Re: [PATCH] thermal: samsung: Only update available threshold limits

[Tushar Behera]

On 04/14/2014 11:08 AM, Tushar Behera wrote:
> Currently the threshold limits are updated in 2 stages, once for all
> software trigger levels and again for hardware trip point.
> 
> While updating the software trigger levels, it overwrites the threshold
> limit for hardware trip point thereby forcing the Exynos core to issue
> an emergency shutdown.
> 
> Updating only the required fields in threshold register fixes this issue.
> 
> Signed-off-by: Tushar Behera <tushar.behera@xxxxxxxxxx>
> ---
> Based on v3.15-rc1.
> 
>  drivers/thermal/samsung/exynos_tmu.c |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 0d96a51..ffccc89 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -225,6 +225,8 @@ skip_calib_data:
>  			trigger_levs++;
>  	}
>  
> +	rising_threshold = readl(data->base + reg->threshold_th0);
> +
>  	if (data->soc == SOC_ARCH_EXYNOS4210) {
>  		/* Write temperature code for threshold */
>  		threshold_code = temp_to_code(data, pdata->threshold);
> @@ -249,6 +251,7 @@ skip_calib_data:
>  				ret = threshold_code;
>  				goto out;
>  			}
> +			rising_threshold &= ~(0xff << 8 * i);
>  			rising_threshold |= threshold_code << 8 * i;
>  			if (pdata->threshold_falling) {
>  				threshold_code = temp_to_code(data,
> @@ -281,6 +284,7 @@ skip_calib_data:
>  			}
>  			if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
>  				/* 1-4 level to be assigned in th0 reg */
> +				rising_threshold &= ~(0xff << 8 * i);
>  				rising_threshold |= threshold_code << 8 * i;
>  				writel(rising_threshold,
>  					data->base + reg->threshold_th0);
> 

Adding Amit to get Samsung specific review.

-- 
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/