Re: [PATCH] it87_wdt: Work around non-working CIR interrupts

[Wim Van Sebroeck]

Hi Marc,

> From: Marc van der Wal <x0r+kernel@xxxxxx>
> 
> On some hardware platforms, the it87_wdt watchdog resets the machine
> despite the watchdog daemon running and writing to /dev/watchdog.
> 
> This is due to Consumer IR buffer underrun interrupts being used as
> triggers to reset the timer.  On some buggy hardware implementations
> such as the iEi AFL-12A-N270 single-board computer, this method does 
> not work.
> 
> However, resetting the timer by writing its original timeout value in
> its configuration register over and over again suppresses the unwanted
> reboots.
> 
> Add a module option (nocir), 0 by default in order not to break existing
> setups.  Setting it to 1 enables the workaround.
> 
> Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>.
> Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5.
> 
> Signed-off-by: Marc van der Wal <x0r+kernel@xxxxxx>
> ---

Patch has been added to linux-watchdog-next.

Kind regards,
Wim.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/