Re: [PATCH] pinctrl-baytrail: fix for irq descriptor conflict on ASUS T100TA

[Jin, Yao]

For the issue that touch screen doesn't work, could you check power
state of LPSS devices? For example:

cd /sys/bus/acpi/devices
grep -H . */power_state

If they are D3cold, it should be the reason why touch screen doesn't
work. That's another issue, unrelated to this gpio patch.

On 2014/4/20 18:31, Jin, Yao wrote:
> 
> 
> On 2014/4/19 4:44, Benjamin Tissoires wrote:
>> On Wed, Apr 16, 2014 at 8:05 AM, Jin Yao <yao.jin@xxxxxxxxxxxxxxx> wrote:
>>> A crash is triggered on the ASUS T100TA Baytrail-T because of a irq
>>> descriptor conflict. There are two gpio triggered acpi events in this
>>> device, GPIO 6 and 18. These gpios are translated to irqs by calling
>>> gpio_to_irq which in turn will call irq_create_mapping(vg->domain, offset).
>>> irq_create_mapping will take care of allocating the irq descriptor, taking
>>> the first available number starting from the given value (6 in our case).
>>> The 0-15 are already reserved by legacy ISA code, so it gets the first
>>> free irq descriptor which is number 16. The i915 driver also uses irq 16,
>>> it loads later than gpio and crashes in probe.
>>>
>>> The bug is reported here:
>>> https://bugzilla.kernel.org/show_bug.cgi?id=68291
>>
>> Adam, the reporter of this bug told me that his touchscreen was broken
>> in its tablet.
> This bug is triggered when system boots, or rather, it's triggered in
> i915 probe, because i915 still uses irq 16 but it's allocated for gpio
> yet. It's not a touchscreen case.
> 
>> I strongly suspect this patch to be the root cause of this, because
>> the touchscreen uses i2c_hid. i2c_hid relies on an IRQ declared in the
>> DSDT when it is acpi enumerated, and since the inclusion of this
>> patch, no irq are triggered from a driver point of view.
>>
>> Adam should still confirm that the revert of the patch makes the
>> touchscreen back alive, but if I understood correctly the bug report,
>> without the patch, his tablet oopses at boot.
> Do you mean this patch cause the touchscreen doesn't work? I suspect
> that because the touch screen works on my T100 with this patch.
> 
>>
>> Still, it would be good if you could check that shifting the irqs in
>> the pinctrl is or is not a problem with the irqs used for i2c devices
>> (and others) declared in the dsdt.
> I checked DSDT of ASUS T100, looks no irq conflict after irq shifting.
> 
>>
>> Cheers,
>> Benjamin
>>
>>>
>>> The rootcause we know now is a low level irq issue. It needs a long term
>>> solution to fix the issue in irq system.
>>>
>>> This patch changes the Baytrail GPIO driver to avoid the irq descriptor
>>> conflict. It still uses the irq domain to allocate irq descriptor but start
>>> from a predefined irq base number (256) to avoid the conflict.
>>>
>>> Signed-off-by: Jin Yao <yao.jin@xxxxxxxxxxxxxxx>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/