Re: [PATCHv6 1/3] mfd: sec-core: Add support for S2MPU02 device

From: Lee Jones
Date: Wed Jun 18 2014 - 05:13:48 EST

Next message: Lee Jones: "Re: [PATCHv6 2/3] regulator: s2mps11: Add support S2MPU02 regulator device"
Previous message: Varka Bhadram: "Re: [PATCH net-next v2 3/3] devicetree: add devicetree bindings for cc2520 driver"
In reply to: Lee Jones: "Re: [PATCHv6 1/3] mfd: sec-core: Add support for S2MPU02 device"
Next in thread: Chanwoo Choi: "[PATCHv6 2/3] regulator: s2mps11: Add support S2MPU02 regulator device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 18 Jun 2014, Lee Jones wrote:

> > Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver.
> > The S2MPU02 device includes PMIC/RTC/Clock devices.
> >
> > Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> > ---
> > drivers/mfd/sec-core.c | 46 +++++++++++-----
> > drivers/mfd/sec-irq.c | 110 +++++++++++++++++++++++++++++++++------
> > include/linux/mfd/samsung/core.h | 1 +
> > include/linux/mfd/samsung/irq.h | 24 +++++++++
> > 4 files changed, 151 insertions(+), 30 deletions(-)
>
> Looks good now:
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>
> Can I just apply this on its own?

Ignore this - you answered it on the previous version.

I'm going to apply this patch.

> > diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> > index be06d0a..15ba847 100644
> > --- a/drivers/mfd/sec-core.c
> > +++ b/drivers/mfd/sec-core.c
> > @@ -89,6 +89,15 @@ static const struct mfd_cell s2mpa01_devs[] = {
> > },
> > };
> >
> > +static const struct mfd_cell s2mpu02_devs[] = {
> > + { .name = "s2mpu02-pmic", },
> > + { .name = "s2mpu02-rtc", },
> > + {
> > + .name = "s2mpu02-clk",
> > + .of_compatible = "samsung,s2mpu02-clk",
> > + }
> > +};
> > +
> > #ifdef CONFIG_OF
> > static const struct of_device_id sec_dt_match[] = {
> > { .compatible = "samsung,s5m8767-pmic",
> > @@ -103,6 +112,9 @@ static const struct of_device_id sec_dt_match[] = {
> > .compatible = "samsung,s2mpa01-pmic",
> > .data = (void *)S2MPA01,
> > }, {
> > + .compatible = "samsung,s2mpu02-pmic",
> > + .data = (void *)S2MPU02,
> > + }, {
> > /* Sentinel */
> > },
> > };
> > @@ -250,9 +262,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
> > {
> > struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
> > const struct regmap_config *regmap;
> > + const struct mfd_cell *sec_devs;
> > struct sec_pmic_dev *sec_pmic;
> > unsigned long device_type;
> > - int ret;
> > + int ret, num_sec_devs;
> >
> > sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
> > GFP_KERNEL);
> > @@ -319,34 +332,39 @@ static int sec_pmic_probe(struct i2c_client *i2c,
> >
> > switch (sec_pmic->device_type) {
> > case S5M8751X:
> > - ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
> > - ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
> > + sec_devs = s5m8751_devs;
> > + num_sec_devs = ARRAY_SIZE(s5m8751_devs);
> > break;
> > case S5M8763X:
> > - ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
> > - ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
> > + sec_devs = s5m8763_devs;
> > + num_sec_devs = ARRAY_SIZE(s5m8763_devs);
> > break;
> > case S5M8767X:
> > - ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
> > - ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
> > + sec_devs = s5m8767_devs;
> > + num_sec_devs = ARRAY_SIZE(s5m8767_devs);
> > break;
> > case S2MPA01:
> > - ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
> > - ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
> > + sec_devs = s2mpa01_devs;
> > + num_sec_devs = ARRAY_SIZE(s2mpa01_devs);
> > break;
> > case S2MPS11X:
> > - ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
> > - ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
> > + sec_devs = s2mps11_devs;
> > + num_sec_devs = ARRAY_SIZE(s2mps11_devs);
> > break;
> > case S2MPS14X:
> > - ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
> > - ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
> > + sec_devs = s2mps14_devs;
> > + num_sec_devs = ARRAY_SIZE(s2mps14_devs);
> > + break;
> > + case S2MPU02:
> > + sec_devs = s2mpu02_devs;
> > + num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
> > break;
> > default:
> > /* If this happens the probe function is problem */
> > BUG();
> > }
> > -
> > + ret = mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs, NULL,
> > + 0, NULL);
> > if (ret)
> > goto err_mfd;
> >
> > diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> > index 654e2c1..f9a5786 100644
> > --- a/drivers/mfd/sec-irq.c
> > +++ b/drivers/mfd/sec-irq.c
> > @@ -20,6 +20,7 @@
> > #include <linux/mfd/samsung/irq.h>
> > #include <linux/mfd/samsung/s2mps11.h>
> > #include <linux/mfd/samsung/s2mps14.h>
> > +#include <linux/mfd/samsung/s2mpu02.h>
> > #include <linux/mfd/samsung/s5m8763.h>
> > #include <linux/mfd/samsung/s5m8767.h>
> >
> > @@ -161,6 +162,77 @@ static const struct regmap_irq s2mps14_irqs[] = {
> > },
> > };
> >
> > +static const struct regmap_irq s2mpu02_irqs[] = {
> > + [S2MPU02_IRQ_PWRONF] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_PWRONF_MASK,
> > + },
> > + [S2MPU02_IRQ_PWRONR] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_PWRONR_MASK,
> > + },
> > + [S2MPU02_IRQ_JIGONBF] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_JIGONBF_MASK,
> > + },
> > + [S2MPU02_IRQ_JIGONBR] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_JIGONBR_MASK,
> > + },
> > + [S2MPU02_IRQ_ACOKBF] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_ACOKBF_MASK,
> > + },
> > + [S2MPU02_IRQ_ACOKBR] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_ACOKBR_MASK,
> > + },
> > + [S2MPU02_IRQ_PWRON1S] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_PWRON1S_MASK,
> > + },
> > + [S2MPU02_IRQ_MRB] = {
> > + .reg_offset = 0,
> > + .mask = S2MPS11_IRQ_MRB_MASK,
> > + },
> > + [S2MPU02_IRQ_RTC60S] = {
> > + .reg_offset = 1,
> > + .mask = S2MPS11_IRQ_RTC60S_MASK,
> > + },
> > + [S2MPU02_IRQ_RTCA1] = {
> > + .reg_offset = 1,
> > + .mask = S2MPS11_IRQ_RTCA1_MASK,
> > + },
> > + [S2MPU02_IRQ_RTCA0] = {
> > + .reg_offset = 1,
> > + .mask = S2MPS11_IRQ_RTCA0_MASK,
> > + },
> > + [S2MPU02_IRQ_SMPL] = {
> > + .reg_offset = 1,
> > + .mask = S2MPS11_IRQ_SMPL_MASK,
> > + },
> > + [S2MPU02_IRQ_RTC1S] = {
> > + .reg_offset = 1,
> > + .mask = S2MPS11_IRQ_RTC1S_MASK,
> > + },
> > + [S2MPU02_IRQ_WTSR] = {
> > + .reg_offset = 1,
> > + .mask = S2MPS11_IRQ_WTSR_MASK,
> > + },
> > + [S2MPU02_IRQ_INT120C] = {
> > + .reg_offset = 2,
> > + .mask = S2MPS11_IRQ_INT120C_MASK,
> > + },
> > + [S2MPU02_IRQ_INT140C] = {
> > + .reg_offset = 2,
> > + .mask = S2MPS11_IRQ_INT140C_MASK,
> > + },
> > + [S2MPU02_IRQ_TSD] = {
> > + .reg_offset = 2,
> > + .mask = S2MPS14_IRQ_TSD_MASK,
> > + },
> > +};
> > +
> > static const struct regmap_irq s5m8767_irqs[] = {
> > [S5M8767_IRQ_PWRR] = {
> > .reg_offset = 0,
> > @@ -327,6 +399,16 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
> > .ack_base = S2MPS14_REG_INT1,
> > };
> >
> > +static const struct regmap_irq_chip s2mpu02_irq_chip = {
> > + .name = "s2mpu02",
> > + .irqs = s2mpu02_irqs,
> > + .num_irqs = ARRAY_SIZE(s2mpu02_irqs),
> > + .num_regs = 3,
> > + .status_base = S2MPU02_REG_INT1,
> > + .mask_base = S2MPU02_REG_INT1M,
> > + .ack_base = S2MPU02_REG_INT1,
> > +};
> > +
> > static const struct regmap_irq_chip s5m8767_irq_chip = {
> > .name = "s5m8767",
> > .irqs = s5m8767_irqs,
> > @@ -351,6 +433,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> > {
> > int ret = 0;
> > int type = sec_pmic->device_type;
> > + const struct regmap_irq_chip *sec_irq_chip;
> >
> > if (!sec_pmic->irq) {
> > dev_warn(sec_pmic->dev,
> > @@ -361,28 +444,19 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> >
> > switch (type) {
> > case S5M8763X:
> > - ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > - sec_pmic->irq_base, &s5m8763_irq_chip,
> > - &sec_pmic->irq_data);
> > + sec_irq_chip = &s5m8763_irq_chip;
> > break;
> > case S5M8767X:
> > - ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > - sec_pmic->irq_base, &s5m8767_irq_chip,
> > - &sec_pmic->irq_data);
> > + sec_irq_chip = &s5m8767_irq_chip;
> > break;
> > case S2MPS11X:
> > - ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > - sec_pmic->irq_base, &s2mps11_irq_chip,
> > - &sec_pmic->irq_data);
> > + sec_irq_chip = &s2mps11_irq_chip;
> > break;
> > case S2MPS14X:
> > - ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > - sec_pmic->irq_base, &s2mps14_irq_chip,
> > - &sec_pmic->irq_data);
> > + sec_irq_chip = &s2mps14_irq_chip;
> > + break;
> > + case S2MPU02:
> > + sec_irq_chip = &s2mpu02_irq_chip;
> > break;
> > default:
> > dev_err(sec_pmic->dev, "Unknown device type %lu\n",
> > @@ -390,6 +464,10 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> > return -EINVAL;
> > }
> >
> > + ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
> > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > + sec_pmic->irq_base, sec_irq_chip,
> > + &sec_pmic->irq_data);
> > if (ret != 0) {
> > dev_err(sec_pmic->dev, "Failed to register IRQ chip: %d\n", ret);
> > return ret;
> > diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> > index 47d8424..b5f73de 100644
> > --- a/include/linux/mfd/samsung/core.h
> > +++ b/include/linux/mfd/samsung/core.h
> > @@ -21,6 +21,7 @@ enum sec_device_type {
> > S2MPA01,
> > S2MPS11X,
> > S2MPS14X,
> > + S2MPU02,
> > };
> >
> > /**
> > diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
> > index 1224f44..f35af73 100644
> > --- a/include/linux/mfd/samsung/irq.h
> > +++ b/include/linux/mfd/samsung/irq.h
> > @@ -129,6 +129,30 @@ enum s2mps14_irq {
> > S2MPS14_IRQ_NR,
> > };
> >
> > +enum s2mpu02_irq {
> > + S2MPU02_IRQ_PWRONF,
> > + S2MPU02_IRQ_PWRONR,
> > + S2MPU02_IRQ_JIGONBF,
> > + S2MPU02_IRQ_JIGONBR,
> > + S2MPU02_IRQ_ACOKBF,
> > + S2MPU02_IRQ_ACOKBR,
> > + S2MPU02_IRQ_PWRON1S,
> > + S2MPU02_IRQ_MRB,
> > +
> > + S2MPU02_IRQ_RTC60S,
> > + S2MPU02_IRQ_RTCA1,
> > + S2MPU02_IRQ_RTCA0,
> > + S2MPU02_IRQ_SMPL,
> > + S2MPU02_IRQ_RTC1S,
> > + S2MPU02_IRQ_WTSR,
> > +
> > + S2MPU02_IRQ_INT120C,
> > + S2MPU02_IRQ_INT140C,
> > + S2MPU02_IRQ_TSD,
> > +
> > + S2MPU02_IRQ_NR,
> > +};
> > +
> > /* Masks for interrupts are the same as in s2mps11 */
> > #define S2MPS14_IRQ_TSD_MASK (1 << 2)
> >
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Lee Jones: "Re: [PATCHv6 2/3] regulator: s2mps11: Add support S2MPU02 regulator device"
Previous message: Varka Bhadram: "Re: [PATCH net-next v2 3/3] devicetree: add devicetree bindings for cc2520 driver"
In reply to: Lee Jones: "Re: [PATCHv6 1/3] mfd: sec-core: Add support for S2MPU02 device"
Next in thread: Chanwoo Choi: "[PATCHv6 2/3] regulator: s2mps11: Add support S2MPU02 regulator device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]