Re: [Intel-gfx] [Bug 3.15-rc2] [bisected] intel framebuffer broken

From: Imre Deak
Date: Tue Apr 22 2014 - 12:23:38 EST

Next message: Sam Ravnborg: "Re: [PATCH 06/28] nios2: Memory management"
Previous message: Alexandre Belloni: "Re: [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031"
In reply to: Ville Syrjälä: "Re: [Intel-gfx] [PATCH] drm/i915: Discard BIOS framebuffers too small to accommodate chosen mode"
Next in thread: Daniel Vetter: "Re: [Intel-gfx] [Bug 3.15-rc2] [bisected] intel framebuffer broken"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 2014-04-22 at 18:10 +0300, Jani Nikula wrote:
> Knut, thanks for a quick bisect.
>
> Imre, please have a look at the sdvo WARN related to sysfs links in the
> dmesg.

It's probably the same WARN fixed by:
http://patchwork.freedesktop.org/patch/24126/

--Imre
>
> Daniel, you have any ideas about the bios fbdev stuff while Jesse's
> traveling?
>
> BR,
> Jani.
>
>
>
> On Tue, 22 Apr 2014, Knut Petersen <Knut_Petersen@xxxxxxxxxxx> wrote:
> > On 22.04.2014 13:54, Jani Nikula wrote:
> >> On Mon, 21 Apr 2014, Knut Petersen <Knut_Petersen@xxxxxxxxxxx> wrote:
> >>> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
> >>> Only about the upper left quarter of the monitor is used for displaying the boot messages,
> >>> these (and the cursor) are replicated at the right of that area.
> >> Is this before or after i915.ko is loaded?
> > No .ko, it's compiled directly into the kernel.
> >
> > First bad commit is d978ef14456a38034f6c0e94a794129501f89200
> > (drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12)
> >
> > Probably there needs to be a v13 ;-)
> >
> > cu,
> > Knut
> >
> >
> >>
> >>> Approximately the lower half of the monitor stays black. The output of the xserver
> >>> is not affected.
> >> Most likely the fastest way to root cause is to bisect, please do. To
> >> keep track of all the bugs we have, please file a bug on DRM/Intel at
> >> [1] and while at it attach dmesg with drm.debug=0xe from the boot.
> >>
> >> BR,
> >> Jani.
> >>
> >>
> >> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
> >>
> >>
> >
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 3.13.0-main-01064-gd978ef1 (knut@golem) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #131 PREEMPT Tue Apr 22 15:32:59 CEST 2014
> > [ 0.000000] Disabled fast string operations
> > [ 0.000000] e820: BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] ACPI NVS
> > [ 0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] ACPI data
> > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> > [ 0.000000] NX (Execute Disable) protection: active
> > [ 0.000000] SMBIOS 2.3 present.
> > [ 0.000000] DMI: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
> > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> > [ 0.000000] e820: last_pfn = 0x7f7f0 max_arch_pfn = 0x1000000
> > [ 0.000000] MTRR default type: uncachable
> > [ 0.000000] MTRR fixed ranges enabled:
> > [ 0.000000] 00000-9FFFF write-back
> > [ 0.000000] A0000-F7FFF uncachable
> > [ 0.000000] F8000-FBFFF write-through
> > [ 0.000000] FC000-FFFFF uncachable
> > [ 0.000000] MTRR variable ranges enabled:
> > [ 0.000000] 0 base 000000000 mask F80000000 write-back
> > [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
> > [ 0.000000] 2 disabled
> > [ 0.000000] 3 disabled
> > [ 0.000000] 4 disabled
> > [ 0.000000] 5 disabled
> > [ 0.000000] 6 disabled
> > [ 0.000000] 7 disabled
> > [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
> > [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
> > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
> > [ 0.000000] [mem 0x37600000-0x377fffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
> > [ 0.000000] [mem 0x34000000-0x375fffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
> > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> > [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfdfff]
> > [ 0.000000] [mem 0x37800000-0x379fffff] page 2M
> > [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
> > [ 0.000000] BRK [0x00de1000, 0x00de1fff] PGTABLE
> > [ 0.000000] RAMDISK: [mem 0x379fb000-0x37feffff]
> > [ 0.000000] Allocated new RAMDISK: [mem 0x37406000-0x379fa331]
> > [ 0.000000] Move RAMDISK from [mem 0x379fb000-0x37fef331] to [mem 0x37406000-0x379fa331]
> > [ 0.000000] ACPI: RSDP 000f9320 000014 (v00 AOpen )
> > [ 0.000000] ACPI: RSDT 7f7f3040 000038 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: FACP 7f7f30c0 000074 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: DSDT 7f7f3180 0042E3 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000E)
> > [ 0.000000] ACPI: FACS 7f7f0000 000040
> > [ 0.000000] ACPI: MCFG 7f7f7580 00003C (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: APIC 7f7f74c0 00005A (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: SSDT 7f7f7600 000222 (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
> > [ 0.000000] ACPI: SSDT 7f7f7a00 0000E0 (v01 PmRef CpuPm 00003000 INTL 20040311)
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] 1147MB HIGHMEM available.
> > [ 0.000000] 891MB LOWMEM available.
> > [ 0.000000] mapped low ram: 0 - 37bfe000
> > [ 0.000000] low ram: 0 - 37bfe000
> > [ 0.000000] BRK [0x00de2000, 0x00de2fff] PGTABLE
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> > [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
> > [ 0.000000] HighMem [mem 0x37bfe000-0x7f7effff]
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> > [ 0.000000] node 0: [mem 0x00100000-0x7f7effff]
> > [ 0.000000] On node 0 totalpages: 522125
> > [ 0.000000] free_area_init_node: node 0, pgdat c07ee748, node_mem_map f6416020
> > [ 0.000000] DMA zone: 32 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> > [ 0.000000] Normal zone: 1752 pages used for memmap
> > [ 0.000000] Normal zone: 224254 pages, LIFO batch:31
> > [ 0.000000] HighMem zone: 2296 pages used for memmap
> > [ 0.000000] HighMem zone: 293874 pages, LIFO batch:31
> > [ 0.000000] Using APIC driver default
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] nr_irqs_gsi: 40
> > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> > [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
> > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> > [ 0.000000] pcpu-alloc: [0] 0
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520341
> > [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-KINGSTON_SKC100S3120G_50026B722C05CA1A-part1 netconsole=6665@xxxxxxxxxxxxx/eth0,6666@xxxxxxxxxxxxx/00:01:80:62:cf:b1 sky2.legacy_pme=1 acpi_enforce_resources=lax drm.debug=0xe 3 resume=/dev/sda3 i915.fastboot=1 pci=use_crs
> > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f7f0)
> > [ 0.000000] Memory: 2051848K/2088500K available (4486K kernel code, 392K rwdata, 2252K rodata, 500K init, 5504K bss, 36652K reserved, 1175496K highmem)
> > [ 0.000000] virtual kernel memory layout:
> > fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
> > pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
> > vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
> > lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
> > .init : 0xc07f9000 - 0xc0876000 ( 500 kB)
> > .data : 0xc0561c7f - 0xc07f8100 (2649 kB)
> > .text : 0xc0100000 - 0xc0561c7f (4487 kB)
> > [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> > [ 0.000000] Preemptible hierarchical RCU implementation.
> > [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
> > [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
> > [ 0.000000] Console: colour VGA+ 80x25
> > [ 0.000000] console [tty0] enabled
> > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> > [ 0.000000] ... MAX_LOCK_DEPTH: 48
> > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> > [ 0.000000] ... CLASSHASH_SIZE: 4096
> > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> > [ 0.000000] ... CHAINHASH_SIZE: 16384
> > [ 0.000000] memory used by lock dependency info: 3567 kB
> > [ 0.000000] per task-struct memory footprint: 1152 bytes
> > [ 0.000000] tsc: Fast TSC calibration using PIT
> > [ 0.000000] tsc: Detected 1862.782 MHz processor
> > [ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.56 BogoMIPS (lpj=7451128)
> > [ 0.008276] pid_max: default: 32768 minimum: 301
> > [ 0.008476] Security Framework initialized
> > [ 0.008623] AppArmor: AppArmor initialized
> > [ 0.008774] Mount-cache hash table entries: 512
> > [ 0.010338] Disabled fast string operations
> > [ 0.010480] mce: CPU supports 5 MCE banks
> > [ 0.010621] CPU0: Thermal monitoring enabled (TM1)
> > [ 0.010774] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
> > Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
> > tlb_flushall_shift: 6
> > [ 0.011132] CPU: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
> > [ 0.011488] ACPI: Core revision 20131115
> > [ 0.020622] ACPI: All ACPI Tables successfully acquired
> > [ 0.024017] ftrace: allocating 22743 entries in 45 pages
> > [ 0.036596] Performance Events: p6 PMU driver.
> > [ 0.036777] ... version: 0
> > [ 0.036909] ... bit width: 32
> > [ 0.037041] ... generic registers: 2
> > [ 0.037173] ... value mask: 00000000ffffffff
> > [ 0.037310] ... max period: 000000007fffffff
> > [ 0.037446] ... fixed-purpose events: 0
> > [ 0.037578] ... event mask: 0000000000000003
> > [ 0.040928] Enabling APIC mode: Flat. Using 1 I/O APICs
> > [ 0.041531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.044149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> > [ 0.084000] devtmpfs: initialized
> > [ 0.084000] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2fff] (12288 bytes)
> > [ 0.084000] NET: Registered protocol family 16
> > [ 0.084000] cpuidle: using governor ladder
> > [ 0.084006] cpuidle: using governor menu
> > [ 0.084310] ACPI: bus type PCI registered
> > [ 0.084660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> > [ 0.084907] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> > [ 0.085047] PCI: Using MMCONFIG for extended config space
> > [ 0.085183] PCI: Using configuration type 1 for base access
> > [ 0.090388] bio: create slab <bio-0> at 0
> > [ 0.090801] ACPI: Added _OSI(Module Device)
> > [ 0.090936] ACPI: Added _OSI(Processor Device)
> > [ 0.091072] ACPI: Added _OSI(3.0 _SCP Extensions)
> > [ 0.091206] ACPI: Added _OSI(Processor Aggregator Device)
> > [ 0.108176] ACPI: Interpreter enabled
> > [ 0.108321] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
> > [ 0.108617] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> > [ 0.108971] ACPI: (supports S0 S3 S4 S5)
> > [ 0.109104] ACPI: Using IOAPIC for interrupt routing
> > [ 0.109311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> > [ 0.129899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> > [ 0.130047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> > [ 0.130402] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> > [ 0.131088] PCI host bridge to bus 0000:00
> > [ 0.131224] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [ 0.131364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> > [ 0.131503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> > [ 0.131644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> > [ 0.131786] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
> > [ 0.131927] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff]
> > [ 0.132104] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
> > [ 0.132605] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
> > [ 0.132626] pci 0000:00:02.0: reg 0x10: [mem 0xd5300000-0xd537ffff]
> > [ 0.132638] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407]
> > [ 0.132652] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
> > [ 0.132665] pci 0000:00:02.0: reg 0x1c: [mem 0xd5400000-0xd543ffff]
> > [ 0.132984] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
> > [ 0.133002] pci 0000:00:02.1: reg 0x10: [mem 0xd5380000-0xd53fffff]
> > [ 0.133397] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
> > [ 0.133424] pci 0000:00:1b.0: reg 0x10: [mem 0xd5440000-0xd5443fff 64bit]
> > [ 0.133538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > [ 0.133967] pci 0000:00:1b.0: System wakeup disabled by ACPI
> > [ 0.134209] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
> > [ 0.134318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > [ 0.134539] pci 0000:00:1c.0: System wakeup disabled by ACPI
> > [ 0.134778] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
> > [ 0.134900] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> > [ 0.135121] pci 0000:00:1c.1: System wakeup disabled by ACPI
> > [ 0.135360] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
> > [ 0.135477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> > [ 0.135700] pci 0000:00:1c.2: System wakeup disabled by ACPI
> > [ 0.136029] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
> > [ 0.136146] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> > [ 0.136368] pci 0000:00:1c.3: System wakeup disabled by ACPI
> > [ 0.136613] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
> > [ 0.136677] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
> > [ 0.136916] pci 0000:00:1d.0: System wakeup disabled by ACPI
> > [ 0.137154] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
> > [ 0.137218] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
> > [ 0.137457] pci 0000:00:1d.1: System wakeup disabled by ACPI
> > [ 0.137695] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
> > [ 0.137759] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
> > [ 0.137998] pci 0000:00:1d.2: System wakeup disabled by ACPI
> > [ 0.138235] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
> > [ 0.138299] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
> > [ 0.138538] pci 0000:00:1d.3: System wakeup disabled by ACPI
> > [ 0.138788] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
> > [ 0.138815] pci 0000:00:1d.7: reg 0x10: [mem 0xd5444000-0xd54443ff]
> > [ 0.138930] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> > [ 0.139141] pci 0000:00:1d.7: System wakeup disabled by ACPI
> > [ 0.139383] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
> > [ 0.139668] pci 0000:00:1e.0: System wakeup disabled by ACPI
> > [ 0.139908] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
> > [ 0.140046] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> > [ 0.140058] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
> > [ 0.140306] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH6 GPIO
> > [ 0.140452] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
> > [ 0.140593] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
> > [ 0.141015] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
> > [ 0.141039] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
> > [ 0.141054] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
> > [ 0.141068] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
> > [ 0.141082] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
> > [ 0.141097] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
> > [ 0.141158] pci 0000:00:1f.2: PME# supported from D3hot
> > [ 0.141459] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
> > [ 0.141533] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
> > [ 0.141952] pci 0000:00:1c.0: PCI bridge to [bus 01]
> > [ 0.142095] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
> > [ 0.142105] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
> > [ 0.142248] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
> > [ 0.142283] pci 0000:02:00.0: reg 0x10: [mem 0xd5220000-0xd5223fff 64bit]
> > [ 0.142302] pci 0000:02:00.0: reg 0x18: [io 0xa000-0xa0ff]
> > [ 0.142363] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
> > [ 0.142461] pci 0000:02:00.0: supports D1 D2
> > [ 0.142465] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 0.142583] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> > [ 0.144137] pci 0000:00:1c.1: PCI bridge to [bus 02]
> > [ 0.144277] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
> > [ 0.144285] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
> > [ 0.144437] pci 0000:03:00.0: [11ab:4362] type 00 class 0x020000
> > [ 0.144471] pci 0000:03:00.0: reg 0x10: [mem 0xd5020000-0xd5023fff 64bit]
> > [ 0.144490] pci 0000:03:00.0: reg 0x18: [io 0xb000-0xb0ff]
> > [ 0.144551] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
> > [ 0.144649] pci 0000:03:00.0: supports D1 D2
> > [ 0.144653] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 0.144771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> > [ 0.145029] pci 0000:00:1c.2: PCI bridge to [bus 03]
> > [ 0.145169] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
> > [ 0.145177] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
> > [ 0.145322] pci 0000:04:00.0: [1095:3132] type 00 class 0x010400
> > [ 0.145361] pci 0000:04:00.0: reg 0x10: [mem 0xd5184000-0xd518407f 64bit]
> > [ 0.145391] pci 0000:04:00.0: reg 0x18: [mem 0xd5180000-0xd5183fff 64bit]
> > [ 0.145411] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc07f]
> > [ 0.145448] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
> > [ 0.145541] pci 0000:04:00.0: supports D1 D2
> > [ 0.145644] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> > [ 0.145908] pci 0000:00:1c.3: PCI bridge to [bus 04]
> > [ 0.146048] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
> > [ 0.146055] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
> > [ 0.146169] pci 0000:05:04.0: [1397:2bd0] type 00 class 0x028000
> > [ 0.148008] pci 0000:05:04.0: reg 0x10: [io 0xd000-0xd007]
> > [ 0.148025] pci 0000:05:04.0: reg 0x14: [mem 0xd4000000-0xd40000ff]
> > [ 0.148128] pci 0000:05:04.0: supports D1 D2
> > [ 0.148132] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
> > [ 0.148262] pci 0000:05:05.0: [14f1:8800] type 00 class 0x040000
> > [ 0.148293] pci 0000:05:05.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
> > [ 0.148525] pci 0000:05:05.1: [14f1:8801] type 00 class 0x048000
> > [ 0.148552] pci 0000:05:05.1: reg 0x10: [mem 0xd1000000-0xd1ffffff]
> > [ 0.148767] pci 0000:05:05.2: [14f1:8802] type 00 class 0x048000
> > [ 0.148794] pci 0000:05:05.2: reg 0x10: [mem 0xd2000000-0xd2ffffff]
> > [ 0.149010] pci 0000:05:05.4: [14f1:8804] type 00 class 0x048000
> > [ 0.149037] pci 0000:05:05.4: reg 0x10: [mem 0xd3000000-0xd3ffffff]
> > [ 0.149294] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
> > [ 0.149435] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> > [ 0.149443] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
> > [ 0.149454] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> > [ 0.149459] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> > [ 0.149464] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> > [ 0.149469] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
> > [ 0.149474] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfebfffff] (subtractive decode)
> > [ 0.149538] pci_bus 0000:00: on NUMA node 0
> > [ 0.151829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> > [ 0.152467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
> > [ 0.153101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> > [ 0.153737] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> > [ 0.154371] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> > [ 0.155152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> > [ 0.155931] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> > [ 0.156704] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
> > [ 0.157899] ACPI: \_SB_.PCI0: notify handler is installed
> > [ 0.158068] Found 1 acpi root devices
> > [ 0.158733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > [ 0.158992] vgaarb: loaded
> > [ 0.159123] vgaarb: bridge control possible 0000:00:02.0
> > [ 0.159465] SCSI subsystem initialized
> > [ 0.159727] libata version 3.00 loaded.
> > [ 0.159747] ACPI: bus type USB registered
> > [ 0.159934] usbcore: registered new interface driver usbfs
> > [ 0.160032] usbcore: registered new interface driver hub
> > [ 0.160222] usbcore: registered new device driver usb
> > [ 0.160430] PCI: Using ACPI for IRQ routing
> > [ 0.168904] PCI: pci_cache_line_size set to 64 bytes
> > [ 0.169011] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
> > [ 0.169026] e820: reserve RAM buffer [mem 0x7f7f0000-0x7fffffff]
> > [ 0.170027] hpet clockevent registered
> > [ 0.170034] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> > [ 0.170177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> > [ 0.170403] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> > [ 0.172268] Switched to clocksource hpet
> > [ 0.192062] AppArmor: AppArmor Filesystem Enabled
> > [ 0.192292] pnp: PnP ACPI init
> > [ 0.192494] ACPI: bus type PNP registered
> > [ 0.193133] system 00:00: [io 0x0b78-0x0b7b] has been reserved
> > [ 0.193278] system 00:00: [io 0x0f78-0x0f7b] has been reserved
> > [ 0.193419] system 00:00: [io 0x0a78-0x0a7b] has been reserved
> > [ 0.193558] system 00:00: [io 0x0e78-0x0e7b] has been reserved
> > [ 0.193700] system 00:00: [io 0x0bbc-0x0bbf] has been reserved
> > [ 0.193839] system 00:00: [io 0x0fbc-0x0fbf] has been reserved
> > [ 0.193980] system 00:00: [io 0x04d0-0x04d1] has been reserved
> > [ 0.194119] system 00:00: [io 0x0290-0x0297] has been reserved
> > [ 0.194259] system 00:00: [io 0x0880-0x088f] has been reserved
> > [ 0.194541] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.194582] pnp 00:01: [dma 4]
> > [ 0.194650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 0.194761] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 0.194847] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> > [ 0.194945] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 0.195660] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
> > [ 0.196252] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> > [ 0.197211] pnp 00:07: [dma 3]
> > [ 0.197323] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
> > [ 0.197510] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> > [ 0.197712] system 00:09: [io 0x4000-0x40bf] could not be reserved
> > [ 0.197859] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.197981] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
> > [ 0.198771] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
> > [ 0.198918] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.199426] system 00:0c: [mem 0x000d7800-0x000d7fff] has been reserved
> > [ 0.199571] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
> > [ 0.199714] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
> > [ 0.199858] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
> > [ 0.200001] system 00:0c: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
> > [ 0.200155] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
> > [ 0.200298] system 00:0c: [mem 0x00100000-0x7f7effff] could not be reserved
> > [ 0.200441] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
> > [ 0.200583] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
> > [ 0.200727] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
> > [ 0.200868] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
> > [ 0.201012] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
> > [ 0.201153] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
> > [ 0.201296] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
> > [ 0.201441] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 0.201467] pnp: PnP ACPI: found 13 devices
> > [ 0.201601] ACPI: bus type PNP unregistered
> > [ 0.241904] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
> > [ 0.241914] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
> > [ 0.241920] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
> > [ 0.241935] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
> > [ 0.241950] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
> > [ 0.241965] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
> > [ 0.241988] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
> > [ 0.241993] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> > [ 0.241999] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> > [ 0.242004] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> > [ 0.242009] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> > [ 0.242014] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> > [ 0.242024] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
> > [ 0.242171] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
> > [ 0.242417] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x806fffff pref]
> > [ 0.242660] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80700000-0x809fffff pref]
> > [ 0.242903] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80cfffff pref]
> > [ 0.243148] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
> > [ 0.243290] pci 0000:00:1c.0: PCI bridge to [bus 01]
> > [ 0.243429] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> > [ 0.243572] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
> > [ 0.243717] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
> > [ 0.243967] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041ffff pref]
> > [ 0.244216] pci 0000:00:1c.1: PCI bridge to [bus 02]
> > [ 0.244355] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
> > [ 0.244497] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
> > [ 0.244642] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x806fffff pref]
> > [ 0.244889] pci 0000:03:00.0: BAR 6: assigned [mem 0x80700000-0x8071ffff pref]
> > [ 0.245128] pci 0000:00:1c.2: PCI bridge to [bus 03]
> > [ 0.245265] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
> > [ 0.245411] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
> > [ 0.245555] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x809fffff pref]
> > [ 0.245802] pci 0000:04:00.0: BAR 6: assigned [mem 0x80a00000-0x80a7ffff pref]
> > [ 0.246044] pci 0000:00:1c.3: PCI bridge to [bus 04]
> > [ 0.246181] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
> > [ 0.246324] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
> > [ 0.246467] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80cfffff pref]
> > [ 0.246716] pci 0000:00:1e.0: PCI bridge to [bus 05]
> > [ 0.246853] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> > [ 0.246998] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
> > [ 0.247147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> > [ 0.247152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> > [ 0.247156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> > [ 0.247161] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
> > [ 0.247165] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xfebfffff]
> > [ 0.247170] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
> > [ 0.247174] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
> > [ 0.247179] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
> > [ 0.247184] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
> > [ 0.247188] pci_bus 0000:02: resource 1 [mem 0xd5200000-0xd52fffff]
> > [ 0.247192] pci_bus 0000:02: resource 2 [mem 0x80400000-0x806fffff pref]
> > [ 0.247197] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
> > [ 0.247202] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd50fffff]
> > [ 0.247206] pci_bus 0000:03: resource 2 [mem 0x80700000-0x809fffff pref]
> > [ 0.247211] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
> > [ 0.247215] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd51fffff]
> > [ 0.247219] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80cfffff pref]
> > [ 0.247224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> > [ 0.247228] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd4ffffff]
> > [ 0.247233] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
> > [ 0.247237] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
> > [ 0.247242] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
> > [ 0.247246] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
> > [ 0.247250] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xfebfffff]
> > [ 0.247326] NET: Registered protocol family 2
> > [ 0.248104] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> > [ 0.248323] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
> > [ 0.249510] TCP: Hash tables configured (established 8192 bind 8192)
> > [ 0.249731] TCP: reno registered
> > [ 0.249867] UDP hash table entries: 512 (order: 3, 40960 bytes)
> > [ 0.250144] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
> > [ 0.250721] NET: Registered protocol family 1
> > [ 0.250882] pci 0000:00:02.0: Boot video device
> > [ 1.852022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
> > [ 1.852465] PCI: CLS 32 bytes, default 64
> > [ 1.852853] Unpacking initramfs...
> > [ 2.103109] Freeing initrd memory: 6100K (f7406000 - f79fb000)
> > [ 2.103891] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
> > [ 2.104297] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> > [ 2.105286] audit: initializing netlink socket (disabled)
> > [ 2.105504] type=2000 audit(1398174179.104:1): initialized
> > [ 2.145984] bounce pool size: 64 pages
> > [ 2.146121] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> > [ 2.146615] VFS: Disk quotas dquot_6.5.2
> > [ 2.146765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > [ 2.147322] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> > [ 2.147796] fuse init (API version 7.22)
> > [ 2.148062] msgmni has been set to 1723
> > [ 2.161978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> > [ 2.162254] io scheduler noop registered
> > [ 2.162388] io scheduler deadline registered
> > [ 2.162527] io scheduler cfq registered (default)
> > [ 2.163007] pcieport 0000:00:1c.0: enabling device (0100 -> 0103)
> > [ 2.163645] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
> > [ 2.164295] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
> > [ 2.164727] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
> > [ 2.165139] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
> > [ 2.165603] intel_idle: does not run on family 6 model 13
> > [ 2.165824] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> > [ 2.166146] ACPI: Power Button [PWRB]
> > [ 2.166436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> > [ 2.166682] ACPI: Power Button [PWRF]
> > [ 2.167069] ACPI: Fan [FAN] (on)
> > [ 2.167381] ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points
> > [ 2.167622] ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points
> > [ 2.167861] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling
> > [ 2.169578] thermal LNXTHERM:00: registered as thermal_zone0
> > [ 2.169717] ACPI: Thermal Zone [THRM] (61 C)
> > [ 2.169971] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
> > [ 2.190965] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> > [ 2.212060] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> > [ 2.216353] lp: driver loaded but no devices found
> > [ 2.216724] Non-volatile memory driver v1.3
> > [ 2.216855] Linux agpgart interface v0.103
> > [ 2.217101] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
> > [ 2.217336] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
> > [ 2.218068] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
> > [ 2.218520] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
> > [ 2.218758] [drm] Initialized drm 1.1.0 20060810
> > [ 2.221333] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
> > [ 2.221459] [drm:intel_detect_pch], No PCH found?
> > [ 2.221465] [drm] Memory usable by graphics device = 256M
> > [ 2.221601] [drm:i915_gem_gtt_init], GMADR size = 256M
> > [ 2.221604] [drm:i915_gem_gtt_init], GTT stolen size = 8M
> > [ 2.222858] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
> > [ 2.222864] [drm:intel_opregion_setup], ACPI OpRegion not supported!
> > [ 2.222931] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [ 2.223076] [drm] Driver supports precise vblank timestamp query.
> > [ 2.223216] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
> > [ 2.223653] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
> > [ 2.223659] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> > [ 2.223692] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
> > [ 2.223698] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> > [ 2.223720] [drm:parse_lfp_panel_data], VBT initial LVDS value 40000300
> > [ 2.223733] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0
> > [ 2.223755] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
> > [ 2.223761] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> > [ 2.223767] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
> > [ 2.223773] [drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
> > [ 2.223777] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 72 is found on SDVOC port
> > [ 2.223782] [drm:parse_sdvo_device_mapping], SDVO device: dvo=2, addr=72, wiring=0, ddc_pin=29, i2c_pin=5
> > [ 2.223833] [drm:parse_mipi], No MIPI BDB found
> > [ 2.223922] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
> > [ 2.223985] [drm:intel_display_power_get], enabling always-on
> > [ 2.224405] [drm:intel_modeset_init], 2 display pipes available.
> > [ 2.224508] [drm:intel_crtc_init], swapping pipes & planes for FBC
> > [ 2.224512] [drm:intel_modeset_init], pipe A sprite A init failed: -19
> > [ 2.224524] [drm:intel_crtc_init], swapping pipes & planes for FBC
> > [ 2.224528] [drm:intel_modeset_init], pipe B sprite B init failed: -19
> > [ 2.224540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> > [ 2.225123] [drm] Skipping LVDS initialization for AOpen i915GMm-HFS
> > [ 2.228383] [drm:intel_setup_outputs], probing SDVOB
> > [ 2.228388] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
> > [ 2.301204] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
> > [ 2.313354] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 3C 06 01 01 01 01 00
> > [ 2.313362] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
> > vendor_id: 2
> > device_id: 60
> > device_rev_id: 6
> > sdvo_version_major: 1
> > sdvo_version_minor: 1
> > sdvo_inputs_mask: 1
> > smooth_scaling: 0
> > sharp_scaling: 0
> > up_scaling: 0
> > down_scaling: 0
> > stall_support: 0
> > output_flags: 1
> > [ 2.313376] [drm:intel_sdvo_dvi_init], initialising DVI device 0
> > [ 2.313383] [drm:intel_sdvo_debug_write], SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
> > [ 2.318730] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.318736] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
> > [ 2.322303] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
> > [ 2.325385] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
> > [ 2.325475] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
> > [ 2.329359] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 2.329365] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
> > [ 2.336975] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
> > [ 2.336980] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
> > [ 2.336985] [drm:intel_setup_outputs], probing SDVOC
> > [ 2.336992] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
> > [ 2.409700] [drm:intel_sdvo_debug_write], SDVOC: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
> > [ 2.421845] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C2 01 01 01 3D 3E 00
> > [ 2.421852] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
> > vendor_id: 2
> > device_id: 194
> > device_rev_id: 1
> > sdvo_version_major: 1
> > sdvo_version_minor: 1
> > sdvo_inputs_mask: 1
> > smooth_scaling: 1
> > sharp_scaling: 1
> > up_scaling: 1
> > down_scaling: 1
> > stall_support: 0
> > output_flags: 62
> > [ 2.421866] [drm:intel_sdvo_tv_init], initialising TV type 8
> > [ 2.421959] [drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00 (SDVO_CMD_SET_TARGET_OUTPUT)
> > [ 2.426662] [drm:intel_sdvo_read_response], SDVOC: R: (Success)
> > [ 2.426668] [drm:intel_sdvo_debug_write], SDVOC: W: 27 (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
> > [ 2.436547] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
> > [ 2.436581] [drm:intel_sdvo_debug_write], SDVOC: W: 84 (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
> > [ 2.441931] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
> > [ 2.441937] [drm:intel_sdvo_debug_write], SDVOC: W: 61 (SDVO_CMD_GET_MAX_OVERSCAN_H)
> > [ 2.449558] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
> > [ 2.449564] [drm:intel_sdvo_debug_write], SDVOC: W: 62 (SDVO_CMD_GET_OVERSCAN_H)
> > [ 2.454913] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
> > [ 2.454921] [drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
> > [ 2.454927] [drm:intel_sdvo_debug_write], SDVOC: W: 64 (SDVO_CMD_GET_MAX_OVERSCAN_V)
> > [ 2.462549] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
> > [ 2.462554] [drm:intel_sdvo_debug_write], SDVOC: W: 65 (SDVO_CMD_GET_OVERSCAN_V)
> > [ 2.467902] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
> > [ 2.467909] [drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
> > [ 2.467915] [drm:intel_sdvo_debug_write], SDVOC: W: 67 (SDVO_CMD_GET_MAX_HPOS)
> > [ 2.475537] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
> > [ 2.475543] [drm:intel_sdvo_debug_write], SDVOC: W: 68 (SDVO_CMD_GET_HPOS)
> > [ 2.480891] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
> > [ 2.480897] [drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
> > [ 2.480902] [drm:intel_sdvo_debug_write], SDVOC: W: 6A (SDVO_CMD_GET_MAX_VPOS)
> > [ 2.488523] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
> > [ 2.488529] [drm:intel_sdvo_debug_write], SDVOC: W: 6B (SDVO_CMD_GET_VPOS)
> > [ 2.493875] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
> > [ 2.493881] [drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
> > [ 2.493886] [drm:intel_sdvo_debug_write], SDVOC: W: 55 (SDVO_CMD_GET_MAX_SATURATION)
> > [ 2.501502] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
> > [ 2.501508] [drm:intel_sdvo_debug_write], SDVOC: W: 56 (SDVO_CMD_GET_SATURATION)
> > [ 2.506857] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
> > [ 2.506863] [drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
> > [ 2.506869] [drm:intel_sdvo_debug_write], SDVOC: W: 5E (SDVO_CMD_GET_MAX_CONTRAST)
> > [ 2.514491] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
> > [ 2.514497] [drm:intel_sdvo_debug_write], SDVOC: W: 5F (SDVO_CMD_GET_CONTRAST)
> > [ 2.519846] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
> > [ 2.519852] [drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
> > [ 2.519857] [drm:intel_sdvo_debug_write], SDVOC: W: 58 (SDVO_CMD_GET_MAX_HUE)
> > [ 2.527473] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
> > [ 2.527479] [drm:intel_sdvo_debug_write], SDVOC: W: 59 (SDVO_CMD_GET_HUE)
> > [ 2.532832] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
> > [ 2.532838] [drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
> > [ 2.532844] [drm:intel_sdvo_debug_write], SDVOC: W: 6D (SDVO_CMD_GET_MAX_SHARPNESS)
> > [ 2.540467] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
> > [ 2.540473] [drm:intel_sdvo_debug_write], SDVOC: W: 6E (SDVO_CMD_GET_SHARPNESS)
> > [ 2.545819] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
> > [ 2.545825] [drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
> > [ 2.545830] [drm:intel_sdvo_debug_write], SDVOC: W: 5B (SDVO_CMD_GET_MAX_BRIGHTNESS)
> > [ 2.553446] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
> > [ 2.553451] [drm:intel_sdvo_debug_write], SDVOC: W: 5C (SDVO_CMD_GET_BRIGHTNESS)
> > [ 2.558797] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
> > [ 2.558804] [drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
> > [ 2.558809] [drm:intel_sdvo_debug_write], SDVOC: W: 7B (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
> > [ 2.566432] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
> > [ 2.566438] [drm:intel_sdvo_debug_write], SDVOC: W: 50 (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
> > [ 2.571783] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
> > [ 2.571789] [drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
> > [ 2.571795] [drm:intel_sdvo_debug_write], SDVOC: W: 74 (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
> > [ 2.579413] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
> > [ 2.579418] [drm:intel_sdvo_debug_write], SDVOC: W: 75 (SDVO_CMD_GET_TV_CHROMA_FILTER)
> > [ 2.584769] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
> > [ 2.584775] [drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
> > [ 2.584781] [drm:intel_sdvo_debug_write], SDVOC: W: 77 (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
> > [ 2.592397] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 00 00
> > [ 2.592402] [drm:intel_sdvo_debug_write], SDVOC: W: 78 (SDVO_CMD_GET_TV_LUMA_FILTER)
> > [ 2.597751] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
> > [ 2.597757] [drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 0, current 0
> > [ 2.597763] [drm:intel_sdvo_debug_write], SDVOC: W: 70 (SDVO_CMD_GET_DOT_CRAWL)
> > [ 2.603112] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
> > [ 2.603118] [drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
> > [ 2.603121] [drm:intel_sdvo_tv_init], initialising TV type 4
> > [ 2.603235] ------------[ cut here ]------------
> > [ 2.603371] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x68/0x7a()
> > [ 2.603605] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/i2c-7/i2c-7'
> > [ 2.603841] Modules linked in:
> > [ 2.603992] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-main-01064-gd978ef1 #131
> > [ 2.604232] Hardware name: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
> > [ 2.604367] 00000000 f6079c64 f6079c3c c055593e f6079c54 c012a6a9 c022bc73 f6366000
> > [ 2.604781] f6366000 f6367200 f6079c6c c012a6eb 00000009 f6079c64 c06f0720 f6079c80
> > [ 2.605194] f6079c90 c022bc73 c06f06d0 000001e6 c06f0720 f6366000 f6367200 f6371c00
> > [ 2.605606] Call Trace:
> > [ 2.605736] [<c055593e>] dump_stack+0x16/0x18
> > [ 2.605871] [<c012a6a9>] warn_slowpath_common+0x5f/0x76
> > [ 2.606005] [<c022bc73>] ? sysfs_warn_dup+0x68/0x7a
> > [ 2.606139] [<c012a6eb>] warn_slowpath_fmt+0x2b/0x2f
> > [ 2.606273] [<c022bc73>] sysfs_warn_dup+0x68/0x7a
> > [ 2.606407] [<c022bcaa>] sysfs_add_one+0x25/0x2c
> > [ 2.606541] [<c022c567>] sysfs_do_create_link_sd.isra.2+0xc4/0x136
> > [ 2.606678] [<c022c5fd>] sysfs_create_link+0x24/0x2e
> > [ 2.606814] [<c0405e55>] intel_sdvo_connector_init+0x82/0xa2
> > [ 2.606950] [<c0407ad4>] intel_sdvo_tv_init+0x81/0x1cf
> > [ 2.607086] [<c0408a7b>] intel_sdvo_init+0x2ef/0x658
> > [ 2.607221] [<c039e331>] ? drm_ut_debug_printk+0x41/0x55
> > [ 2.607358] [<c03ed664>] intel_modeset_init+0xabd/0xdae
> > [ 2.607494] [<c055e27a>] ? preempt_count_sub+0xa8/0xb5
> > [ 2.607630] [<c055ae44>] ? _raw_spin_unlock_irqrestore+0x44/0x56
> > [ 2.607768] [<c03cfec6>] ? i915_irq_postinstall+0xee/0xf8
> > [ 2.607903] [<c039c688>] ? drm_irq_install+0x155/0x1b5
> > [ 2.608046] [<c03d0fbf>] ? i965_irq_handler+0x480/0x480
> > [ 2.608181] [<c040c7b4>] i915_driver_load+0xa53/0xcc3
> > [ 2.608318] [<c039e8cb>] drm_dev_register+0xb8/0x11b
> > [ 2.608452] [<c03a04d1>] drm_get_pci_dev+0xec/0x18a
> > [ 2.608587] [<c03acd4a>] i915_pci_probe+0x3e/0x47
> > [ 2.608722] [<c030d636>] pci_device_probe+0x5c/0xa4
> > [ 2.608857] [<c0419fce>] driver_probe_device+0x83/0x17a
> > [ 2.608991] [<c041a149>] __driver_attach+0x53/0x6f
> > [ 2.609127] [<c0418b32>] bus_for_each_dev+0x58/0x67
> > [ 2.609261] [<c0419bf2>] driver_attach+0x19/0x1b
> > [ 2.609394] [<c041a0f6>] ? __device_attach+0x31/0x31
> > [ 2.609528] [<c0419912>] bus_add_driver+0xd4/0x18b
> > [ 2.609661] [<c041a609>] driver_register+0x74/0xa9
> > [ 2.609795] [<c030ce6f>] __pci_register_driver+0x4a/0x4d
> > [ 2.609932] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
> > [ 2.610168] [<c03a05c5>] drm_pci_init+0x56/0xc9
> > [ 2.610302] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
> > [ 2.610538] [<c082321d>] i915_init+0x62/0x64
> > [ 2.610670] [<c01003e7>] do_one_initcall+0x7c/0x105
> > [ 2.610805] [<c07f9400>] ? do_early_param+0x3d/0x73
> > [ 2.610940] [<c0140cc6>] ? parse_args+0x16c/0x203
> > [ 2.611074] [<c07f9a4f>] kernel_init_freeable+0xdb/0x158
> > [ 2.611210] [<c054f9fe>] kernel_init+0xd/0xdf
> > [ 2.611344] [<c0560937>] ret_from_kernel_thread+0x1b/0x28
> > [ 2.611479] [<c054f9f1>] ? rest_init+0xa5/0xa5
> > [ 2.611666] ---[ end trace cd346fb3f5b5c52d ]---
> > [ 2.613964] [drm:intel_sdvo_init], SDVO output failed to setup on SDVOC
> > [ 2.614565] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
> > [ 2.614731] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
> > [ 2.614737] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: disabled
> > [ 2.614743] [drm:intel_modeset_readout_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe A
> > [ 2.614750] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.620297] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.620304] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.632814] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.632820] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.645339] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.645346] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.649684] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.649688] [drm:intel_modeset_readout_hw_state], [ENCODER:7:TMDS-7] hw state readout: enabled, pipe A
> > [ 2.649694] [drm:intel_modeset_readout_hw_state], [ENCODER:10:TV-10] hw state readout: disabled, pipe A
> > [ 2.649700] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
> > [ 2.649706] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.655201] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.655205] [drm:intel_modeset_readout_hw_state], [CONNECTOR:8:DVI-D-1] hw state readout: enabled
> > [ 2.655210] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:SVIDEO-1] hw state readout: disabled
> > [ 2.655213] [drm:intel_modeset_setup_hw_state], [CRTC:3] found active mode:
> > [ 2.655219] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
> > [ 2.655227] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
> > [ 2.655230] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 2.655234] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 2.655239] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655243] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655247] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.655252] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
> > [ 2.655255] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.655260] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
> > [ 2.655266] [drm:intel_dump_crtc_timings], crtc timings: 28320 720 765 873 900 400 412 414 449, type: 0x0 flags: 0x6
> > [ 2.655269] [drm:intel_dump_pipe_config], port clock: 113280
> > [ 2.655273] [drm:intel_dump_pipe_config], pipe src size: 720x400
> > [ 2.655277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.655281] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.655284] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.655288] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.655293] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
> > [ 2.655297] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 2.655300] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 2.655305] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655309] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655313] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.655318] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 2.655321] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.655326] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 2.655331] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
> > [ 2.655335] [drm:intel_dump_pipe_config], port clock: 0
> > [ 2.655338] [drm:intel_dump_pipe_config], pipe src size: 0x0
> > [ 2.655342] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.655346] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.655349] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.655353] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.655361] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.660867] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.660871] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 2.660877] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.666381] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.666386] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 2.666392] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 2.666398] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.671900] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.671904] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 2.671909] [drm:check_crtc_state], [CRTC:3]
> > [ 2.671925] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.677425] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.677431] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.689935] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.689941] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.702442] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.702449] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.706782] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.706787] [drm:check_crtc_state], [CRTC:4]
> > [ 2.706799] [drm:i9xx_get_plane_config], pipe/plane 0/1 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
> > [ 2.706804] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
> > [ 2.706879] [drm:i915_pages_create_for_stolen], offset=0x0, size=1282048
> > [ 2.706966] [drm:intel_alloc_plane_obj], plane fb obj f6373e40
> > [ 2.706972] [drm:i915_gem_setup_global_gtt], reserving preallocated space: 0 + 139000
> > [ 2.706976] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [139000, ffff000]
> > [ 2.709450] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
> > [ 2.709471] [drm:i915_pages_create_for_stolen], offset=0x139000, size=131072
> > [ 2.709884] [drm] initialized overlay support
> > [ 2.710017] [drm:intel_fbdev_init_bios], found possible fb from plane A
> > [ 2.710020] [drm:intel_fbdev_init_bios], pipe B not active or no fb, skipping
> > [ 2.710024] [drm:intel_fbdev_init_bios], checking plane A for BIOS fb
> > [ 2.710028] [drm:intel_fbdev_init_bios], pipe A area: 288000
> > [ 2.710031] [drm:intel_fbdev_init_bios], total size 1152000 (bpp 4)
> > [ 2.710035] [drm:intel_fbdev_init_bios], fb big enough for plane A (1282048 >= 1152000)
> > [ 2.710039] [drm:intel_fbdev_init_bios], pipe B not active, skipping
> > [ 2.710044] [drm:intel_fbdev_init_bios], using BIOS fb for initial console
> > [ 2.710054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
> > [ 2.710059] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
> > [ 2.712024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 2.712028] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.712032] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 2.712036] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 2.712368] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.712372] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 2.712375] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 2.712380] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
> > [ 2.712402] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
> > [ 2.712499] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> > [ 2.712505] [drm:connected_sink_compute_bpp], [CONNECTOR:5:VGA-1] checking for sink bpp constrains
> > [ 2.712533] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 2.712537] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
> > [ 2.712541] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 2.712544] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 2.712549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.712553] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.712557] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.712562] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
> > [ 2.712566] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.712571] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
> > [ 2.712577] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
> > [ 2.712580] [drm:intel_dump_pipe_config], port clock: 31500
> > [ 2.712584] [drm:intel_dump_pipe_config], pipe src size: 640x480
> > [ 2.712588] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.712592] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.712595] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.712599] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.714954] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 2560
> > [ 2.714960] [drm:intel_update_fbc], disabled per chip default
> > [ 2.714967] [drm:intel_crtc_mode_set], [ENCODER:6:DAC-6] set [MODE:0:640x480]
> > [ 2.715720] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 2.715725] [drm:intel_calculate_wm], FIFO entries required for mode: 10
> > [ 2.715728] [drm:intel_calculate_wm], FIFO watermark level: 16
> > [ 2.715733] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 2.715736] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 2.715739] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 2.715743] [drm:i9xx_update_wm], FIFO watermarks - A: 16, B: 20
> > [ 2.715748] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 16, B: 20, C: 2, SR 1
> > [ 2.715752] [drm:i9xx_update_wm], memory self refresh disabled
> > [ 2.736020] [drm:intel_update_fbc], more than one pipe active, disabling compression
> > [ 2.736030] [drm:intel_connector_check_state], [CONNECTOR:5:VGA-1]
> > [ 2.736037] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.741571] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.741575] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 2.741582] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.747093] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.747098] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 2.747104] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 2.747110] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.752626] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.752630] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 2.752635] [drm:check_crtc_state], [CRTC:3]
> > [ 2.752652] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.758158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.758164] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.770686] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.770692] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.783214] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.783220] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.787557] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.787561] [drm:check_crtc_state], [CRTC:4]
> > [ 2.804021] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 2.804025] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.804029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 2.804033] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 2.804374] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.804378] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 2.804382] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 2.804385] [drm:intel_crt_load_detect], starting load-detect on CRT
> > [ 2.812019] [drm:intel_release_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
> > [ 2.812024] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
> > [ 2.844985] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 2.844990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 2.844993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 2.844997] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 2.845000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
> > [ 2.845004] [drm:i9xx_update_wm], self-refresh entries: 45
> > [ 2.845009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
> > [ 2.845014] [drm:i9xx_update_wm], memory self refresh enabled
> > [ 2.845017] [drm:intel_update_fbc], disabled per chip default
> > [ 2.845031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.850537] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.850541] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 2.850548] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.856056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.856061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 2.856066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 2.856073] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.861589] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.861593] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 2.861597] [drm:check_crtc_state], [CRTC:3]
> > [ 2.861613] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.867118] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.867124] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.879645] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.879650] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.892173] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.892179] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.896517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.896521] [drm:check_crtc_state], [CRTC:4]
> > [ 2.896657] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
> > [ 2.896662] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1]
> > [ 2.896666] [drm:intel_sdvo_detect], [CONNECTOR:8:DVI-D-1]
> > [ 2.896672] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
> > [ 2.902454] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.902458] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
> > [ 2.902465] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.906363] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.943050] [drm:intel_sdvo_get_ddc_modes], [CONNECTOR:8:DVI-D-1]
> > [ 2.943057] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.946942] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.983605] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
> > [ 2.983626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1] probed modes :
> > [ 2.983633] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 2.983639] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> > [ 2.983645] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> > [ 2.983651] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> > [ 2.983657] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> > [ 2.983661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1]
> > [ 2.983665] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=1
> > [ 2.983670] [drm:intel_get_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
> > [ 2.983674] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
> > [ 2.983693] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> > [ 2.983699] [drm:connected_sink_compute_bpp], [CONNECTOR:9:SVIDEO-1] checking for sink bpp constrains
> > [ 2.983703] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
> > [ 2.983709] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 2.983713] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
> > [ 2.983716] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 2.983720] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 2.983724] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.983729] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.983732] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.983738] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
> > [ 2.983741] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.983747] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
> > [ 2.983752] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
> > [ 2.983756] [drm:intel_dump_pipe_config], port clock: 108000
> > [ 2.983760] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
> > [ 2.983764] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.983768] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.983771] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.983774] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.993290] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 5120
> > [ 2.993305] [drm:intel_crtc_mode_set], [ENCODER:10:TV-10] set [MODE:0:NTSC 480i]
> > [ 2.999122] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 2.999126] [drm:intel_calculate_wm], FIFO entries required for mode: 34
> > [ 2.999130] [drm:intel_calculate_wm], FIFO watermark level: -8
> > [ 2.999134] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 2.999138] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 2.999141] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 2.999145] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 20
> > [ 2.999150] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 20, C: 2, SR 1
> > [ 2.999154] [drm:i9xx_update_wm], memory self refresh disabled
> > [ 3.020020] [drm:intel_update_fbc], more than one pipe active, disabling compression
> > [ 3.020035] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.025549] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.025554] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 3.025560] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.031068] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.031073] [drm:intel_connector_check_state], [CONNECTOR:9:SVIDEO-1]
> > [ 3.031078] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 3.031084] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 3.031090] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.036595] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.036599] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 3.036603] [drm:check_crtc_state], [CRTC:3]
> > [ 3.036621] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.042131] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.042137] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 3.054659] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 3.054665] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 3.067186] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 3.067192] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 3.071529] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 3.071535] [drm:check_crtc_state], [CRTC:4]
> > [ 3.100115] tsc: Refined TSC clocksource calibration: 1862.713 MHz
> > [ 3.108021] [drm:intel_tv_detect_type], TV detected: 400c0c07, 7f0000aa
> > [ 3.108025] [drm:intel_tv_detect_type], Unrecognised TV connection
> > [ 3.140020] [drm:intel_release_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
> > [ 3.140026] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
> > [ 3.184984] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 3.184989] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 3.184993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 3.184996] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 3.185000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
> > [ 3.185004] [drm:i9xx_update_wm], self-refresh entries: 45
> > [ 3.185009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
> > [ 3.185013] [drm:i9xx_update_wm], memory self refresh enabled
> > [ 3.185017] [drm:intel_update_fbc], disabled per chip default
> > [ 3.185031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.190539] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.190544] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 3.190550] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.196056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.196061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 3.196066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 3.196072] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.201576] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.201580] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 3.201584] [drm:check_crtc_state], [CRTC:3]
> > [ 3.201600] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.207107] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.207113] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 3.219632] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 3.219638] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 3.232158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 3.232165] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 3.236510] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 3.236515] [drm:check_crtc_state], [CRTC:4]
> > [ 3.236626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1] disconnected
> > [ 3.236631] [drm:drm_setup_crtcs],
> > [ 3.236635] [drm:drm_enable_connectors], connector 5 enabled? no
> > [ 3.236639] [drm:drm_enable_connectors], connector 8 enabled? yes
> > [ 3.236643] [drm:drm_enable_connectors], connector 9 enabled? no
> > [ 3.236647] [drm:intel_fb_initial_config], connector 5 not enabled, skipping
> > [ 3.236651] [drm:intel_fb_initial_config], looking for cmdline mode on connector 8
> > [ 3.236655] [drm:intel_fb_initial_config], looking for preferred mode on connector 8
> > [ 3.236659] [drm:intel_fb_initial_config], connector DVI-D-1 on crtc 3: 1280x1024
> > [ 3.236663] [drm:intel_fb_initial_config], connector 9 not enabled, skipping
> > [ 3.236667] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
> > [ 3.236676] [drm:intelfb_create], re-using BIOS fb
> > [ 3.236892] [drm:intelfb_create], allocated 720x400 fb: 0x00000000, bo f6373e40
> > [ 3.237675] fbcon: inteldrmfb (fb0) is primary device
> > [ 3.241496] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.241501] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> > [ 3.241506] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
> > [ 3.241510] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 3.241512] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
> > [ 3.241515] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.241519] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> > [ 3.241523] [drm:connected_sink_compute_bpp], [CONNECTOR:8:DVI-D-1] checking for sink bpp constrains
> > [ 3.241526] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO
> > [ 3.241540] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 3.241542] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> > [ 3.241544] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 3.241546] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 3.241549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 3.241551] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 3.241553] [drm:intel_dump_pipe_config], requested mode:
> > [ 3.241557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 3.241559] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 3.241562] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 3.241566] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
> > [ 3.241568] [drm:intel_dump_pipe_config], port clock: 108000
> > [ 3.241570] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
> > [ 3.241572] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 3.241575] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 3.241576] [drm:intel_dump_pipe_config], ips: 0
> > [ 3.241578] [drm:intel_dump_pipe_config], double wide: 0
> > [ 3.241583] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
> > [ 3.246688] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.260987] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 3.260990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 3.260992] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
> > [ 3.260995] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
> > [ 3.260998] [drm:i9xx_update_wm], memory self refresh disabled
> > [ 3.260999] [drm:intel_update_fbc], no output, disabling
> > [ 3.261240] [drm:i9xx_update_plane], Writing base 00000000 00000000 0 0 3200
> > [ 3.261248] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024]
> > [ 3.261253] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
> > [ 3.268071] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.268075] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
> > [ 3.273147] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.273153] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
> > [ 3.283457] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.283462] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
> > [ 3.293770] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.293775] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
> > [ 3.297977] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.297982] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE)
> > [ 3.302181] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
> > [ 3.302187] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
> > [ 3.312503] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.312508] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
> > [ 3.322809] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.322814] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
> > [ 3.327010] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.327784] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 3.327787] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 3.327789] [drm:intel_calculate_wm], FIFO entries required for mode: 34
> > [ 3.327791] [drm:intel_calculate_wm], FIFO watermark level: -5
> > [ 3.327793] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
> > [ 3.327795] [drm:i9xx_update_wm], self-refresh entries: 80
> > [ 3.327798] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 15
> > [ 3.327802] [drm:i9xx_update_wm], memory self refresh enabled
> > [ 3.348019] [drm:intel_update_fbc], disabled per chip default
> > [ 3.380022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
> > [ 3.384583] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
> > [ 3.384587] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
> > [ 3.389658] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.389666] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.395449] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.395451] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 3.395456] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.401241] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.401245] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 3.401249] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 3.401254] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.407033] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.407036] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 3.407038] [drm:check_crtc_state], [CRTC:3]
> > [ 3.407056] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.412852] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.412857] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 3.426023] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 2A 00 98 51 00 2A 40
> > [ 3.426028] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 3.439507] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 70 13 00 1E 00 00 00
> > [ 3.439512] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 3.444085] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
> > [ 3.444087] [drm:check_crtc_state], [CRTC:4]
> > [ 3.444093] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
> > [ 3.444098] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
> > [ 3.444101] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.444129] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.444134] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 3.444136] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.446774] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.446779] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 3.446782] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.449753] Console: switching to colour frame buffer device 90x25
> > [ 3.449760] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.449765] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 3.449768] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.455199] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> > [ 3.456384] i915 0000:00:02.0: registered panic notifier
> > [ 3.457613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 3.459287] parport_pc 00:07: reported by Plug and Play ACPI
> > [ 3.460641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> > [ 3.560558] lp0: using parport0 (interrupt-driven).
> > [ 3.564759] loop: module loaded
> > [ 3.566136] ACPI Warning: 0x00004028-0x0000402f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
> > [ 3.568770] ACPI: This conflict may cause random problems and system instability
> > [ 3.570118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.572842] ACPI Warning: 0x000040b0-0x000040bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
> > [ 3.575761] ACPI: This conflict may cause random problems and system instability
> > [ 3.577297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.580449] ACPI Warning: 0x00004080-0x000040af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
> > [ 3.583752] ACPI: This conflict may cause random problems and system instability
> > [ 3.585482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.589035] Uniform Multi-Platform E-IDE driver
> > [ 3.590849] ide-gd driver 1.18
> > [ 3.592566] ide-cd driver 5.00
> > [ 3.594437] sata_sil24 0000:04:00.0: version 1.1
> > [ 3.595856] scsi0 : sata_sil24
> > [ 3.597881] scsi1 : sata_sil24
> > [ 3.599576] ata1: SATA max UDMA/100 host m128@0xd5184000 port 0xd5180000 irq 19
> > [ 3.601314] ata2: SATA max UDMA/100 host m128@0xd5184000 port 0xd5182000 irq 19
> > [ 3.603328] ata_piix 0000:00:1f.2: version 2.13
> > [ 3.603623] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> > [ 3.606198] scsi2 : ata_piix
> > [ 3.607871] scsi3 : ata_piix
> > [ 3.609448] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
> > [ 3.610913] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
> > [ 3.612450] sky2: driver version 1.30
> > [ 3.614005] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
> > [ 3.615426] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
> > [ 3.615990] sky2 0000:02:00.0 eth0: addr 00:01:80:62:25:4b
> > [ 3.617863] sky2 0000:03:00.0: Yukon-2 EC chip revision 1
> > [ 3.619183] sky2 0000:03:00.0: irq 45 for MSI/MSI-X
> > [ 3.619513] sky2 0000:03:00.0 eth1: addr 00:01:80:62:25:4c
> > [ 3.620830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 3.622055] ehci-pci: EHCI PCI platform driver
> > [ 3.623683] ehci-pci 0000:00:1d.7: EHCI Host Controller
> > [ 3.625075] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
> > [ 3.630227] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
> > [ 3.630292] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd5444000
> > [ 3.640021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> > [ 3.641536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> > [ 3.642578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.643620] usb usb1: Product: EHCI Host Controller
> > [ 3.644663] usb usb1: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 ehci_hcd
> > [ 3.645769] usb usb1: SerialNumber: 0000:00:1d.7
> > [ 3.647888] hub 1-0:1.0: USB hub found
> > [ 3.649147] hub 1-0:1.0: 8 ports detected
> > [ 3.651481] uhci_hcd: USB Universal Host Controller Interface driver
> > [ 3.653001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > [ 3.654178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> > [ 3.655367] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
> > [ 3.656724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.657917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.659136] usb usb2: Product: UHCI Host Controller
> > [ 3.660335] usb usb2: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.661564] usb usb2: SerialNumber: 0000:00:1d.0
> > [ 3.663098] hub 2-0:1.0: USB hub found
> > [ 3.664378] hub 2-0:1.0: 2 ports detected
> > [ 3.666229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > [ 3.667440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> > [ 3.668729] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
> > [ 3.670060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.671288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.672540] usb usb3: Product: UHCI Host Controller
> > [ 3.673782] usb usb3: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.675044] usb usb3: SerialNumber: 0000:00:1d.1
> > [ 3.676608] hub 3-0:1.0: USB hub found
> > [ 3.677842] hub 3-0:1.0: 2 ports detected
> > [ 3.679658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > [ 3.680864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> > [ 3.682124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
> > [ 3.683491] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.684736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.685978] usb usb4: Product: UHCI Host Controller
> > [ 3.687201] usb usb4: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.688460] usb usb4: SerialNumber: 0000:00:1d.2
> > [ 3.689990] hub 4-0:1.0: USB hub found
> > [ 3.691218] hub 4-0:1.0: 2 ports detected
> > [ 3.693001] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > [ 3.694192] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> > [ 3.695424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
> > [ 3.696739] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.697965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.699207] usb usb5: Product: UHCI Host Controller
> > [ 3.700441] usb usb5: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.701705] usb usb5: SerialNumber: 0000:00:1d.3
> > [ 3.703233] hub 5-0:1.0: USB hub found
> > [ 3.704490] hub 5-0:1.0: 2 ports detected
> > [ 3.706034] usbcore: registered new interface driver usblp
> > [ 3.707276] usbcore: registered new interface driver usb-storage
> > [ 3.708533] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> > [ 3.709709] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> > [ 3.713047] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 3.714994] mousedev: PS/2 mouse device common for all mice
> > [ 3.717248] input: PC Speaker as /devices/platform/pcspkr/input/input3
> > [ 3.718730] rtc_cmos 00:02: RTC can wake from S4
> > [ 3.720549] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> > [ 3.721854] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
> > [ 3.723487] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> > [ 3.724891] w83627hf: w83627hf: Found W83627THF chip at 0x290
> > [ 3.726201] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \SEN1 1 (20131115/utaddress-251)
> > [ 3.729640] ACPI: This conflict may cause random problems and system instability
> > [ 3.731040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.734295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> > [ 3.735750] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x4060)
> > [ 3.737604] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> > [ 3.739060] device-mapper: uevent: version 1.0.3
> > [ 3.740715] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
> > [ 3.743911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> > [ 3.747832] hidraw: raw HID events driver (C) Jiri Kosina
> > [ 3.750358] usbcore: registered new interface driver usbhid
> > [ 3.751951] usbhid: USB HID core driver
> > [ 3.753692] TCP: cubic registered
> > [ 3.755210] Initializing XFRM netlink socket
> > [ 3.757156] Using IPI Shortcut mode
> > [ 3.758914] registered taskstats version 1
> > [ 3.760845] AppArmor: AppArmor sha1 policy hashing enabled
> > [ 3.763285] rtc_cmos 00:02: setting system clock to 2014-04-22 13:43:01 UTC (1398174181)
> > [ 3.767393] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
> > [ 3.769169] PM: Checking hibernation image partition /dev/sda3
> > [ 3.776285] tsc: Marking TSC unstable due to cpufreq changes
> > [ 3.780763] ata4.00: ATAPI: AOpen DVRW2412PRO, 1.64, max UDMA/33
> > [ 3.800255] ata4.00: configured for UDMA/33
> > [ 3.804440] ata3.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
> > [ 3.807721] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> > [ 3.811214] ata3.01: ATA-7: HDT722525DLA380, V44OA91A, max UDMA/133
> > [ 3.814472] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> > [ 3.832368] ata3.00: configured for UDMA/133
> > [ 3.849099] ata3.01: configured for UDMA/133
> > [ 3.960127] usb 1-2: new high-speed USB device number 2 using ehci-pci
> > [ 4.103316] usb 1-2: New USB device found, idVendor=04b8, idProduct=011b
> > [ 4.106371] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 4.109373] usb 1-2: Product: EPSON Scanner
> > [ 4.111499] usb 1-2: Manufacturer: EPSON
> > [ 4.224106] usb 1-3: new high-speed USB device number 3 using ehci-pci
> > [ 4.356693] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
> > [ 4.359538] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> > [ 4.362453] usb 1-3: Product: USB 2.0 Hub
> > [ 4.366019] hub 1-3:1.0: USB hub found
> > [ 4.369046] hub 1-3:1.0: 4 ports detected
> > [ 4.868063] usb 5-2: new full-speed USB device number 2 using uhci_hcd
> > [ 5.055696] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
> > [ 5.058754] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 5.061636] usb 5-2: Product: USB Receiver
> > [ 5.064371] usb 5-2: Manufacturer: Logitech
> > [ 5.077307] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
> > [ 5.082613] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
> > [ 5.092226] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
> > [ 5.096306] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
> > [ 5.106935] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2
> > [ 5.308198] usb 1-3.4: new full-speed USB device number 5 using ehci-pci
> > [ 5.405819] usb 1-3.4: New USB device found, idVendor=03f0, idProduct=1d17
> > [ 5.409341] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [ 5.412910] usb 1-3.4: Product: hp LaserJet 1320 series
> > [ 5.416462] usb 1-3.4: Manufacturer: Hewlett-Packard
> > [ 5.417994] usb 1-3.4: SerialNumber: 00CNHW646GZH
> > [ 5.421067] usblp 1-3.4:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
> > [ 5.800070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> > [ 5.805665] ata1.00: ATA-8: KINGSTON SKC100S3120G, 501ABBF0, max UDMA/133
> > [ 5.809390] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
> > [ 5.815601] ata1.00: configured for UDMA/100
> > [ 5.834084] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC100S 501A PQ: 0 ANSI: 5
> > [ 5.843662] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
> > [ 5.848453] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 5.850657] sd 0:0:0:0: [sda] Write Protect is off
> > [ 5.852791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 5.852845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 5.857891] sda: sda1 sda2 sda3
> > [ 5.860857] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 7.932067] ata2: SATA link down (SStatus 0 SControl 0)
> > [ 7.948446] scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72201 JP4O PQ: 0 ANSI: 5
> > [ 7.955565] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> > [ 7.959313] sd 2:0:0:0: Attached scsi generic sg1 type 0
> > [ 7.962840] sd 2:0:0:0: [sdb] Write Protect is off
> > [ 7.966273] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > [ 7.966355] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 7.969460] scsi 2:0:1:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
> > [ 7.972841] sd 2:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
> > [ 7.974488] sd 2:0:1:0: [sdc] Write Protect is off
> > [ 7.975996] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
> > [ 7.976292] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 7.979883] sd 2:0:1:0: Attached scsi generic sg2 type 0
> > [ 7.982786] sdb: sdb1 sdb2 sdb3 sdb4
> > [ 7.984492] scsi 3:0:0:0: CD-ROM AOPEN DVRW2412PRO 1.64 PQ: 0 ANSI: 5
> > [ 7.988948] sd 2:0:0:0: [sdb] Attached SCSI disk
> > [ 7.991247] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > [ 7.992779] cdrom: Uniform CD-ROM driver Revision: 3.20
> > [ 7.994996] sr 3:0:0:0: Attached scsi CD-ROM sr0
> > [ 7.995175] sr 3:0:0:0: Attached scsi generic sg3 type 5
> > [ 8.058214] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
> > [ 8.064585] sd 2:0:1:0: [sdc] Attached SCSI disk
> > [ 8.067998] PM: Hibernation image partition 8:3 present
> > [ 8.068035] PM: Looking for hibernation image.
> > [ 8.071701] PM: Image not found (code -22)
> > [ 8.071711] PM: Hibernation image not present or could not be loaded.
> > [ 8.072512] Freeing unused kernel memory: 500K (c07f9000 - c0876000)
> > [ 8.074558] Write protecting the kernel text: 4488k
> > [ 8.076665] Write protecting the kernel read-only data: 2256k
> > [ 8.078335] NX-protecting the kernel data: 4728k
> > [ 8.196506] systemd-udevd[90]: starting version 208
> > [ 8.817893] random: nonblocking pool is initialized
> > [ 9.587815] platform microcode: Direct firmware load failed with error -2
> > [ 9.591670] platform microcode: Falling back to user helper
> > [ 13.472325] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
> > [ 13.476038] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 13.476045] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 13.476049] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 13.476054] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 13.476395] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 13.476399] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 13.476403] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 13.476478] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
> > [ 14.778136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> > [ 14.826261] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
> > [ 15.029583] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
> > [ 15.118801] NET: Registered protocol family 10
> > [ 15.124315] systemd[1]: Inserted module 'ipv6'
> > [ 15.126644] systemd[1]: Set hostname to <golem>.
> > [ 15.183033] LVM: Logical Volume autoactivation enabled.
> > [ 15.185303] LVM: Activation generator successfully completed.
> > [ 15.311540] systemd[1]: Starting Remote File Systems (Pre).
> > [ 15.316221] systemd[1]: Reached target Remote File Systems (Pre).
> > [ 15.317953] systemd[1]: Starting Remote File Systems.
> > [ 15.321672] systemd[1]: Reached target Remote File Systems.
> > [ 15.323419] systemd[1]: Starting Syslog Socket.
> > [ 15.327122] systemd[1]: Listening on Syslog Socket.
> > [ 15.328820] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
> > [ 15.331851] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
> > [ 15.333287] systemd[1]: Starting Delayed Shutdown Socket.
> > [ 15.336210] systemd[1]: Listening on Delayed Shutdown Socket.
> > [ 15.337533] systemd[1]: Starting LVM2 metadata daemon socket.
> > [ 15.340369] systemd[1]: Listening on LVM2 metadata daemon socket.
> > [ 15.341702] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
> > [ 15.343342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> > [ 15.344736] systemd[1]: Starting Paths.
> > [ 15.347608] systemd[1]: Reached target Paths.
> > [ 15.349096] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
> > [ 15.354344] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> > [ 15.357277] systemd[1]: Starting Encrypted Volumes.
> > [ 15.360435] systemd[1]: Reached target Encrypted Volumes.
> > [ 15.361957] systemd[1]: Starting Journal Socket.
> > [ 15.365335] systemd[1]: Listening on Journal Socket.
> > [ 15.366865] systemd[1]: Mounting POSIX Message Queue File System...
> > [ 15.375572] systemd[1]: Starting Load Kernel Modules...
> > [ 15.382417] systemd[1]: Starting Create list of required static device nodes for the current kernel...
> > [ 15.402740] systemd[1]: Started Set Up Additional Binary Formats.
> > [ 15.405020] systemd[1]: Starting Setup Virtual Console...
> > [ 15.413643] systemd[1]: Starting Create dynamic rule for /dev/root link...
> > [ 15.424935] systemd[1]: Starting LSB: Set default boot entry if called...
> > [ 15.432288] systemd[1]: Starting Journal Service...
> > [ 15.463472] systemd[1]: Started Journal Service.
> > [ 15.498137] systemd-journald[202]: Vacuuming done, freed 0 bytes
> > [ 15.569620] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 15.569627] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 15.569631] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 15.621781] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
> > [ 15.909733] systemd-udevd[241]: starting version 208
> > [ 16.379683] Linux video capture interface: v2.00
> > [ 16.521180] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
> > [ 16.542699] WARNING! power/level is deprecated; use power/control instead
> > [ 16.733638] Adding 7119316k swap on /dev/sda3. Priority:-1 extents:1 across:7119316k SS
> > [ 17.074286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> > [ 17.139216] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=3 (0x14/0x17/0x16/0x0/0x0) type:line
> > [ 17.139224] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> > [ 17.139229] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
> > [ 17.139233] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
> > [ 17.139237] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0
> > [ 17.139240] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
> > [ 17.139244] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
> > [ 17.139248] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x1b
> > [ 17.139252] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
> > [ 17.139257] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
> > [ 17.139261] ALSA sound/pci/hda/patch_realtek.c:572 realtek: Enable default setup for auto mode as fallback
> > [ 17.162783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
> > [ 17.222696] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > [ 17.236290] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > [ 17.255391] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> > [ 17.261287] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> > [ 17.274087] tveeprom 8-0050: Hauppauge model 69100, rev B4C3, serial# 7900937
> > [ 17.292122] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> > [ 17.303670] tveeprom 8-0050: MAC address is 00:0d:fe:78:8f:09
> > [ 17.315320] tveeprom 8-0050: tuner model is Conexant CX24118A (idx 123, type 4)
> > [ 17.321311] tveeprom 8-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> > [ 17.329373] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> > [ 17.335654] tveeprom 8-0050: audio processor is None (idx 0)
> > [ 17.347089] tveeprom 8-0050: decoder processor is CX880 (idx 20)
> > [ 17.357408] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
> > [ 17.367460] cx88[0]: hauppauge eeprom: model=69100
> > [ 17.416091] Registered IR keymap rc-hauppauge
> > [ 17.418847] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0/input13
> > [ 17.431663] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0
> > [ 17.449327] IR RC5(x) protocol handler initialized
> > [ 17.454480] cx88[0]/2: cx2388x 8802 Driver Manager
> > [ 17.457159] cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 17, latency: 32, mmio: 0xd2000000
> > [ 17.461726] lirc_dev: IR Remote Control driver registered, major 250
> > [ 17.466631] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
> > [ 17.472116] IR LIRC bridge handler initialized
> > [ 17.482251] cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 17, latency: 32, mmio: 0xd0000000
> > [ 17.487398] cx88[0]/0: registered device video0 [v4l2]
> > [ 17.497932] cx88[0]/0: registered device vbi0
> > [ 17.509908] cx88/2: cx2388x dvb driver version 0.0.9 loaded
> > [ 17.511501] cx88/2: registering cx8802 driver, type: dvb access: shared
> > [ 17.514289] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
> > [ 17.521114] cx88[0]/2: cx2388x based DVB/ATSC card
> > [ 17.524146] cx8802_alloc_frontends() allocating 1 frontend(s)
> > [ 17.552650] DVB: registering new adapter (cx88[0])
> > [ 17.554415] cx88-mpeg driver manager 0000:05:05.2: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
> > [ 17.767120] REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
> > [ 17.769248] REISERFS (device sdb4): using ordered data mode
> > [ 17.770792] reiserfs: using flush barriers
> > [ 17.782609] REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> > [ 17.787278] REISERFS (device sdb4): checking transaction log (sdb4)
> > [ 17.892494] REISERFS (device sdb4): Using r5 hash to sort names
> > [ 17.917237] usblp0: removed
> > [ 18.063161] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> > [ 18.112358] systemd-journald[202]: Received request to flush runtime journal from PID 1
> > [ 18.898204] ip6_tables: (C) 2000-2006 Netfilter Core Team
> > [ 19.019782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 19.048657] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 21.004540] sky2 0000:02:00.0 eth0: enabling interface
> > [ 21.004816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [ 21.171576] NET: Registered protocol family 17
> > [ 22.799130] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
> > [ 22.799313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > [ 23.488060] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
> > [ 23.492456] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 23.492470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 23.492479] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 23.492489] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 23.492967] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 23.492978] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 23.492986] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 23.493001] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
>

Attachment: signature.asc
Description: This is a digitally signed message part

Next message: Sam Ravnborg: "Re: [PATCH 06/28] nios2: Memory management"
Previous message: Alexandre Belloni: "Re: [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031"
In reply to: Ville Syrjälä: "Re: [Intel-gfx] [PATCH] drm/i915: Discard BIOS framebuffers too small to accommodate chosen mode"
Next in thread: Daniel Vetter: "Re: [Intel-gfx] [Bug 3.15-rc2] [bisected] intel framebuffer broken"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]