[PATCH 00/13] AT91: PIT: Cleanups and move to drivers/clocksource
From: Maxime Ripard
Date: Wed Jun 25 2014 - 09:13:19 EST
Hi everyone,
This series cleans up the PIT driver in order for it to not depend on
anything in mach-at91 anymore, and in the end move it out of
mach-at91.
Along the way, these patches also do a bit of cleanup.
This has been tested on a G45-EK without DT and an Xplained with DT.
Thanks,
Maxime
Maxime Ripard (13):
AT91: PIT: Follow the general coding rules
AT91: generic.h: Add include safe guards
AT91: PIT: Use of_have_populated_dt instead of CONFIG_OF
AT91: PIT: Rework probe functions
AT91: dt: Remove init_time definitions
AT91: PIT: Use consistent exit path in probe
AT91: PIT: Use pr_fmt
AT91: PIT: use request_irq instead of setup_irq
AT91: PIT: (Almost) remove the global variables
AT91: soc: Add init_time callback
AT91: Convert the boards to the init_time callback
AT91: PIT: Convert to an early_platform_device
AT91: PIT: Move the driver to drivers/clocksource
arch/arm/mach-at91/Kconfig | 3 -
arch/arm/mach-at91/Makefile | 1 -
arch/arm/mach-at91/at91sam9260.c | 34 +++-
arch/arm/mach-at91/at91sam9261.c | 34 +++-
arch/arm/mach-at91/at91sam9263.c | 34 +++-
arch/arm/mach-at91/at91sam926x_time.c | 294 ------------------------------
arch/arm/mach-at91/at91sam9g45.c | 35 +++-
arch/arm/mach-at91/at91sam9rl.c | 34 +++-
arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
arch/arm/mach-at91/board-cam60.c | 2 +-
arch/arm/mach-at91/board-cpu9krea.c | 2 +-
arch/arm/mach-at91/board-dt-sam9.c | 10 --
arch/arm/mach-at91/board-dt-sama5.c | 9 -
arch/arm/mach-at91/board-flexibity.c | 2 +-
arch/arm/mach-at91/board-foxg20.c | 2 +-
arch/arm/mach-at91/board-gsia18s.c | 2 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
arch/arm/mach-at91/board-sam9260ek.c | 2 +-
arch/arm/mach-at91/board-sam9261ek.c | 4 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/board-sam9g20ek.c | 4 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
arch/arm/mach-at91/board-sam9rlek.c | 2 +-
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-at91/board-stamp9g20.c | 4 +-
arch/arm/mach-at91/generic.h | 8 +-
arch/arm/mach-at91/setup.c | 5 +
arch/arm/mach-at91/soc.h | 1 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/at91sam926x_time.c | 304 ++++++++++++++++++++++++++++++++
32 files changed, 506 insertions(+), 343 deletions(-)
delete mode 100644 arch/arm/mach-at91/at91sam926x_time.c
create mode 100644 drivers/clocksource/at91sam926x_time.c
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/