Re: [PATCH] mfd: replace strict_strtoul() with kstrtoul()
From: Andy Shevchenko
Date: Sun Jun 02 2013 - 06:51:31 EST
On Sat, Jun 1, 2013 at 10:13 AM, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
> The usage of strict_strtoul() is not preferred, because
> strict_strtoul() is obsolete. Thus, kstrtoul() should be
> used.
> --- a/drivers/mfd/aat2870-core.c
> +++ b/drivers/mfd/aat2870-core.c
> @@ -312,7 +312,7 @@ static ssize_t aat2870_reg_write_file(struct file *file,
> while (*start == ' ')
> start++;
>
> - if (strict_strtoul(start, 16, &val))
> + if (kstrtoul(start, 16, &val))
> return -EINVAL;
ret = kstrtoul(...);
if (ret)
return ret;
> --- a/drivers/mfd/ab3100-core.c
> +++ b/drivers/mfd/ab3100-core.c
> @@ -514,13 +514,13 @@ static ssize_t ab3100_get_set_reg(struct file *file,
> /*
> * Advance pointer to end of string then terminate
> * the register string. This is needed to satisfy
> - * the strict_strtoul() function.
> + * the kstrtoul() function.
> */
> while ((i < buf_size) && (buf[i] != ' '))
> i++;
> buf[i] = '\0';
>
> - err = strict_strtoul(&buf[regp], 16, &user_reg);
> + err = kstrtoul(&buf[regp], 16, &user_reg);
> if (err)
> return err;
> if (user_reg > 0xff)
user_reg couldn't be more than byte.
So, you may change its definition to u8 and use here kstrtou8() and
remove later check.
But on first glance on that function it could be optimized a lot
(there are so many custom stuff like skip_space() and like that).
> @@ -557,7 +557,7 @@ static ssize_t ab3100_get_set_reg(struct file *file,
> i++;
> buf[i] = '\0';
>
> - err = strict_strtoul(&buf[valp], 16, &user_value);
> + err = kstrtoul(&buf[valp], 16, &user_value);
> if (err)
> return err;
> if (user_reg > 0xff)
Same idea here.
--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/