[PATCH 3/3] serial: samsung: Change barrier() to cpu_relax() in console output

[Doug Anderson]

The two functions to write out to the console (one used in normal
console mode and one in polling console mode) were slightly different.
One used a barrier() in its loop and the other a cpu_relax().  The
barrier() really doesn't do anything since we're using rd_regl() to
read the port anyway.  Switch it to cpu_relax() to make things
consistent.

No known bugs / issues are fixed by this change--it just makes things
more consistent.

Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
 drivers/tty/serial/samsung.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 12442748..1f5505e 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1466,7 +1466,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 	unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
-		barrier();
+		cpu_relax();
 	wr_regb(port, S3C2410_UTXH, ch);
 }
 
-- 
1.9.1.423.g4596e3a

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/