Re: [PATCH 1/2] devicetree: Add devicetree bindings documentation for Zynq Quad SPI

[SÃren Brinkmann]

Hi Punnaiah,

On Thu, 2014-04-03 at 10:33PM +0530, Punnaiah Choudary Kalluri wrote:
> Add bindings documentation for Zynq Quad SPI driver.
> 
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/spi/spi-zynq-qspi.txt      |   26 ++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
> new file mode 100644
> index 0000000..88e00f8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
> @@ -0,0 +1,26 @@
> +Xilinx Zynq QSPI controller Device Tree Bindings
> +-------------------------------------------------
> +
> +Required properties:
> +- compatible		: Should be "xlnx,zynq-qspi-1.0".
> +- reg			: Physical base address and size of QSPI registers map.
> +- interrupts		: Property with a value describing the interrupt
> +			  number.
> +- interrupt-parent	: Must be core interrupt controller
> +- clock-names		: List of input clock names - "ref_clk", "aper_clk"
> +			  (See clock bindings for details).
> +- clocks		: Clock phandles (see clock bindings for details).
> +
> +Optional properties:
> +- num-cs		: Number of chip selects used.
> +
> +Example:
> +	qspi@e000d000 {
> +		compatible = "xlnx,zynq-qspi-1.0";
> +		clock-names = "ref_clk", "aper_clk";

These seem to be the SOC names of the clocks. Doesn't have the IP its
own naming for these clock inputs?

	SÃren


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/