Re: [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031
From: Hubert Chaumette
Date: Wed Apr 23 2014 - 03:36:41 EST
Le mardi 22 avril 2014 Ã 09:10 -0700, Florian Fainelli a Ãcrit :
> 2014-04-22 8:49 GMT-07:00 Hubert Chaumette <hchaumette@xxxxxxxxxxxxxxxxxxx>:
> > Adds support for ksz9031 PAD skew configuration over devicetree.
> >
> > Changes since v1:
> > - Removed ksz9021 and ksz9031 fixup deletions from arch/arm/mach-imx/mach-imx6q.c
>
> You should probably update the existing binding document in
> Documentation/devicetree/bindings/net/micrel-ksz9021.txt to cover the
> KSZ9031 PHY too.
Should it be renamed in the process (micrel-ksz90x1.txt) ?
> >
> > Signed-off-by: Hubert Chaumette <hchaumette@xxxxxxxxxxxxxxxxxxx>
> > ---
> > drivers/net/phy/micrel.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 184 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> > index 5a8993b..df56b26 100644
> > --- a/drivers/net/phy/micrel.c
> > +++ b/drivers/net/phy/micrel.c
> > @@ -242,6 +242,189 @@ static int ksz9021_config_init(struct phy_device *phydev)
> > return 0;
> > }
> >
> > +#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
> > +#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
> > +#define OP_DATA 1
> > +#define KSZ9031_PS_TO_REG 60
> > +
> > +/* Extended registers */
> > +#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
> > +#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
> > +#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
> > +#define MII_KSZ9031RN_CLK_PAD_SKEW 8
> > +
> > +static int ksz9031_extended_write(struct phy_device *phydev,
> > + u8 mode, u32 dev_addr, u32 regnum, u16 val)
> > +{
> > + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
> > + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
> > + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
> > + return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
> > +}
> > +
> > +static int ksz9031_extended_read(struct phy_device *phydev,
> > + u8 mode, u32 dev_addr, u32 regnum)
> > +{
> > + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
> > + phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
> > + phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
> > + return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
> > +}
> > +
> > +/* Two 5-bit fields register */
> > +static int ksz9031_load_clk_skew_values(struct phy_device *phydev,
> > + struct device_node *of_node,
> > + char *field1, char *field2)
> > +{
> > + int val1 = -1;
> > + int val2 = -2;
> > + int newval;
> > + int matches = 0;
> > +
> > + if (!of_property_read_u32(of_node, field1, &val1))
> > + matches++;
> > +
> > + if (!of_property_read_u32(of_node, field2, &val2))
> > + matches++;
> > +
> > + if (!matches)
> > + return 0;
> > +
> > + if (matches < 2)
> > + newval = ksz9031_extended_read(phydev, OP_DATA, 2,
> > + MII_KSZ9031RN_CLK_PAD_SKEW);
> > + else
> > + newval = 0;
> > +
> > + if (val1 != -1)
> > + newval = (newval & 0xffe0) |
> > + ((val1 / KSZ9031_PS_TO_REG) & 0x1f);
> > +
> > + if (val2 != -2)
> > + newval = (newval & 0xfc1f) |
> > + (((val2 / KSZ9031_PS_TO_REG) & 0x1f) << 5);
> > +
> > + return ksz9031_extended_write(phydev, OP_DATA, 2,
> > + MII_KSZ9031RN_CLK_PAD_SKEW, newval);
> > +}
> > +
> > +/* Four 4-bit fields register */
> > +static int ksz9031_load_data_skew_values(struct phy_device *phydev,
> > + struct device_node *of_node, u16 reg,
> > + char *field1, char *field2,
> > + char *field3, char *field4)
> > +{
> > + int val1 = -1;
> > + int val2 = -2;
> > + int val3 = -3;
> > + int val4 = -4;
> > + int newval;
> > + int matches = 0;
> > +
> > + if (!of_property_read_u32(of_node, field1, &val1))
> > + matches++;
> > +
> > + if (!of_property_read_u32(of_node, field2, &val2))
> > + matches++;
> > +
> > + if (!of_property_read_u32(of_node, field3, &val3))
> > + matches++;
> > +
> > + if (!of_property_read_u32(of_node, field4, &val4))
> > + matches++;
> > +
> > + if (!matches)
> > + return 0;
> > +
> > + if (matches < 4)
> > + newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
> > + else
> > + newval = 0;
> > +
> > + if (val1 != -1)
> > + newval = (newval & 0xfff0) |
> > + (((val1 / KSZ9031_PS_TO_REG) & 0xf) << 0);
> > +
> > + if (val2 != -2)
> > + newval = (newval & 0xff0f) |
> > + (((val2 / KSZ9031_PS_TO_REG) & 0xf) << 4);
> > +
> > + if (val3 != -3)
> > + newval = (newval & 0xf0ff) |
> > + (((val3 / KSZ9031_PS_TO_REG) & 0xf) << 8);
> > +
> > + if (val4 != -4)
> > + newval = (newval & 0x0fff) |
> > + (((val4 / KSZ9031_PS_TO_REG) & 0xf) << 12);
>
> How about something like this:
>
> for (i = 0; i < 4; i++) {
> if (val[i] != -i) {
> mask = 0xffff;
> mask <<= (0 << (i * 4));
> newval = (newval & mask) |
> (((val[i] / KSZ9031_PS_TO_REG) & 0xf) << (i *4);
> }
> }
>
> Such that you could factor ksz9031_load_ctrl_skew_values() and
> ksz9031_load_data_skew_values() to specify the number of matches they
> should have?
I'm on it.
We could go further along this path and add a field length parameter to
also factor ksz9031_load_clk_skew_values()?
A similar loop could be used in ksz9021_load_values_from_of().
> > +
> > + return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
> > +}
> > +
> > +/* Two 4-bit fields register */
> > +static int ksz9031_load_ctrl_skew_values(struct phy_device *phydev,
> > + struct device_node *of_node,
> > + char *field1, char *field2)
> > +{
> > + int val1 = -1;
> > + int val2 = -2;
> > + int newval;
> > + int matches = 0;
> > +
> > + if (!of_property_read_u32(of_node, field1, &val1))
> > + matches++;
> > +
> > + if (!of_property_read_u32(of_node, field2, &val2))
> > + matches++;
> > +
> > + if (!matches)
> > + return 0;
> > +
> > + if (matches < 2)
> > + newval = ksz9031_extended_read(phydev, OP_DATA, 2,
> > + MII_KSZ9031RN_CONTROL_PAD_SKEW);
> > + else
> > + newval = 0;
> > +
> > + if (val1 != -1)
> > + newval = (newval & 0xfff0) |
> > + (((val1 / KSZ9031_PS_TO_REG) & 0xf) << 0);
> > +
> > + if (val2 != -2)
> > + newval = (newval & 0xff0f) |
> > + (((val2 / KSZ9031_PS_TO_REG) & 0xf) << 4);
> > +
> > + return ksz9031_extended_write(phydev, OP_DATA, 2,
> > + MII_KSZ9031RN_CONTROL_PAD_SKEW, newval);
> > +}
> > +
> > +static int ksz9031_config_init(struct phy_device *phydev)
> > +{
> > + struct device *dev = &phydev->dev;
> > + struct device_node *of_node = dev->of_node;
> > +
> > + if (!of_node && dev->parent->of_node)
> > + of_node = dev->parent->of_node;
> > +
> > + if (of_node) {
> > + ksz9031_load_clk_skew_values(phydev, of_node,
> > + "rxc-skew-ps", "txc-skew-ps");
> > +
> > + ksz9031_load_data_skew_values(phydev, of_node,
> > + MII_KSZ9031RN_RX_DATA_PAD_SKEW,
> > + "rxd0-skew-ps", "rxd1-skew-ps",
> > + "rxd2-skew-ps", "rxd3-skew-ps");
> > +
> > + ksz9031_load_data_skew_values(phydev, of_node,
> > + MII_KSZ9031RN_TX_DATA_PAD_SKEW,
> > + "txd0-skew-ps", "txd1-skew-ps",
> > + "txd2-skew-ps", "txd3-skew-ps");
> > +
> > + ksz9031_load_ctrl_skew_values(phydev, of_node,
> > + "txen-skew-ps", "rxdv-skew-ps");
> > + }
> > + return 0;
> > +}
> > +
> > #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
> > #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
> > #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
> > @@ -428,7 +611,7 @@ static struct phy_driver ksphy_driver[] = {
> > .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
> > | SUPPORTED_Asym_Pause),
> > .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
> > - .config_init = kszphy_config_init,
> > + .config_init = ksz9031_config_init,
> > .config_aneg = genphy_config_aneg,
> > .read_status = genphy_read_status,
> > .ack_interrupt = kszphy_ack_interrupt,
> > --
> > 1.9.2
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/