[PATCH 04/13] AT91: PIT: Rework probe functions
From: Maxime Ripard
Date: Wed Jun 25 2014 - 09:10:33 EST
The PIT timer driver until now had a single probe function, disregarding wether
it was probed through DT or in the old-style way. This code later on was
calling some DT function to retrieve the proper values for its base address,
interrupts and clocks.
While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE,
and the two different probe path were not as clearly separated as they could
be.
Rework the probe path to take this into account, and switch to
CLOCKSOURCE_OF_DECLARE.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-at91/Kconfig | 1 +
arch/arm/mach-at91/at91sam926x_time.c | 108 +++++++++++++++-------------------
arch/arm/mach-at91/board-dt-sam9.c | 3 +-
arch/arm/mach-at91/board-dt-sama5.c | 3 +-
4 files changed, 51 insertions(+), 64 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45b55e0f0db6..a64412a020d3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -37,6 +37,7 @@ config AT91_SAM9G45_RESET
default !ARCH_AT91X40
config AT91_SAM9_TIME
+ select CLKSRC_OF if OF
bool
config HAVE_AT91_SMD
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 38490645efea..e953197e5a5c 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -19,7 +19,6 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <asm/mach/time.h>
#include <mach/hardware.h>
#define AT91_PIT_MR 0x00 /* Mode Register */
@@ -176,81 +175,21 @@ static struct irqaction at91sam926x_pit_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91sam926x_pit_interrupt,
- .irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
-#ifdef CONFIG_OF
-static struct of_device_id pit_timer_ids[] = {
- { .compatible = "atmel,at91sam9260-pit" },
- { /* sentinel */ }
-};
-
-static int __init of_at91sam926x_pit_init(void)
-{
- struct device_node *np;
- int ret;
-
- np = of_find_matching_node(NULL, pit_timer_ids);
- if (!np)
- goto err;
-
- pit_base_addr = of_iomap(np, 0);
- if (!pit_base_addr)
- goto node_err;
-
- mck = of_clk_get(np, 0);
-
- /* Get the interrupts property */
- ret = irq_of_parse_and_map(np, 0);
- if (!ret) {
- pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
- if (!IS_ERR(mck))
- clk_put(mck);
- goto ioremap_err;
- }
- at91sam926x_pit_irq.irq = ret;
-
- of_node_put(np);
-
- return 0;
-
-ioremap_err:
- iounmap(pit_base_addr);
-node_err:
- of_node_put(np);
-err:
- return -EINVAL;
-}
-#else
-static int __init of_at91sam926x_pit_init(void)
-{
- return -EINVAL;
-}
-#endif
-
/*
* Set up both clocksource and clockevent support.
*/
-void __init at91sam926x_pit_init(void)
+static void __init at91sam926x_pit_common_init(void)
{
unsigned long pit_rate;
unsigned bits;
int ret;
- mck = ERR_PTR(-ENOENT);
-
- /* For device tree enabled device: initialize here */
- of_at91sam926x_pit_init();
-
/*
* Use our actual MCK to figure out how many MCK/16 ticks per
* 1/HZ period (instead of a compile-time constant LATCH).
*/
- if (IS_ERR(mck))
- mck = clk_get(NULL, "mck");
-
- if (IS_ERR(mck))
- panic("AT91: PIT: Unable to get mck clk\n");
pit_rate = clk_get_rate(mck) / 16;
pit_cycle = (pit_rate + HZ/2) / HZ;
WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
@@ -277,6 +216,51 @@ void __init at91sam926x_pit_init(void)
clockevents_register_device(&pit_clkevt);
}
+static void __init at91sam926x_pit_dt_init(struct device_node *node)
+{
+ unsigned int irq;
+
+ pit_base_addr = of_iomap(node, 0);
+ if (!pit_base_addr)
+ return;
+
+ mck = of_clk_get(node, 0);
+ if (IS_ERR(mck))
+ /* Fallback on clkdev for !CCF-based boards */
+ mck = clk_get(NULL, "mck");
+
+ if (IS_ERR(mck))
+ panic("AT91: PIT: Unable to get mck clk\n");
+
+ /* Get the interrupts property */
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq) {
+ pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
+ goto clk_err;
+ }
+
+ at91sam926x_pit_irq.irq = irq;
+
+ at91sam926x_pit_common_init();
+
+clk_err:
+ clk_put(mck);
+ iounmap(pit_base_addr);
+}
+CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
+ at91sam926x_pit_dt_init);
+
+void __init at91sam926x_pit_init(void)
+{
+ mck = clk_get(NULL, "mck");
+ if (IS_ERR(mck))
+ panic("AT91: PIT: Unable to get mck clk\n");
+
+ at91sam926x_pit_irq.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
+
+ at91sam926x_pit_common_init();
+}
+
void __init at91sam926x_ioremap_pit(u32 addr)
{
if (of_have_populated_dt())
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 575b0be66ca8..a9fcdadfd929 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -14,6 +14,7 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -31,7 +32,7 @@ static void __init sam9_dt_timer_init(void)
#if defined(CONFIG_COMMON_CLK)
of_clk_init(NULL);
#endif
- at91sam926x_pit_init();
+ clocksource_of_init();
}
static const struct of_device_id irq_of_match[] __initconst = {
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 075ec0576ada..c07dd2395f36 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -32,7 +33,7 @@ static void __init sama5_dt_timer_init(void)
#if defined(CONFIG_COMMON_CLK)
of_clk_init(NULL);
#endif
- at91sam926x_pit_init();
+ clocksource_of_init();
}
static const struct of_device_id irq_of_match[] __initconst = {
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/