Re: [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller

[Felipe Balbi]

On Sun, Apr 20, 2014 at 09:57:03PM +0530, Punnaiah Choudary Kalluri wrote:
> Zynq soc contains a dual role usb controller and this IP is from synopsys. We
> observed that there is driver available for this controller from freescale and
> decided to reuse this driver for zynq use.
> 
> Here is the link for zynq soc TRM. Please refer chapter 15 for usb controller
> related information.
> http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
> 
> The following series of patches add initial support for zynq soc in fsl gadget controller
> driver and fsl host controller driver.
> 
> Based on these patches, I have the following concerns and sugesstions
> 
> Since the freescale usb driver is for synopsys IP, Please consider rebranding
> this driver name and config options to reflect that it is a sysnopsys IP. So
> that other vendors who using this IP can reuse thie driver.
> 
> Also the ehci-fsl.c is for powerpc based soc's, and zynq is ARM based, i have
> protected the code which is specifc to freescale with CONFIG_FSL_SOC. Please
> suggest if there is a better way of doing this?
> 
> Punnaiah Choudary Kalluri (2):
>   usb: gadget: fsl_udc: Add support for zynq usb device controller
>   usb: ehci-fsl: Add support for zynq usb host controller
> 
>  drivers/usb/gadget/Kconfig        |    2 +-
>  drivers/usb/gadget/Makefile       |    1 +
>  drivers/usb/gadget/fsl_mxc_udc.c  |   21 ++++++++++++
>  drivers/usb/gadget/fsl_udc_core.c |    5 +++
>  drivers/usb/gadget/fsl_usb2_udc.h |    2 +-
>  drivers/usb/host/Kconfig          |    2 +-
>  drivers/usb/host/ehci-fsl.c       |   63 ++++++++++++++++++++++++++++++++++++-
>  drivers/usb/host/fsl-mph-dr-of.c  |    9 +++++
>  8 files changed, 101 insertions(+), 4 deletions(-)

as somebody else already mentioned, chipidea is the way to go.


-- 
balbi

Attachment: signature.asc
Description: Digital signature