[PATCH 0/4] ARM: berlin: add SDHCI support

[Antoine TÃnart]

This series adds the support for the SDHCI controller for Marvell Berlin
SoCs and enable the SD card reader and eMMC for the BG2Q DMP. The
controller supports 3 sockets.

Tested on the BG2Q DMP.

This series applies on top of Alexandre's patches for the Berlin's pll:
https://patchwork.kernel.org/patch/3890341/
https://patchwork.kernel.org/patch/3876271/

Antoine TÃnart (4):
  mmc: sdhci: add a driver for Berlin SoCs
  Documentation: bindings: add the sdhci-berlin
  ARM: dts: berlin: add the SDHCI nodes for the BG2Q
  ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP

 .../devicetree/bindings/mmc/sdhci-berlin.txt       |  18 +++
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts         |   8 ++
 arch/arm/boot/dts/berlin2q.dtsi                    |  40 +++++++
 drivers/mmc/host/Kconfig                           |  11 ++
 drivers/mmc/host/Makefile                          |   1 +
 drivers/mmc/host/sdhci-berlin.c                    | 129 +++++++++++++++++++++
 6 files changed, 207 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-berlin.txt
 create mode 100644 drivers/mmc/host/sdhci-berlin.c

-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/