Re: [RESEND][PATCH 06/10][SCSI]mpt2sas: For >2TB volumes, DirectDrive support sends IO's with LBA bit 31 to IR FW instead of DirectDrive
From: Martin K. Petersen
Date: Sun Jul 13 2014 - 11:29:23 EST
>>>>> "Sreekanth" == Reddy, Sreekanth <Sreekanth.Reddy@xxxxxxxxxxxxx> writes:
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6ae109b..4a0728a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3865,7 +3865,8 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
u16 smid)
{
- u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
+ u32 p_lba, stripe_off, stripe_unit, column, io_size;
+ u64 v_lba;
u32 stripe_sz, stripe_exp;
u8 num_pds, *cdb_ptr, i;
u8 cdb0 = scmd->cmnd[0];
@@ -3882,12 +3883,17 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
| cdb_ptr[5])) {
io_size = scsi_bufflen(scmd) >>
raid_device->block_exponent;
- i = (cdb0 < READ_16) ? 2 : 6;
+
/* get virtual lba */
- v_lba = be32_to_cpu(*(__be32 *)(&cdb_ptr[i]));
+ if (cdb0 < READ_16)
+ v_lba = be32_to_cpu(*(__be32 *)(&cdb_ptr[2]));
+ else
+ v_lba = be64_to_cpu(*(__be64 *)(&cdb_ptr[2]));
Why aren't you using scsi_get_lba() instead of all this nasty CDB
parsing?
+
+ i = (cdb0 < READ_16) ? 2 : 6;
What about WRITE_16? WRITE_16 > READ_16.
if (((u64)v_lba + (u64)io_size - 1) <=
- (u32)raid_device->max_lba) {
+ raid_device->max_lba) {
stripe_sz = raid_device->stripe_sz;
stripe_exp = raid_device->stripe_exponent;
stripe_off = v_lba & (stripe_sz - 1);
Also, this is not touched by the patch, but you're then doing:
(*(__be32 *)(&cdb_ptr[i])) = cpu_to_be32(p_lba);
What if this is a 6-byte READ/WRITE command? You'll end up exceeding the
size of the LBA field.
What if you're using a 16-byte CDB and the target device LBA is > 2TB?
--
Martin K. Petersen Oracle Linux Engineering
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/