Re: [PATCH 4/6] x86-mce: Add spinlocks to prevent duplicated MCP and CMCI reports.

[Borislav Petkov]

On Wed, Jul 09, 2014 at 10:09:24AM -0700, Havard Skinnemoen wrote:
> From: Ewout van Bekkum <ewout@xxxxxxxxxx>
> 
> machine_check_poll() was modified to use spin_lock_irqsave independently
> per bank when a valid MCE is found to prevent duplicated MCE reports by
> the CMCI and polling methods. In the common case no MCE will be found,
> so the lock is not acquired until a valid MCE is found. The status is
> reread after the lock is acquired in case the MCE was already handled by
> a different thread. A unique spinlock is used per bank number, so
> contention should be mostly limited to non-shared banks.
> 
> Signed-off-by: Ewout van Bekkum <ewout@xxxxxxxxxx>
> Signed-off-by: Havard Skinnemoen <hskinnemoen@xxxxxxxxxx>
> ---
>  arch/x86/kernel/cpu/mcheck/mce-internal.h |  1 +
>  arch/x86/kernel/cpu/mcheck/mce.c          | 21 ++++++++++++++++++++-
>  2 files changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
> index 2f0b1e8..aa6843a 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
> +++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
> @@ -19,6 +19,7 @@ struct mce_bank {
>  	unsigned char init;				/* initialise bank? */
>  	struct device_attribute attr;			/* device attribute */
>  	char			attrname[ATTR_LEN];	/* attribute name */
> +	spinlock_t poll_spinlock;			/* lock for polling */
>  };
>  
>  int mce_severity(struct mce *a, int tolerant, char **msg);
> diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
> index 1ebdd34..64270d7 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce.c
> +++ b/arch/x86/kernel/cpu/mcheck/mce.c
> @@ -41,6 +41,8 @@
>  #include <linux/debugfs.h>
>  #include <linux/irq_work.h>
>  #include <linux/export.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
>  
>  #include <asm/processor.h>
>  #include <asm/mce.h>
> @@ -596,6 +598,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
>  {
>  	struct mce m;
>  	int i;
> +	unsigned long irq_flags;
>  
>  	this_cpu_inc(mce_poll_count);
>  
> @@ -617,14 +620,28 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
>  
>  		this_cpu_write(mce_polled_error, 1);
>  		/*
> +		 * Optimize for the common case where no MCEs are found.
> +		 */
> +		spin_lock_irqsave(&mce_banks[i].poll_spinlock, irq_flags);

This is pretty heavy - we're disabling interrupts for *every* bank and
with shorter polling intervals, this could become problematic fast.

What's wrong with doing this with cheap atomic_inc/dec_and_test?

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/