[PATCH v6 00/11] VFS hot tracking
From: Zhi Yong Wu
Date: Wed Nov 06 2013 - 08:48:12 EST
From: Zhi Yong Wu <wuzhy@xxxxxxxxxxxxxxxxxx>
The patchset is trying to introduce hot tracking function in
VFS layer, which will keep track of real disk I/O in memory.
By it, you will easily know more details about disk I/O, and
then detect where disk I/O hot spots are. Also, specific FS
can take use of it to do accurate defragment, and hot relocation
support, etc.
Now it's time to send out its V6 for external review, and
any comments or ideas are appreciated, thanks.
NOTE:
The patchset can be obtained via my kernel dev git on github:
git://github.com/wuzhy/kernel.git hot_tracking
If you're interested, you can also review them via
https://github.com/wuzhy/kernel/commits/hot_tracking
For how to use and more other info and performance report,
please check hot_tracking.txt in Documentation and following
links:
1.) http://lwn.net/Articles/525651/
2.) https://lkml.org/lkml/2012/12/20/199
This patchset has been done scalability or performance tests
by fs_mark, ffsb and compilebench.
The perf testings were done on Linux 3.12.0-rc7 with Model IBM,8231-E2C
Big Endian PPC64 with 64 CPUs and 2 NUMA nodes, 250G RAM and 1.50 TiB
test hard disk where each test file size is 20G or 100G.
Architecture: ppc64
Byte Order: Big Endian
CPU(s): 64
On-line CPU(s) list: 0-63
Thread(s) per core: 4
Core(s) per socket: 1
Socket(s): 16
NUMA node(s): 2
Model: IBM,8231-E2C
Hypervisor vendor: pHyp
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 4096K
NUMA node0 CPU(s): 0-31
NUMA node1 CPU(s): 32-63
Below is the perf testing report:
Please focus on the two key points:
- The overall overhead which is injected by the patchset
- The stability of the perf results
1. fio tests
w/o hot tracking w/ hot tracking
RAM size 32G 32G 16G 8G 4G 2G 250G
sequential-8k-1jobs-read 61260KB/s 60918KB/s 60901KB/s 62610KB/s 60992KB/s 60213KB/s 60948KB/s
sequential-8k-1jobs-write 1329KB/s 1329KB/s 1328KB/s 1329KB/s 1328KB/s 1329KB/s 1329KB/s
sequential-8k-8jobs-read 91139KB/s 92614KB/s 90907KB/s 89895KB/s 92022KB/s 90851KB/s 91877KB/s
sequential-8k-8jobs-write 2523KB/s 2522KB/s 2516KB/s 2521KB/s 2516KB/s 2518KB/s 2521KB/s
sequential-256k-1jobs-read 151432KB/s 151403KB/s 151406KB/s 151422KB/s 151344KB/s 151446KB/s 151372KB/s
sequential-256k-1jobs-write 33451KB/s 33470KB/s 33481KB/s 33470KB/s 33459KB/s 33472KB/s 33477KB/s
sequential-256k-8jobs-read 235291KB/s 234555KB/s 234251KB/s 233656KB/s 234927KB/s 236380KB/s 235535KB/s
sequential-256k-8jobs-write 62419KB/s 62402KB/s 62191KB/s 62859KB/s 62629KB/s 62720KB/s 62523KB/s
random-io-mix-8k-1jobs [READ] 2929KB/s 2942KB/s 2946KB/s 2929KB/s 2934KB/s 2947KB/s 2946KB/s
[WRITE] 1262KB/s 1266KB/s 1257KB/s 1262KB/s 1257KB/s 1257KB/s 1265KB/s
random-io-mix-8k-8jobs [READ] 2444KB/s 2442KB/s 2436KB/s 2416KB/s 2353KB/s 2441KB/s 2442KB/s
[WRITE] 1047KB/s 1044KB/s 1047KB/s 1028KB/s 1017KB/s 1034KB/s 1049KB/s
random-io-mix-8k-16jobs [READ] 2182KB/s 2184KB/s 2169KB/s 2178KB/s 2190KB/s 2184KB/s 2180KB/s
[WRITE] 932KB/s 930KB/s 943KB/s 936KB/s 937KB/s 929KB/s 931KB/s
The above perf parameter is the aggregate bandwidth of threads in the group;
If you hope to know how about other perf parameters, or fio raw results, please let me know, thanks.
2. Locking stat - Contention & Cacheline Bouncing
RAM size class name con-bounces contentions acq-bounces acquisitions cacheline bouncing locking contention
ratio ratio
&(&root->t_lock)->rlock: 1508 1592 157834 374639292 0.96% 0.00%
250G &(&root->m_lock)->rlock: 1469 1484 119221 43077842 1.23% 0.00%
&(&he->i_lock)->rlock: 0 0 101879 376755218 0.00% 0.00%
&(&root->t_lock)->rlock: 2912 2985 342575 374691186 0.85% 0.00%
32G &(&root->m_lock)->rlock: 188 193 307765 8803163 0.00% 0.00%
&(&he->i_lock)->rlock: 0 0 291860 376756084 0.00% 0.00%
&(&root->t_lock)->rlock: 3863 3948 298041 374727038 1.30% 0.00%
16G &(&root->m_lock)->rlock: 220 228 254451 8687057 0.00% 0.00%
&(&he->i_lock)->rlock: 0 0 235027 376756830 0.00% 0.00%
&(&root->t_lock)->rlock: 3283 3409 233790 374722064 1.40% 0.00%
8G &(&root->m_lock)->rlock: 136 139 203917 8684313 0.00% 0.00%
&(&he->i_lock)->rlock: 0 0 193746 376756438 0.00% 0.00%
&(&root->t_lock)->rlock: 15090 15705 283460 374889666 5.32% 0.00%
4G &(&root->m_lock)->rlock: 172 173 222480 8555052 0.00% 0.00%
&(&he->i_lock)->rlock: 0 0 206431 376759452 0.00% 0.00%
&(&root->t_lock)->rlock: 25515 27368 305129 375394828 8.36% 0.00%
2G &(&root->m_lock)->rlock: 100 101 216516 6752265 0.00% 0.00%
&(&he->i_lock)->rlock: 0 0 214713 376765169 0.00% 0.00%
3. Perf test - Cacheline Ping-pong
w/o hot tracking w/ hot tracking
RAM size 32G 32G 16G 8G 4G 2G 250G
cache-references 1,264,996,437,581 1,401,504,955,577 1,398,308,614,801 1,396,525,544,527 1,384,793,467,410 1,432,042,560,409 1,571,627,148,771
cache-misses 45,424,567,057 58,432,749,807 59,200,504,032 59,762,030,933 58,104,156,576 57,283,962,840 61,963,839,419
seconds time elapsed 22956.327674298 23035.457069488 23017.232397085 23012.397142967 23008.420970731 23057.245578767 23342.456015188
cache-misses ratio 3.591 % 4.169 % 4.234 % 4.279 % 4.196 % 4.000 % 3.943 %
Changelog from v5:
- Also added the hook hot_freqs_update() in the page cache I/O path,
not only in real disk I/O path [viro]
- Don't export the stuff until it's used by a module [viro]
- Splitted hot_inode_item_lookup() [viro]
- Prevented hot items from being re-created after the inode was unlinked. [viro]
- Made hot_freqs_update() to be inline and adopt one private hot flag [viro]
- Killed hot_bit_shift() [viro]
- Used file_inode() instead of file->f_dentry->d_inode [viro]
- Introduced one new file hot_tracking.h in include/uapi/linux/ [viro]
- Made the checks for ->i_nlink to be protectd by ->i_mutex [viro]
v5:
- Added all kinds of perf testing report [viro]
- Covered mmap() now [viro]
- Removed list_sort() in hot_update_worker() to avoid locking contention
and cacheline bouncing [viro]
- Removed a /proc interface to control low memory usage [Chandra]
- Adjusted shrinker support due to the change of public shrinker APIs [zwu]
- Fixed the locking missing issue when hot_inode_item_put() is called
in ioctl_heat_info() [viro]
- Fixed some locking contention issues [zwu]
v4:
- Removed debugfs support, but leave it to TODO list [viro, Chandra]
- Killed HOT_DELETING and HOT_IN_LIST flag [viro]
- Fixed unlink issues [viro]
- Fixed the issue on lookups (both for inode and range)
leak on race with unlink [viro]
- Killed hot_comm_item and split the functions which take it [virio]
- Fixed some other issues [zwu, Chandra]
v3:
- Added memory caping function for hot items [Zhiyong]
- Cleanup aging function [Zhiyong]
v2:
- Refactored to be under RCU [Chandra Seetharaman]
Merged some code changes [Chandra Seetharaman]
- Fixed some issues [Chandra Seetharaman]
v1:
- Solved 64 bits inode number issue. [David Sterba]
- Embed struct hot_type in struct file_system_type [Darrick J. Wong]
- Cleanup Some issues [David Sterba]
- Use a static hot debugfs root [Greg KH]
rfcv4:
- Introduce hot func registering framework [Zhiyong]
- Remove global variable for hot tracking [Zhiyong]
- Add btrfs hot tracking support [Zhiyong]
rfcv3:
1.) Rewritten debugfs support based seq_file operation. [Dave Chinner]
2.) Refactored workqueue support. [Dave Chinner]
3.) Turn some Micro into be tunable [Zhiyong, Liu Zheng]
TIME_TO_KICK, and HEAT_UPDATE_DELAY
4.) Cleanedup a lot of other issues [Dave Chinner]
rfcv2:
1.) Converted to Radix trees, not RB-tree [Zhiyong, Dave Chinner]
2.) Added memory shrinker [Dave Chinner]
3.) Converted to one workqueue to update map info periodically [Dave Chinner]
4.) Cleanedup a lot of other issues [Dave Chinner]
rfcv1:
1.) Reduce new files and put all in fs/hot_tracking.[ch] [Dave Chinner]
2.) The first three patches can probably just be flattened into one.
[Marco Stornelli , Dave Chinner]
Dave Chinner (1):
VFS hot tracking, xfs: Add hot tracking support
Zhi Yong Wu (10):
VFS hot tracking: Define basic data structures and functions
VFS hot tracking: Track IO and record heat information
VFS hot tracking: Add a workqueue to move items between hot maps
VFS hot tracking: Add shrinker functionality to curtail memory usage
VFS hot tracking: Add an ioctl to get hot tracking information
VFS hot tracking: Add a /proc interface to make the interval tunable
VFS hot tracking: Add a /proc interface to control memory usage
VFS hot tracking: Add documentation
VFS hot tracking, btrfs: Add hot tracking support
MAINTAINERS: add the maintainers for VFS hot tracking
Documentation/filesystems/00-INDEX | 2 +
Documentation/filesystems/hot_tracking.txt | 207 ++++++++
MAINTAINERS | 12 +
fs/Makefile | 2 +-
fs/btrfs/ctree.h | 1 +
fs/btrfs/super.c | 22 +-
fs/compat_ioctl.c | 5 +
fs/dcache.c | 2 +
fs/hot_tracking.c | 816 +++++++++++++++++++++++++++++
fs/hot_tracking.h | 72 +++
fs/ioctl.c | 71 +++
fs/namei.c | 4 +
fs/xfs/xfs_mount.h | 1 +
fs/xfs/xfs_super.c | 18 +
include/linux/fs.h | 4 +
include/linux/hot_tracking.h | 107 ++++
include/uapi/linux/fs.h | 1 +
include/uapi/linux/hot_tracking.h | 33 ++
kernel/sysctl.c | 14 +
mm/filemap.c | 24 +-
mm/readahead.c | 6 +
21 files changed, 1420 insertions(+), 4 deletions(-)
create mode 100644 Documentation/filesystems/hot_tracking.txt
create mode 100644 fs/hot_tracking.c
create mode 100644 fs/hot_tracking.h
create mode 100644 include/linux/hot_tracking.h
create mode 100644 include/uapi/linux/hot_tracking.h
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/