safely for managing clocks.
The net result is consolidation of many different struct clk definitions
and platform-specific clock framework implementations.
This patch introduces the common struct clk, struct clk_ops and an
implementation of the well-known clock api in include/clk/clk.h.
Platforms may define their own hardware-specific clock structure and
their own clock operation callbacks, so long as it wraps an instance of
struct clk_hw.
See Documentation/clk.txt for more details.
+/*
+ * calculate the new rates returning the topmost clock that has to be
+ * changed.
+ */
+static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
+{
+ struct clk *top = clk;
+ unsigned long best_parent_rate = clk->parent->rate;
Shouldn't you check for a valid parent before dereferencing it? A
clk_set_rate() on a root clock might throw up some issues otherwise.
+ unsigned long new_rate;
+
+ if (!clk->ops->round_rate&& !(clk->flags& CLK_SET_RATE_PARENT)) {
+ clk->new_rate = clk->rate;
+ return NULL;
So does this mean a clk_set_rate() fails for a clk which does not have
a valid .round_rate and does not have a CLK_SET_RATE_PARENT flag set?
I was thinking this could do a..
clk->new_rate = rate;
top = clk;
goto out;
..instead.
regards,
Rajendra
+ }
+
+ if (!clk->ops->round_rate&& (clk->flags& CLK_SET_RATE_PARENT)) {
+ top = clk_calc_new_rates(clk->parent, rate);
+ new_rate = clk->new_rate = clk->parent->new_rate;
+
+ goto out;
+ }
+
+ if (clk->flags& CLK_SET_RATE_PARENT)
+ new_rate = clk->ops->round_rate(clk->hw, rate,&best_parent_rate);
+ else
+ new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
+
+ if (best_parent_rate != clk->parent->rate) {
+ top = clk_calc_new_rates(clk->parent, best_parent_rate);
+
+ goto out;
+ }
+
+out:
+ clk_calc_subtree(clk, new_rate);
+
+ return top;
+}
+
+/*
+ * Notify about rate changes in a subtree. Always walk down the whole tree
+ * so that in case of an error we can walk down the whole tree again and
+ * abort the change.
+ */
+static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event)
+{
+ struct hlist_node *tmp;
+ struct clk *child, *fail_clk = NULL;
+ int ret = NOTIFY_DONE;
+
+ if (clk->rate == clk->new_rate)
+ return 0;
+
+ if (clk->notifier_count) {
+ ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
+ if (ret == NOTIFY_BAD)
+ fail_clk = clk;
+ }
+
+ hlist_for_each_entry(child, tmp,&clk->children, child_node) {
+ clk = clk_propagate_rate_change(child, event);
+ if (clk)
+ fail_clk = clk;
+ }
+
+ return fail_clk;
+}
+
+/*
+ * walk down a subtree and set the new rates notifying the rate
+ * change on the way
+ */
+static void clk_change_rate(struct clk *clk)
+{
+ struct clk *child;
+ unsigned long old_rate;
+ struct hlist_node *tmp;
+
+ old_rate = clk->rate;
+
+ if (clk->ops->set_rate)
+ clk->ops->set_rate(clk->hw, clk->new_rate);
+
+ if (clk->ops->recalc_rate)
+ clk->rate = clk->ops->recalc_rate(clk->hw,
+ clk->parent->rate);
+ else
+ clk->rate = clk->parent->rate;
+
+ if (clk->notifier_count&& old_rate != clk->rate)
+ __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
+
+ hlist_for_each_entry(child, tmp,&clk->children, child_node)
+ clk_change_rate(child);
+}
+
+/**
+ * clk_set_rate - specify a new rate for clk
+ * @clk: the clk whose rate is being changed
+ * @rate: the new rate for clk
+ *
+ * In the simplest case clk_set_rate will only change the rate of clk.
+ *
+ * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call
+ * will fail; only when the clk is disabled will it be able to change
+ * its rate.
+ *
+ * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to
+ * recursively propagate up to clk's parent; whether or not this happens
+ * depends on the outcome of clk's .round_rate implementation. If
+ * *parent_rate is 0 after calling .round_rate then upstream parent
+ * propagation is ignored. If *parent_rate comes back with a new rate
+ * for clk's parent then we propagate up to clk's parent and set it's
+ * rate. Upward propagation will continue until either a clk does not
+ * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting
+ * changes to clk's parent_rate. If there is a failure during upstream
+ * propagation then clk_set_rate will unwind and restore each clk's rate
+ * that had been successfully changed. Afterwards a rate change abort
+ * notification will be propagated downstream, starting from the clk
+ * that failed.
+ *
+ * At the end of all of the rate setting, clk_set_rate internally calls
+ * __clk_recalc_rates and propagates the rate changes downstream,
+ * starting from the highest clk whose rate was changed. This has the
+ * added benefit of propagating post-rate change notifiers.
+ *
+ * Note that while post-rate change and rate change abort notifications
+ * are guaranteed to be sent to a clk only once per call to
+ * clk_set_rate, pre-change notifications will be sent for every clk
+ * whose rate is changed. Stacking pre-change notifications is noisy
+ * for the drivers subscribed to them, but this allows drivers to react
+ * to intermediate clk rate changes up until the point where the final
+ * rate is achieved at the end of upstream propagation.
+ *
+ * Returns 0 on success, -EERROR otherwise.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *top, *fail_clk;
+ int ret = 0;
+
+ /* prevent racing with updates to the clock topology */
+ mutex_lock(&prepare_lock);
+
+ /* bail early if nothing to do */
+ if (rate == clk->rate)
+ goto out;
+
+ /* calculate new rates and get the topmost changed clock */
+ top = clk_calc_new_rates(clk, rate);
+ if (!top) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* notify that we are about to change rates */
+ fail_clk = clk_propagate_rate_change(top, PRE_RATE_CHANGE);
+ if (fail_clk) {
+ pr_warn("%s: failed to set %s rate\n", __func__,
+ fail_clk->name);
+ clk_propagate_rate_change(top, ABORT_RATE_CHANGE);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* change the rates */
+ clk_change_rate(top);
+
+ mutex_unlock(&prepare_lock);
+
+ return 0;
+out:
+ mutex_unlock(&prepare_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+/**
+ * clk_get_parent - return the parent of a clk
+ * @clk: the clk whose parent gets returned
+ *
+ * Simply returns clk->parent. Returns NULL if clk is NULL.
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+ struct clk *parent;
+
+ mutex_lock(&prepare_lock);
+ parent = __clk_get_parent(clk);
+ mutex_unlock(&prepare_lock);
+
+ return parent;
+}
+EXPORT_SYMBOL_GPL(clk_get_parent);
+
+/*
+ * .get_parent is mandatory for clocks with multiple possible parents. It is
+ * optional for single-parent clocks. Always call .get_parent if it is
+ * available and WARN if it is missing for multi-parent clocks.
+ *
+ * For single-parent clocks without .get_parent, first check to see if the
+ * .parents array exists, and if so use it to avoid an expensive tree
+ * traversal. If .parents does not exist then walk the tree with __clk_lookup.
+ */
+static struct clk *__clk_init_parent(struct clk *clk)
+{
+ struct clk *ret = NULL;
+ u8 index;
+
+ /* handle the trivial cases */
+
+ if (!clk->num_parents)
+ goto out;
+
+ if (clk->num_parents == 1) {
+ if (IS_ERR_OR_NULL(clk->parent))
+ ret = clk->parent = __clk_lookup(clk->parent_names[0]);
+ ret = clk->parent;
+ goto out;
+ }
+
+ if (!clk->ops->get_parent) {
+ WARN(!clk->ops->get_parent,
+ "%s: multi-parent clocks must implement .get_parent\n",
+ __func__);
+ goto out;
+ };
+
+ /*
+ * Do our best to cache parent clocks in clk->parents. This prevents
+ * unnecessary and expensive calls to __clk_lookup. We don't set
+ * clk->parent here; that is done by the calling function
+ */
+
+ index = clk->ops->get_parent(clk->hw);
+
+ if (!clk->parents)
+ clk->parents =
+ kmalloc((sizeof(struct clk*) * clk->num_parents),
+ GFP_KERNEL);
+
+ if (!clk->parents)
+ ret = __clk_lookup(clk->parent_names[index]);
+ else if (!clk->parents[index])
+ ret = clk->parents[index] =
+ __clk_lookup(clk->parent_names[index]);
+ else
+ ret = clk->parents[index];
+
+out:
+ return ret;
+}
+
+void __clk_reparent(struct clk *clk, struct clk *new_parent)
+{
+#ifdef CONFIG_COMMON_CLK_DEBUG
+ struct dentry *d;
+ struct dentry *new_parent_d;
+#endif
+
+ if (!clk || !new_parent)
+ return;
+
+ hlist_del(&clk->child_node);
+
+ if (new_parent)
+ hlist_add_head(&clk->child_node,&new_parent->children);
+ else
+ hlist_add_head(&clk->child_node,&clk_orphan_list);
+
+#ifdef CONFIG_COMMON_CLK_DEBUG
+ if (!inited)
+ goto out;
+
+ if (new_parent)
+ new_parent_d = new_parent->dentry;
+ else
+ new_parent_d = orphandir;
+
+ d = debugfs_rename(clk->dentry->d_parent, clk->dentry,
+ new_parent_d, clk->name);
+ if (d)
+ clk->dentry = d;
+ else
+ pr_debug("%s: failed to rename debugfs entry for %s\n",
+ __func__, clk->name);
+out:
+#endif
+
+ clk->parent = new_parent;
+
+ __clk_recalc_rates(clk, POST_RATE_CHANGE);
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk *old_parent;
+ unsigned long flags;
+ int ret = -EINVAL;
+ u8 i;
+
+ old_parent = clk->parent;
+
+ /* find index of new parent clock using cached parent ptrs */
+ for (i = 0; i< clk->num_parents; i++)
+ if (clk->parents[i] == parent)
+ break;
+
+ /*
+ * find index of new parent clock using string name comparison
+ * also try to cache the parent to avoid future calls to __clk_lookup
+ */
+ if (i == clk->num_parents)
+ for (i = 0; i< clk->num_parents; i++)
+ if (!strcmp(clk->parent_names[i], parent->name)) {
+ clk->parents[i] = __clk_lookup(parent->name);
+ break;
+ }
+
+ if (i == clk->num_parents) {
+ pr_debug("%s: clock %s is not a possible parent of clock %s\n",
+ __func__, parent->name, clk->name);
+ goto out;
+ }
+
+ /* migrate prepare and enable */
+ if (clk->prepare_count)
+ __clk_prepare(parent);
+
+ /* FIXME replace with clk_is_enabled(clk) someday */
+ spin_lock_irqsave(&enable_lock, flags);
+ if (clk->enable_count)
+ __clk_enable(parent);
+ spin_unlock_irqrestore(&enable_lock, flags);
+
+ /* change clock input source */
+ ret = clk->ops->set_parent(clk->hw, i);
+
+ /* clean up old prepare and enable */
+ spin_lock_irqsave(&enable_lock, flags);
+ if (clk->enable_count)
+ __clk_disable(old_parent);
+ spin_unlock_irqrestore(&enable_lock, flags);
+
+ if (clk->prepare_count)
+ __clk_unprepare(old_parent);
+
+out:
+ return ret;
+}
+
+/**
+ * clk_set_parent - switch the parent of a mux clk
+ * @clk: the mux clk whose input we are switching
+ * @parent: the new input to clk
+ *
+ * Re-parent clk to use parent as it's new input source. If clk has the
+ * CLK_SET_PARENT_GATE flag set then clk must be gated for this
+ * operation to succeed. After successfully changing clk's parent
+ * clk_set_parent will update the clk topology, sysfs topology and
+ * propagate rate recalculation via __clk_recalc_rates. Returns 0 on
+ * success, -EERROR otherwise.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = 0;
+
+ if (!clk || !clk->ops)
+ return -EINVAL;
+
+ if (!clk->ops->set_parent)
+ return -ENOSYS;
+
+ /* prevent racing with updates to the clock topology */
+ mutex_lock(&prepare_lock);
+
+ if (clk->parent == parent)
+ goto out;
+
+ /* propagate PRE_RATE_CHANGE notifications */
+ if (clk->notifier_count)
+ ret = __clk_speculate_rates(clk, parent->rate);
+
+ /* abort if a driver objects */
+ if (ret == NOTIFY_STOP)
+ goto out;
+
+ /* only re-parent if the clock is not in use */
+ if ((clk->flags& CLK_SET_PARENT_GATE)&& clk->prepare_count)
+ ret = -EBUSY;
+ else
+ ret = __clk_set_parent(clk, parent);
+
+ /* propagate ABORT_RATE_CHANGE if .set_parent failed */
+ if (ret) {
+ __clk_recalc_rates(clk, ABORT_RATE_CHANGE);
+ goto out;
+ }
+
+ /* propagate rate recalculation downstream */
+ __clk_reparent(clk, parent);
+
+out:
+ mutex_unlock(&prepare_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+/**
+ * __clk_init - initialize the data structures in a struct clk
+ * @dev: device initializing this clk, placeholder for now
+ * @clk: clk being initialized
+ *
+ * Initializes the lists in struct clk, queries the hardware for the
+ * parent and rate and sets them both.
+ *
+ * Any struct clk passed into __clk_init must have the following members
+ * populated:
+ * .name
+ * .ops
+ * .hw
+ * .parent_names
+ * .num_parents
+ * .flags
+ *
+ * Essentially, everything that would normally be passed into clk_register is
+ * assumed to be initialized already in __clk_init. The other members may be
+ * populated, but are optional.
+ *
+ * __clk_init is only exposed via clk-private.h and is intended for use with
+ * very large numbers of clocks that need to be statically initialized. It is
+ * a layering violation to include clk-private.h from any code which implements
+ * a clock's .ops; as such any statically initialized clock data MUST be in a
+ * separate C file from the logic that implements it's operations.
+ */
+void __clk_init(struct device *dev, struct clk *clk)
+{
+ int i;
+ struct clk *orphan;
+ struct hlist_node *tmp, *tmp2;
+
+ if (!clk)
+ return;
+
+ mutex_lock(&prepare_lock);
+
+ /* check to see if a clock with this name is already registered */
+ if (__clk_lookup(clk->name))
+ goto out;
+
+ /* throw a WARN if any entries in parent_names are NULL */
+ for (i = 0; i< clk->num_parents; i++)
+ WARN(!clk->parent_names[i],
+ "%s: invalid NULL in %s's .parent_names\n",
+ __func__, clk->name);
+
+ /*
+ * Allocate an array of struct clk *'s to avoid unnecessary string
+ * look-ups of clk's possible parents. This can fail for clocks passed
+ * in to clk_init during early boot; thus any access to clk->parents[]
+ * must always check for a NULL pointer and try to populate it if
+ * necessary.
+ *
+ * If clk->parents is not NULL we skip this entire block. This allows
+ * for clock drivers to statically initialize clk->parents.
+ */
+ if (clk->num_parents&& !clk->parents) {
+ clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents),
+ GFP_KERNEL);
+ /*
+ * __clk_lookup returns NULL for parents that have not been
+ * clk_init'd; thus any access to clk->parents[] must check
+ * for a NULL pointer. We can always perform lazy lookups for
+ * missing parents later on.
+ */
+ if (clk->parents)
+ for (i = 0; i< clk->num_parents; i++)
+ clk->parents[i] =
+ __clk_lookup(clk->parent_names[i]);
+ }
+
+ clk->parent = __clk_init_parent(clk);
+
+ /*
+ * Populate clk->parent if parent has already been __clk_init'd. If
+ * parent has not yet been __clk_init'd then place clk in the orphan
+ * list. If clk has set the CLK_IS_ROOT flag then place it in the root
+ * clk list.
+ *
+ * Every time a new clk is clk_init'd then we walk the list of orphan
+ * clocks and re-parent any that are children of the clock currently
+ * being clk_init'd.
+ */
+ if (clk->parent)
+ hlist_add_head(&clk->child_node,
+ &clk->parent->children);
+ else if (clk->flags& CLK_IS_ROOT)
+ hlist_add_head(&clk->child_node,&clk_root_list);
+ else
+ hlist_add_head(&clk->child_node,&clk_orphan_list);
+
+ /*
+ * Set clk's rate. The preferred method is to use .recalc_rate. For
+ * simple clocks and lazy developers the default fallback is to use the
+ * parent's rate. If a clock doesn't have a parent (or is orphaned)
+ * then rate is set to zero.
+ */
+ if (clk->ops->recalc_rate)
+ clk->rate = clk->ops->recalc_rate(clk->hw,
+ __clk_get_rate(clk->parent));
+ else if (clk->parent)
+ clk->rate = clk->parent->rate;
+ else
+ clk->rate = 0;
+
+ /*
+ * walk the list of orphan clocks and reparent any that are children of
+ * this clock
+ */
+ hlist_for_each_entry_safe(orphan, tmp, tmp2,&clk_orphan_list, child_node)
+ for (i = 0; i< orphan->num_parents; i++)
+ if (!strcmp(clk->name, orphan->parent_names[i])) {
+ __clk_reparent(orphan, clk);
+ break;
+ }
+
+ /*
+ * optional platform-specific magic
+ *
+ * The .init callback is not used by any of the basic clock types, but
+ * exists for weird hardware that must perform initialization magic.
+ * Please consider other ways of solving initialization problems before
+ * using this callback, as it's use is discouraged.
+ */
+ if (clk->ops->init)
+ clk->ops->init(clk->hw);
+
+ clk_debug_register(clk);
+
+out:
+ mutex_unlock(&prepare_lock);
+
+ return;
+}
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @hw: link to hardware-specific clock data
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes. It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API.
+ */
+struct clk *clk_register(struct device *dev, const char *name,
+ const struct clk_ops *ops, struct clk_hw *hw,
+ char **parent_names, u8 num_parents, unsigned long flags)
+{
+ struct clk *clk;
+
+ clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return NULL;
+
+ clk->name = name;
+ clk->ops = ops;
+ clk->hw = hw;
+ clk->flags = flags;
+ clk->parent_names = parent_names;
+ clk->num_parents = num_parents;
+ hw->clk = clk;
+
+ __clk_init(dev, clk);
+
+ return clk;
+}
+EXPORT_SYMBOL_GPL(clk_register);
+
+/*** clk rate change notifiers ***/
+
+/**
+ * clk_notifier_register - add a clk rate change notifier
+ * @clk: struct clk * to watch
+ * @nb: struct notifier_block * with callback info
+ *
+ * Request notification when clk's rate changes. This uses an SRCU
+ * notifier because we want it to block and notifier unregistrations are
+ * uncommon. The callbacks associated with the notifier must not
+ * re-enter into the clk framework by calling any top-level clk APIs;
+ * this will cause a nested prepare_lock mutex.
+ *
+ * Pre-change notifier callbacks will be passed the current, pre-change
+ * rate of the clk via struct clk_notifier_data.old_rate. The new,
+ * post-change rate of the clk is passed via struct
+ * clk_notifier_data.new_rate.
+ *
+ * Post-change notifiers will pass the now-current, post-change rate of
+ * the clk in both struct clk_notifier_data.old_rate and struct
+ * clk_notifier_data.new_rate.
+ *
+ * Abort-change notifiers are effectively the opposite of pre-change
+ * notifiers: the original pre-change clk rate is passed in via struct
+ * clk_notifier_data.new_rate and the failed post-change rate is passed
+ * in via struct clk_notifier_data.old_rate.
+ *
+ * clk_notifier_register() must be called from non-atomic context.
+ * Returns -EINVAL if called with null arguments, -ENOMEM upon
+ * allocation failure; otherwise, passes along the return value of
+ * srcu_notifier_chain_register().
+ */
+int clk_notifier_register(struct clk *clk, struct notifier_block *nb)
+{
+ struct clk_notifier *cn;
+ int ret = -ENOMEM;
+
+ if (!clk || !nb)
+ return -EINVAL;
+
+ mutex_lock(&prepare_lock);
+
+ /* search the list of notifiers for this clk */
+ list_for_each_entry(cn,&clk_notifier_list, node)
+ if (cn->clk == clk)
+ break;
+
+ /* if clk wasn't in the notifier list, allocate new clk_notifier */
+ if (cn->clk != clk) {
+ cn = kzalloc(sizeof(struct clk_notifier), GFP_KERNEL);
+ if (!cn)
+ goto out;
+
+ cn->clk = clk;
+ srcu_init_notifier_head(&cn->notifier_head);
+
+ list_add(&cn->node,&clk_notifier_list);
+ }
+
+ ret = srcu_notifier_chain_register(&cn->notifier_head, nb);
+
+ clk->notifier_count++;
+
+out:
+ mutex_unlock(&prepare_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_notifier_register);
+
+/**
+ * clk_notifier_unregister - remove a clk rate change notifier
+ * @clk: struct clk *
+ * @nb: struct notifier_block * with callback info
+ *
+ * Request no further notification for changes to 'clk' and frees memory
+ * allocated in clk_notifier_register.
+ *
+ * Returns -EINVAL if called with null arguments; otherwise, passes
+ * along the return value of srcu_notifier_chain_unregister().
+ */
+int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
+{
+ struct clk_notifier *cn = NULL;
+ int ret = -EINVAL;
+
+ if (!clk || !nb)
+ return -EINVAL;
+
+ mutex_lock(&prepare_lock);
+
+ list_for_each_entry(cn,&clk_notifier_list, node)
+ if (cn->clk == clk)
+ break;
+
+ if (cn->clk == clk) {
+ ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb);
+
+ clk->notifier_count--;
+
+ /* XXX the notifier code should handle this better */
+ if (!cn->notifier_head.head) {
+ srcu_cleanup_notifier_head(&cn->notifier_head);
+ kfree(cn);
+ }
+
+ } else {
+ ret = -ENOENT;
+ }
+
+ mutex_unlock(&prepare_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_notifier_unregister);
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
new file mode 100644
index 0000000..e2cce6f
--- /dev/null
+++ b/include/linux/clk-private.h
@@ -0,0 +1,72 @@
+/*
+ * linux/include/linux/clk-private.h
+ *
+ * Copyright (c) 2010-2011 Jeremy Kerr<jeremy.kerr@xxxxxxxxxxxxx>
+ * Copyright (C) 2011-2012 Linaro Ltd<mturquette@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_CLK_PRIVATE_H
+#define __LINUX_CLK_PRIVATE_H
+
+#include<linux/clk-provider.h>
+#include<linux/list.h>
+
+/*
+ * WARNING: Do not include clk-private.h from any file that implements struct
+ * clk_ops. Doing so is a layering violation!
+ *
+ * This header exists only to allow for statically initialized clock data. Any
+ * static clock data must be defined in a separate file from the logic that
+ * implements the clock operations for that same data.
+ */
+
+#ifdef CONFIG_COMMON_CLK
+
+struct clk {
+ const char *name;
+ const struct clk_ops *ops;
+ struct clk_hw *hw;
+ struct clk *parent;
+ char **parent_names;
+ struct clk **parents;
+ u8 num_parents;
+ unsigned long rate;
+ unsigned long new_rate;
+ unsigned long flags;
+ unsigned int enable_count;
+ unsigned int prepare_count;
+ struct hlist_head children;
+ struct hlist_node child_node;
+ unsigned int notifier_count;
+#ifdef CONFIG_COMMON_CLK_DEBUG
+ struct dentry *dentry;
+#endif
+};
+
+/**
+ * __clk_init - initialize the data structures in a struct clk
+ * @dev: device initializing this clk, placeholder for now
+ * @clk: clk being initialized
+ *
+ * Initializes the lists in struct clk, queries the hardware for the
+ * parent and rate and sets them both.
+ *
+ * Any struct clk passed into __clk_init must have the following members
+ * populated:
+ * .name
+ * .ops
+ * .hw
+ * .parent_names
+ * .num_parents
+ * .flags
+ *
+ * It is not necessary to call clk_register if __clk_init is used directly with
+ * statically initialized clock data.
+ */
+void __clk_init(struct device *dev, struct clk *clk);
+
+#endif /* CONFIG_COMMON_CLK */
+#endif /* CLK_PRIVATE_H */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
new file mode 100644
index 0000000..b18b0e7
--- /dev/null
+++ b/include/linux/clk-provider.h
@@ -0,0 +1,173 @@
+/*
+ * linux/include/linux/clk-provider.h
+ *
+ * Copyright (c) 2010-2011 Jeremy Kerr<jeremy.kerr@xxxxxxxxxxxxx>
+ * Copyright (C) 2011-2012 Linaro Ltd<mturquette@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_CLK_PROVIDER_H
+#define __LINUX_CLK_PROVIDER_H
+
+#include<linux/clk.h>
+
+#ifdef CONFIG_COMMON_CLK
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure. struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ */
+struct clk_hw {
+ struct clk *clk;
+};
+
+/*
+ * flags used across common struct clk. these flags should only affect the
+ * top-level framework. custom flags for dealing with hardware specifics
+ * belong in struct clk_foo
+ */
+#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */
+#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */
+#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
+#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
+#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
+
+/**
+ * struct clk_ops - Callback operations for hardware clocks; these are to
+ * be provided by the clock implementation, and will be called by drivers
+ * through the clk_* api.
+ *
+ * @prepare: Prepare the clock for enabling. This must not return until
+ * the clock is fully prepared, and it's safe to call clk_enable.
+ * This callback is intended to allow clock implementations to
+ * do any initialisation that may sleep. Called with
+ * prepare_lock held.
+ *
+ * @unprepare: Release the clock from its prepared state. This will typically
+ * undo any work done in the @prepare callback. Called with
+ * prepare_lock held.
+ *
+ * @enable: Enable the clock atomically. This must not return until the
+ * clock is generating a valid clock signal, usable by consumer
+ * devices. Called with enable_lock held. This function must not
+ * sleep.
+ *
+ * @disable: Disable the clock atomically. Called with enable_lock held.
+ * This function must not sleep.
+ *
+ * @recalc_rate Recalculate the rate of this clock, by quering hardware. The
+ * parent rate is an input parameter. It is up to the caller to
+ * insure that the prepare_mutex is held across this call.
+ * Returns the calculated rate. Optional, but recommended - if
+ * this op is not set then clock rate will be initialized to 0.
+ *
+ * @round_rate: Given a target rate as input, returns the closest rate actually
+ * supported by the clock.
+ *
+ * @get_parent: Queries the hardware to determine the parent of a clock. The
+ * return value is a u8 which specifies the index corresponding to
+ * the parent clock. This index can be applied to either the
+ * .parent_names or .parents arrays. In short, this function
+ * translates the parent value read from hardware into an array
+ * index. Currently only called when the clock is initialized by
+ * __clk_init. This callback is mandatory for clocks with
+ * multiple parents. It is optional (and unnecessary) for clocks
+ * with 0 or 1 parents.
+ *
+ * @set_parent: Change the input source of this clock; for clocks with multiple
+ * possible parents specify a new parent by passing in the index
+ * as a u8 corresponding to the parent in either the .parent_names
+ * or .parents arrays. This function in affect translates an
+ * array index into the value programmed into the hardware.
+ * Returns 0 on success, -EERROR otherwise.
+ *
+ * @set_rate: Change the rate of this clock. If this callback returns
+ * CLK_SET_RATE_PARENT, the rate change will be propagated to the
+ * parent clock (which may propagate again if the parent clock
+ * also sets this flag). The requested rate of the parent is
+ * passed back from the callback in the second 'unsigned long *'
+ * argument. Note that it is up to the hardware clock's set_rate
+ * implementation to insure that clocks do not run out of spec
+ * when propgating the call to set_rate up to the parent. One way
+ * to do this is to gate the clock (via clk_disable and/or
+ * clk_unprepare) before calling clk_set_rate, then ungating it
+ * afterward. If your clock also has the CLK_GATE_SET_RATE flag
+ * set then this will insure safety. Returns 0 on success,
+ * -EERROR otherwise.
+ *
+ * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
+ * implementations to split any work between atomic (enable) and sleepable
+ * (prepare) contexts. If enabling a clock requires code that might sleep,
+ * this must be done in clk_prepare. Clock enable code that will never be
+ * called in a sleepable context may be implement in clk_enable.
+ *
+ * Typically, drivers will call clk_prepare when a clock may be needed later
+ * (eg. when a device is opened), and clk_enable when the clock is actually
+ * required (eg. from an interrupt). Note that clk_prepare MUST have been
+ * called before clk_enable.
+ */
+struct clk_ops {
+ int (*prepare)(struct clk_hw *hw);
+ void (*unprepare)(struct clk_hw *hw);
+ int (*enable)(struct clk_hw *hw);
+ void (*disable)(struct clk_hw *hw);
+ int (*is_enabled)(struct clk_hw *hw);
+ unsigned long (*recalc_rate)(struct clk_hw *hw,
+ unsigned long parent_rate);
+ long (*round_rate)(struct clk_hw *hw, unsigned long,
+ unsigned long *);
+ int (*set_parent)(struct clk_hw *hw, u8 index);
+ u8 (*get_parent)(struct clk_hw *hw);
+ int (*set_rate)(struct clk_hw *hw, unsigned long);
+ void (*init)(struct clk_hw *hw);
+};
+
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @hw: link to hardware-specific clock data
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes. It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API.
+ */
+struct clk *clk_register(struct device *dev, const char *name,
+ const struct clk_ops *ops, struct clk_hw *hw,
+ char **parent_names, u8 num_parents, unsigned long flags);
+
+/* helper functions */
+const char *__clk_get_name(struct clk *clk);
+struct clk_hw *__clk_get_hw(struct clk *clk);
+u8 __clk_get_num_parents(struct clk *clk);
+struct clk *__clk_get_parent(struct clk *clk);
+inline int __clk_get_enable_count(struct clk *clk);
+inline int __clk_get_prepare_count(struct clk *clk);
+unsigned long __clk_get_rate(struct clk *clk);
+unsigned long __clk_get_flags(struct clk *clk);
+int __clk_is_enabled(struct clk *clk);
+struct clk *__clk_lookup(const char *name);
+
+/*
+ * FIXME clock api without lock protection
+ */
+int __clk_prepare(struct clk *clk);
+void __clk_unprepare(struct clk *clk);
+void __clk_reparent(struct clk *clk, struct clk *new_parent);
+unsigned long __clk_round_rate(struct clk *clk, unsigned long rate);
+
+#endif /* CONFIG_COMMON_CLK */
+#endif /* CLK_PROVIDER_H */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index b9d46fa..b025272 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -3,6 +3,7 @@
*
* Copyright (C) 2004 ARM Limited.
* Written by Deep Blue Solutions Limited.
+ * Copyright (C) 2011-2012 Linaro Ltd<mturquette@xxxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,18 +13,75 @@
#define __LINUX_CLK_H
#include<linux/kernel.h>
+#include<linux/notifier.h>
struct device;
-/*
- * The base API.
+struct clk;
+
+#ifdef CONFIG_COMMON_CLK
+
+/**
+ * DOC: clk notifier callback types
+ *
+ * PRE_RATE_CHANGE - called immediately before the clk rate is changed,
+ * to indicate that the rate change will proceed. Drivers must
+ * immediately terminate any operations that will be affected by the
+ * rate change. Callbacks may either return NOTIFY_DONE or
+ * NOTIFY_STOP.
+ *
+ * ABORT_RATE_CHANGE: called if the rate change failed for some reason
+ * after PRE_RATE_CHANGE. In this case, all registered notifiers on
+ * the clk will be called with ABORT_RATE_CHANGE. Callbacks must
+ * always return NOTIFY_DONE.
+ *
+ * POST_RATE_CHANGE - called after the clk rate change has successfully
+ * completed. Callbacks must always return NOTIFY_DONE.
+ *
*/
+#define PRE_RATE_CHANGE BIT(0)
+#define POST_RATE_CHANGE BIT(1)
+#define ABORT_RATE_CHANGE BIT(2)
+/**
+ * struct clk_notifier - associate a clk with a notifier
+ * @clk: struct clk * to associate the notifier with
+ * @notifier_head: a blocking_notifier_head for this clk
+ * @node: linked list pointers
+ *
+ * A list of struct clk_notifier is maintained by the notifier code.
+ * An entry is created whenever code registers the first notifier on a
+ * particular @clk. Future notifiers on that @clk are added to the
+ * @notifier_head.
+ */
+struct clk_notifier {
+ struct clk *clk;
+ struct srcu_notifier_head notifier_head;
+ struct list_head node;
+};
-/*
- * struct clk - an machine class defined object / cookie.
+/**
+ * struct clk_notifier_data - rate data to pass to the notifier callback
+ * @clk: struct clk * being changed
+ * @old_rate: previous rate of this clk
+ * @new_rate: new rate of this clk
+ *
+ * For a pre-notifier, old_rate is the clk's rate before this rate
+ * change, and new_rate is what the rate will be in the future. For a
+ * post-notifier, old_rate and new_rate are both set to the clk's
+ * current rate (this was done to optimize the implementation).
*/
-struct clk;
+struct clk_notifier_data {
+ struct clk *clk;
+ unsigned long old_rate;
+ unsigned long new_rate;
+};
+
+int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
+
+int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
+
+#endif /* !CONFIG_COMMON_CLK */
/**
* clk_get - lookup and obtain a reference to a clock producer.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/