[PATCH RFT 1/2] regulator: max1586: Convert max1586_v3_ops toregulator_list_voltage_linear

From: Axel Lin
Date: Thu Jun 07 2012 - 20:26:42 EST


Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
---
drivers/regulator/max1586.c | 32 +++++++++++---------------------
1 file changed, 11 insertions(+), 21 deletions(-)

diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index 126c7d8..a54771e 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -63,14 +63,6 @@ static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
* R24 and R25=100kOhm as described in the data sheet.
* The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
*/
-static int max1586_v3_calc_voltage(struct max1586_data *max1586,
- unsigned selector)
-{
- unsigned range_uV = max1586->max_uV - max1586->min_uV;
-
- return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
-}
-
static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,
unsigned *selector)
{
@@ -86,25 +78,16 @@ static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,

*selector = DIV_ROUND_UP((min_uV - max1586->min_uV) *
MAX1586_V3_MAX_VSEL, range_uV);
- if (max1586_v3_calc_voltage(max1586, *selector) > max_uV)
+ if (regulator_list_voltage_linear(rdev, *selector) > max_uV)
return -EINVAL;

dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
- max1586_v3_calc_voltage(max1586, *selector) / 1000);
+ regulator_list_voltage_linear(rdev, *selector) / 1000);

v3_prog = I2C_V3_SELECT | (u8) *selector;
return i2c_smbus_write_byte(client, v3_prog);
}

-static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
-{
- struct max1586_data *max1586 = rdev_get_drvdata(rdev);
-
- if (selector > MAX1586_V3_MAX_VSEL)
- return -EINVAL;
- return max1586_v3_calc_voltage(max1586, selector);
-}
-
static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
@@ -124,7 +107,7 @@ static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
*/
static struct regulator_ops max1586_v3_ops = {
.set_voltage = max1586_v3_set,
- .list_voltage = max1586_v3_list,
+ .list_voltage = regulator_list_voltage_linear,
};

static struct regulator_ops max1586_v6_ops = {
@@ -132,7 +115,7 @@ static struct regulator_ops max1586_v6_ops = {
.list_voltage = regulator_list_voltage_table,
};

-static const struct regulator_desc max1586_reg[] = {
+static struct regulator_desc max1586_reg[] = {
{
.name = "Output_V3",
.id = MAX1586_V3,
@@ -185,6 +168,13 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
goto err;
}

+ if (id == MAX1586_V3) {
+ max1586_reg[id].min_uV = max1586->min_uV;
+ max1586_reg[id].uV_step =
+ (max1586->max_uV - max1586->min_uV) /
+ MAX1586_V3_MAX_VSEL;
+ }
+
config.dev = &client->dev;
config.init_data = pdata->subdevs[i].platform_data;
config.driver_data = max1586;
--
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/