Re: [PATCH] mfd: replace strict_strtoul() with kstrtoul()
From: Jingoo Han
Date: Mon Jun 03 2013 - 03:03:09 EST
On Sunday, June 02, 2013 7:51 PM, Andy Shevchenko wrote:
> On Sat, Jun 1, 2013 at 10:13 AM, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
> > The usage of strict_strtoul() is not preferred, because
> > strict_strtoul() is obsolete. Thus, kstrtoul() should be
> > used.
>
> > --- a/drivers/mfd/aat2870-core.c
> > +++ b/drivers/mfd/aat2870-core.c
> > @@ -312,7 +312,7 @@ static ssize_t aat2870_reg_write_file(struct file *file,
> > while (*start == ' ')
> > start++;
> >
> > - if (strict_strtoul(start, 16, &val))
> > + if (kstrtoul(start, 16, &val))
> > return -EINVAL;
>
> ret = kstrtoul(...);
> if (ret)
> return ret;
>
> > --- a/drivers/mfd/ab3100-core.c
> > +++ b/drivers/mfd/ab3100-core.c
> > @@ -514,13 +514,13 @@ static ssize_t ab3100_get_set_reg(struct file *file,
> > /*
> > * Advance pointer to end of string then terminate
> > * the register string. This is needed to satisfy
> > - * the strict_strtoul() function.
> > + * the kstrtoul() function.
> > */
> > while ((i < buf_size) && (buf[i] != ' '))
> > i++;
> > buf[i] = '\0';
> >
> > - err = strict_strtoul(&buf[regp], 16, &user_reg);
> > + err = kstrtoul(&buf[regp], 16, &user_reg);
> > if (err)
> > return err;
> > if (user_reg > 0xff)
>
> user_reg couldn't be more than byte.
> So, you may change its definition to u8 and use here kstrtou8() and
> remove later check.
OK, I will change kstrtoul() to kstrtou8().
Best regards,
Jingoo Han
>
> But on first glance on that function it could be optimized a lot
> (there are so many custom stuff like skip_space() and like that).
>
> > @@ -557,7 +557,7 @@ static ssize_t ab3100_get_set_reg(struct file *file,
> > i++;
> > buf[i] = '\0';
> >
> > - err = strict_strtoul(&buf[valp], 16, &user_value);
> > + err = kstrtoul(&buf[valp], 16, &user_value);
> > if (err)
> > return err;
> > if (user_reg > 0xff)
>
> Same idea here.
>
> --
> With Best Regards,
> Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/