RE: Oops: 17 SMP ARM (v3.16-rc2)

[Mattis Lorentzon]

Russell and Fabio,

> I'd be interested to hear whether removing the
> 
> 	interrupts-extended = ...
> 
> property from your board's DT file, thereby causing you to revert back to the
> default I list above, also fixes the instability you are seeing.

We have tried to remove the board specific interrupts-extended field and the
MX6QDL_PAD_GPIO_6__ENET_IRQ entry. Sadly this did not seem to improve
the stalls. Our interrupts look like this now:

150:      15519          0          0          0       GIC 150  2188000.ethernet
151:          0          0          0          0       GIC 151  2188000.ethernet

Our device tree might still be slightly incorrect. We have noticed that our
RGMII_INT is connected to GPIO 19 (P5) which might be nonstandard (we are
a bit surprised that this works at all). We are not quite sure how to configure
this properly.

Best regards,
Mattis Lorentzon
***************************************************************
Consider the environment before printing this message.

To read Autoliv's Information and Confidentiality Notice, follow this link:
http://www.autoliv.com/disclaimer.html
***************************************************************

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/