[GIT PULL] regulator updates for v3.10

From: Mark Brown
Date: Mon Apr 29 2013 - 16:09:16 EST

The following changes since commit 60d509fa6a9c4653a86ad830e4c4b30360b23f0e:

Linux 3.9-rc8 (2013-04-21 14:38:45 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v3.10

for you to fetch changes up to bee546581424b5514ec6a034fb83fd4e95b804da:

Merge remote-tracking branch 'regulator/topic/wm8994' into v3.9-rc8 (2013-04-28 02:13:50 +0100)

----------------------------------------------------------------

regulator: Updates for v3.10

The diffstat and changelog here is dominated by Lee Jones' heroic
efforts to sync the ab8500 driver that's been maintained out of tree
with mainline (plus Axel's cleanup work on the results) but there's a
few other things here:

- Axel Lin added regulator_map_voltage_ascend() optimising a common
pattern for drivers using the core code.
- Milo Kim tought the regulator core to handle regulators sharing an
enable GPIO, avoiding the need to do hacks to support such systems.
- Andrew Bresticker added code to handle missing supplies for regulators
more sensibly for device tree systems, reducing the need for stubbing
there.

plus the usual batch of driver specific updates and fixes.

----------------------------------------------------------------
Alexander Shiyan (2):
regulator: mc13xxx: Add warning of incorrect names of regulators
regulator: mc13783: Add device tree probe support

Alexandru Gheorghiu (1):
regulator: fan53555: Use PTR_RET function

Andrew Bresticker (1):
regulator: core: don't require a supply when supply_name is specified

Axel Lin (70):
regulator: twl: Convert twl[6030|4030]fixed_ops to regulator_list_voltage_linear
regulator: twl: Remove VDD1_VSEL_table and VDD2_VSEL_table
regulator: twl: Remove TWL6030_FIXED_RESOURCE
regulator: max8925: Remove unused parameter from max8925_regulator_dt_init
regulator: tps6586x: Use dev_err rather than dev_warn for error message
regulator: core: Add enable_is_inverted flag to indicate set enable_mask bits to disable
regulator: 88pm8607: Use enable_is_inverted flag with regulator_enable_regmap and friends APIs
regulator: max8649: Use enable_is_inverted flag with regulator_enable_regmap and friends APIs
regulator: palmas: Use of_property_read_bool to read "ti,warm-reset" DT property
regulator: ab8500: Fix build error
regulator: ab8500: Use regulator_list_voltage_linear for fixed voltage
regulator: maintainers: Update email address for Liam
regulator: ab8500: Don't update is_enabled flag in error paths
regulator: ab8500: Add missing enable_time settings
regulator: ab8500: Remove set_voltage_time_sel and delay setting
regulator: ab8500: Update info->update_val only when successfully update register
regulator: max1586: Constify v6_voltages_uv table
regulator: dbx500-prcmu: Remove operating_point from struct dbx500_regulator_info
regulator: ab8500-ext: Don't update info->is_enabled if write to register fails
regulator: ab8500: Fix list_voltage for fixed voltage regulators
regulator: ab8500: Add missing volt_table setting for AB8540_LDO_TVOUT
regulator: lp8788: Remove lp8788_dldo_id and lp8788_aldo_id arrays
regulator: lp8788: Implement list_voltage for lp8788_ldo_voltage_fixed_ops
regulator: ab8500: Remove ab8500_regulator_set_voltage_time_sel
regulator: ab8500: Get rid of is_enabled from struct ab8500_regulator_info
regulator: ab8500-ext: Get rid of is_enabled from struct ab8500_ext_regulator_info
regulator: ab8500-ext: Remove unnecessary checking for ab9540 and ab8540
regulator: ab8500-ext: Remove get_voltage to avoid duplicate implementation
regulator: ab8500-ext: Make the return type of ab8500_ext_regulator_exit() void
regulator: ab8500: Unregister ab8500-ext regulators in probe() failure path
regulator: ab8500: Fix voltage_mask for AB8505_LDO_AUDIO
regulator: ab8500: Fix voltage_shift setting for AB8540_LDO_DMIC
regulator: max8997: Test pdata by NULL checking instead of IS_ERR_OR_NULL
regulator: rc5t583: Remove unused fields from struct rc5t583_regulator_info
regulator: ab8500: Optimize ab8540_aux3_regulator_get_voltage_sel
regulator: as3711: Use a static of_regulator_match table for of_regulator_match
regulator: ab8500: Don't update info->update_val if write to register fails
regulator: ab8500: Don't update lp_mode_req flag in set_mode() error paths
regulator: ab8500-ext: Don't update info->update_val if set_mode() fails
regulator: ab8500-ext: Remove enable() and disable() functions
regulator: ab8500: Fix set voltage for AB8540_LDO_AUX3
regulator: core: Add regulator_map_voltage_ascend() API
regulator: ab8500: Remove unused voltage_shift field from struct expand_register
regulator: ab8500: Get rid of voltage_shift field from struct ab8500_regulator_info
regulator: palmas: Fix min_uV for LDO8 tracking mode
regulator: palmas: Don't update tstep register for SMPS3 and SMPS7
regulator: palmas: Add missing ctrl_addr setting for SMPS10
regulator: palmas: Fix off-by-one for ramp_delay and register value mapping
regulator: tps62360: Fix off-by-one shift for ramp_ctrl
regulator: tps65023: Use [set|get]_voltage_sel_regmap instead of open coded
regulator: lp3971: Convert to use regulator_map_voltage_ascend
regulator: lp3972: Convert to use regulator_map_voltage_ascend
regulator: tps65910: Convert to use regulator_map_voltage_ascend
regulator: tps6586x: Convert to use regulator_map_voltage_ascend
regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0
regulator: tps80031: Convert tps80031_dcdc_ops to [get|set]_voltage_sel_regmap
regulator: max8973: Don't override control1 variable when set ramp delay bits
regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel
regulator: tps6507x: Use regulator_map_voltage_ascend
regulator: tps65023: Merge tps65020 ldo1 and ldo2 vsel table
regulator: tps65023: Use regulator_map_voltage_ascend
regulator: mc13892: Use regulator_map_voltage_ascend for mc13892_sw_regulator_ops
regulator: lp872x: Use regulator_map_voltage_ascend
regulator: lp8788-buck: Use regulator_map_voltage_ascend
regulator: tps6524x: Use regulator_map_voltage_ascend
regulator: ab3100: Fix regulator register error handling
regulator: max8952: Add missing config.of_node setting for regulator register
regulator: max77686: Don't update max77686->opmode if update register fails
regulator: Remove NULL test before calling regulator_unregister()
regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel

Bengt Jonsson (4):
regulator: ab8500: Added get_optimum_mode on regulators with idle mode
regulator: ab8500: Separate regulator and MFD platform data
regulator: ab8500-ext: Add HW request support
regulator: ab8500-ext: Add support for AB8505/AB9540

Emeric Vigier (1):
regulator: ab8500: Add set_mode/get_mode support

Graeme Gregory (1):
regulator: palmas correct dt parsing

Guennadi Liakhovetski (2):
regulator: tps6586x: (cosmetic) simplify a conditional
regulator: as3711: add OF support

Ian Lartey (1):
regulator: palmas remove palmas-charger option from DT bindings

J Keerthy (1):
regulator: palmas: Change the DT node property names to follow the convention

Julia Lawall (1):
regulator: s5m8767: adjust duplicate test

Kim, Milo (4):
regulator: core: support shared enable GPIO concept
regulator: core: manage enable GPIO list
regulator: core: use regulator_ena_pin member
regulator: lp8788-ldo: use ena_pin of regulator-core for external control

Laxman Dewangan (7):
regulator: palmas: rename probe/remove callback functions
regulator: palmas: add input supply names
regulator: palmas: clear sleep bits if not selected
regulator: palmas: support for external regulator through control outputs
regulator: palmas: add support for LDO8 tracking mode
regulator: palma: add ramp delay support through regulator constraints
regulator: palmas: preserve modes of rails during enable/disable

Lee Jones (42):
regulator: ab8500: Further populate initialisation registers
ARM: ux500: regulators: Add mask for configuration
regulator: ab8500: Another push to synchronise recent AB8500 developments
ARM: ux500: Update displays in vaux1 consumer list
ARM: ux500: Add supply for the L3G4200D Gyroscope
ARM: ux500: Add supply for the Ambient light sensor device
ARM: ux500: Add supply for the Pressure sensor
ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen
ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1
regulator: ab8500: Clean out SoC registers
ARM: ux500: regulator: Add accelerometer and fix magnetometer supply device ID
regulator: ab8500: Amend the update value for AB8500_LDO_INTCORE regulator
regulator: ab8500-ext: New driver to control external regulators
ARM: ux500: Add regulator platform data for AB8500 external regulators
ARM: ux500: Provide a mechanism to over-ride regulator init values
ARM: ux500: Turn off external regulator #1 when early HREFs suspend
ARM: ux500: Setup external regulator supply #2 for HREF v20 boards
regulator: ab8500: Remove USB regulator
regulator: ab8500: Init debug from regulator driver
regulator: ab8500: Prepare the driver for additional platforms
regulator: ab8500: Add support for the ab9540
regulator: ab8500: Correct TVOUT regulator enable time
regulator: ab8500: add support for ab8505
regulator: ab8500: Add support for the ab8540
regulator: ab8500: Update voltage handling for fixed voltage regulators
regulator: ab8500: Use regulator_list_voltage_table()
ARM: ux500: Use de-globalised version of id.h
regulator: ab8500-ext: Remove unused REGULATOR_AB8500_EXT guard
regulator: ab8500-ext: Add support for AB9540 regulators
regulator: ab8500: Supply platform specific regulator id values
regulator: ab8500: Add voltage selection for AUDIO and ANA on AB8505
regulator: ab8500: Also check for AB8505 based platforms
regulator: ab8500: Add new operations for Vaux3
regulator: ab8500: Add mode operation for v-amic
regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540
regulator: ab8500: Use a struct to select the good regulator configuration
regulator: ab8500: Set enable enable_time in regulator_desc
regulator: ab8500: Remove the need for a 'delay' property
regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages
ARM: ux500: Pass regulator platform data using the new format
regulator: ab8500: Shuffle init functions into a more logical order
ARM: ux500: Regulators: Bring the AB8500 regulator platform data up-to-date

Linus Walleij (2):
regulator: ab3100: refactor probe to use IDs
regulator: ab3100: device tree support

Mark Brown (34):
regulator: core: Mark all get and enable calls as __must_check
Merge remote-tracking branch 'regulator/fix/doc' into regulator-enable-invert
regulator: arizona: Increase ramp delay for high current regulators
regulator: wm8994: Convert to module_platform_driver()
regulator: wm8994: Provide default init data
Merge tag 'v3.9-rc7' into regulator-fix-core
Merge remote-tracking branch 'regulator/fix/core' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/ab3100' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/ab8500' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/arizona' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/as3711' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/ascend' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/core' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/enable-invert' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/fan53555' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/gpio' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/lp8788' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max1586' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max77686' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max8925' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max8952' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max8973' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max8997' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/max8998' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/mc13892' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/palmas' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/rc5t583' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/s5m8767' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/tps62360' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/tps65023' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/tps6586x' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/tps80031' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/twl' into v3.9-rc8
Merge remote-tracking branch 'regulator/topic/wm8994' into v3.9-rc8

Maxime Ripard (1):
regulator: Fix typo in of_get_regulator function comments

Nishanth Menon (1):
regulator: core: return err value for regulator_get if there is no DT binding

Rabin Vincent (1):
regulator: ab8500: Don't register external regulators on AB8505

Sylwester Nawrocki (1):
regulator: wm8994: Use GPIO parsed from DT when registering regulators

Thiago Farina (1):
regulators: max8998.c: use dev_err() instead of printk()

Tomasz Figa (2):
regulator: max8952: Separate constraints from platform data struct
regulator: max8952: Add Device Tree support

Zhenhua HUANG (1):
regulator: ab8500: Introduce aux5, aux6 regulators for AB8540

Documentation/devicetree/bindings/mfd/mc13xxx.txt | 36 +-
.../devicetree/bindings/regulator/max8952.txt | 52 +
MAINTAINERS | 2 +-
arch/arm/mach-exynos/mach-universal_c210.c | 27 +-
arch/arm/mach-ux500/board-mop500-regulators.c | 774 +++++-
arch/arm/mach-ux500/board-mop500-regulators.h | 7 +-
arch/arm/mach-ux500/board-mop500.c | 5 +-
drivers/mfd/ab3100-core.c | 1 +
drivers/regulator/88pm8607.c | 36 +-
drivers/regulator/Makefile | 2 +-
drivers/regulator/ab3100.c | 236 +-
drivers/regulator/ab8500-ext.c | 407 +++
drivers/regulator/ab8500.c | 2786 ++++++++++++++++++--
drivers/regulator/arizona-ldo1.c | 2 +-
drivers/regulator/as3711-regulator.c | 67 +-
drivers/regulator/core.c | 220 +-
drivers/regulator/dbx500-prcmu.h | 2 -
drivers/regulator/fan53555.c | 4 +-
drivers/regulator/lp3971.c | 2 +
drivers/regulator/lp3972.c | 2 +
drivers/regulator/lp872x.c | 3 +
drivers/regulator/lp8788-buck.c | 2 +
drivers/regulator/lp8788-ldo.c | 157 +-
drivers/regulator/max1586.c | 5 +-
drivers/regulator/max77686.c | 32 +-
drivers/regulator/max8649.c | 45 +-
drivers/regulator/max8660.c | 3 +-
drivers/regulator/max8925-regulator.c | 5 +-
drivers/regulator/max8952.c | 75 +-
drivers/regulator/max8973-regulator.c | 10 +-
drivers/regulator/max8997.c | 4 +-
drivers/regulator/max8998.c | 9 +-
drivers/regulator/mc13783-regulator.c | 44 +-
drivers/regulator/mc13892-regulator.c | 46 +-
drivers/regulator/mc13xxx-regulator-core.c | 17 +-
drivers/regulator/mc13xxx.h | 4 +-
drivers/regulator/palmas-regulator.c | 365 ++-
drivers/regulator/rc5t583-regulator.c | 6 -
drivers/regulator/s5m8767.c | 8 +-
drivers/regulator/tps62360-regulator.c | 2 +-
drivers/regulator/tps65023-regulator.c | 48 +-
drivers/regulator/tps6507x-regulator.c | 1 +
drivers/regulator/tps6524x-regulator.c | 4 +-
drivers/regulator/tps6586x-regulator.c | 7 +-
drivers/regulator/tps65910-regulator.c | 4 +
drivers/regulator/tps80031-regulator.c | 45 +-
drivers/regulator/twl-regulator.c | 34 +-
drivers/regulator/wm8994-regulator.c | 61 +-
include/linux/mfd/abx500/ab8500.h | 11 +-
include/linux/mfd/palmas.h | 24 +-
include/linux/regulator/ab8500.h | 217 +-
include/linux/regulator/consumer.h | 14 +-
include/linux/regulator/driver.h | 9 +-
include/linux/regulator/max8952.h | 10 +-
54 files changed, 5109 insertions(+), 892 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/max8952.txt
create mode 100644 drivers/regulator/ab8500-ext.c

Attachment: signature.asc
Description: Digital signature