Re: [PATCH 2/4] mfd: bcm590xx: add support for second i2c slave address space

[Matt Porter]

On Wed, Apr 23, 2014 at 06:01:26PM -0400, Matt Porter wrote:
> On Tue, Apr 22, 2014 at 09:21:39AM +0100, Lee Jones wrote:
> > > > > > s/regmap/Regmap
> > > > > 
> > > > > It's consistently written regmap in all the documentation and so on :)
> > > > 
> > > > Furry muff; but the comments still stand for the acronyms.
> > > > 
> > > > > > addmap{0,1} doesn't quite sit right with me.
> > > > > 
> > > > > > REVISIT: Ah, it's address-map, rather than add map. Okay, not as bad
> > > > > > as I first thought, but still, is there a better naming convention you
> > > > > > could use?
> > > > > 
> > > > > addrmap or something?
> > > > 
> > > > Right, that was what I was thinking. However, I prefer something along
> > > > the lines of 'i2c' and 'i2c_sec' or 'client' and 'client_slv' etc.
> > > 
> > > FWIW, the reason it's addmap{0,1} is that the datasheet has documents
> > > ADDMAP=0 and the first bank of registers and ADDMAP=1 as the second bank
> > > of registers. I adopted that to match the docs for the part.
> > > 
> > > I guess we could do i2c and i2c_sec, I'll just have to put a comment
> > > correlating it to the h/w. Calling it 'slv' implies something else
> > > so we should avoid that here. The notion of a "secondary" i2c device
> > > is completely a Linux I2C subsystem fabrication which wouldn't exist
> > > if it allowed multiple slave addresses per device. From a h/w
> > > perspective there is really no primary and secondary relationship.
> > > 
> > > I'm fine with i2c/i2c_sec or addrmap0/1 and I will just comment to
> > > correlate with the datasheet..pick one.
> > 
> > Let's stick method fabricated by the I2C subsystem. It may seem strange
> > from a h/w perspective, but it is the way we (you) have coded it, as
> > the first parameter of i2c_new_dummy() is the 'managing' (primary,
> > parent, master, whatever) device, so '_sec' would suit as an
> > identifying appendage for the resultant device.
> 
> That works, I'll also switch to addrmap_[pri|sec] which touches the
> regulator driver as well. That will keep the relationship  between device
> and regmap clear.

Misspoke...I'm switching regmap[0|1] to regmap_[pri|sec] to keep that
synced with i2c_[pri|sec]

-Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/