Re: [PATCHv2 1/2] iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC

[Chanwoo Choi]

Hi Sachin,

On 04/16/2014 12:48 PM, Sachin Kamat wrote:
> Hi Chanwoo,
> 
> On 14 April 2014 14:37, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote:
>> This patch control special clock for ADC in Exynos series's FSYS block.
>> If special clock of ADC is registerd on clock list of common clk framework,
>> Exynos ADC drvier have to control this clock.
>>
>> Exynos3250/Exynos4/Exynos5 has 'adc' clock as following:
>> - 'adc' clock: bus clock for ADC
>>
>> Exynos3250 has additional 'sclk_tsadc' clock as following:
>> - 'sclk_tsadc' clock: special clock for ADC which provide clock to internal ADC
>>
>> Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_tsadc' clock
>> in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included 'sclk_tsadc'
>> clock in FSYS_BLK.
>>
>> Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
>> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>> Cc: Naveen Krishna Chatradhi
>> Cc: linux-iio@xxxxxxxxxxxxxxx
>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> ---
>>  drivers/iio/adc/exynos_adc.c | 54 +++++++++++++++++++++++++++++++++-----------
>>  1 file changed, 41 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
>> index d25b262..3c99243 100644
>> --- a/drivers/iio/adc/exynos_adc.c
>> +++ b/drivers/iio/adc/exynos_adc.c
>> @@ -40,8 +40,9 @@
>>  #include <linux/iio/driver.h>
>>
>>  enum adc_version {
>> -       ADC_V1,
>> -       ADC_V2
>> +       ADC_V1 = 0x1,
>> +       ADC_V2 = 0x2,
>> +       ADC_V3 = (ADC_V1 | ADC_V2),
> 
> Can't this be simply 0x3? Or is this not really a h/w version?

Even thought ADC_V3 isn't h/w revision, ADC_V3 include all featues of ADC_V2
and only one difference of clock(sclk_tsadc) from ADC_V2.
I want to describethat ADC_V3 include ADC_V2 feature So, I add as following:
	>> +       ADC_V3 = (ADC_V1 | ADC_V2),

> 
>>  };
>>
>>  /* EXYNOS4412/5250 ADC_V1 registers definitions */
>> @@ -88,6 +89,7 @@ struct exynos_adc {
>>         void __iomem            *regs;
>>         void __iomem            *enable_reg;
>>         struct clk              *clk;
>> +       struct clk              *sclk;
>>         unsigned int            irq;
>>         struct regulator        *vdd;
>>
>> @@ -100,6 +102,7 @@ struct exynos_adc {
>>  static const struct of_device_id exynos_adc_match[] = {
>>         { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
>>         { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
>> +       { .compatible = "samsung,exynos-adc-v3", .data = (void *)ADC_V3 },
>>         {},
>>  };
>>  MODULE_DEVICE_TABLE(of, exynos_adc_match);
>> @@ -128,7 +131,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
>>         mutex_lock(&indio_dev->mlock);
>>
>>         /* Select the channel to be used and Trigger conversion */
>> -       if (info->version == ADC_V2) {
>> +       if (info->version & ADC_V2) {
> 
> So, now this would be applicable for ADC_V3 too, right?
> 
> 
>>                 con2 = readl(ADC_V2_CON2(info->regs));
>>                 con2 &= ~ADC_V2_CON2_ACH_MASK;
>>                 con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>> @@ -165,7 +168,7 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
>>         info->value = readl(ADC_V1_DATX(info->regs)) &
>>                                                 ADC_DATX_MASK;
>>         /* clear irq */
>> -       if (info->version == ADC_V2)
>> +       if (info->version & ADC_V2)
>>                 writel(1, ADC_V2_INT_ST(info->regs));
>>         else
>>                 writel(1, ADC_V1_INTCLR(info->regs));
>> @@ -226,11 +229,25 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
>>         return 0;
>>  }
>>
>> +static void exynos_adc_enable_clock(struct exynos_adc *info, bool enable)
>> +{
>> +       if (enable) {
>> +               clk_prepare_enable(info->clk);
> 
> This could fail. Is it OK without any checks?

OK, I'll check return value.
> 
>> +               if (info->version == ADC_V3)
>> +                       clk_prepare_enable(info->sclk);
> 
> ditto.

ditto.

> 
>> +
>> +       } else {
>> +               if (info->version == ADC_V3)
>> +                       clk_disable_unprepare(info->sclk);
>> +               clk_disable_unprepare(info->clk);
>> +       }
>> +}
>> +
>>  static void exynos_adc_hw_init(struct exynos_adc *info)
>>  {
>>         u32 con1, con2;
>>
>> -       if (info->version == ADC_V2) {
>> +       if (info->version & ADC_V2) {
>>                 con1 = ADC_V2_CON1_SOFT_RESET;
>>                 writel(con1, ADC_V2_CON1(info->regs));
>>
>> @@ -300,6 +317,8 @@ static int exynos_adc_probe(struct platform_device *pdev)
>>
>>         writel(1, info->enable_reg);
>>
>> +       info->version = exynos_adc_get_version(pdev);
>> +
>>         info->clk = devm_clk_get(&pdev->dev, "adc");
>>         if (IS_ERR(info->clk)) {
>>                 dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
>> @@ -308,6 +327,17 @@ static int exynos_adc_probe(struct platform_device *pdev)
>>                 goto err_irq;
>>         }
>>
>> +       if (info->version == ADC_V3) {
>> +               info->sclk = devm_clk_get(&pdev->dev, "sclk_tsadc");
>> +               if (IS_ERR(info->sclk)) {
>> +                       dev_warn(&pdev->dev,
>> +                               "failed getting sclk clock, err = %ld\n",
>> +                               PTR_ERR(info->sclk));
>> +                       ret = PTR_ERR(info->sclk);
> 
> nit: you could move this line above dev_warn and use 'ret' in the print
> statement.

As I knew, usually show log meesage and then initialize return value.
But If you find this code ugly, I can fix it.

Thanks for your review.

Best Regards,
Chanwoo Choi


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/