[RESEND][PATCH 07/10][SCSI]mpt2sas: Added Reply Descriptor Post Queue (RDPQ) Array support

From: Sreekanth Reddy
Date: Tue Aug 12 2014 - 05:25:13 EST

Sending the this patch once agin using git send-email.

Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.

When firmware receives this address, it will program each of the
Reply Descriptor Post Queue registers, as each reply queue has its
own register. Thus the firmware, starting from a base address it
determines the starting address of the subsequent reply queues
through some simple arithmetic calculations.

The size of this contiguous block of memory pool is directly proportional
to number of MSI-X vectors and the HBA queue depth. For example higher
MSIX vectors requires larger contiguous block of memory pool.

But some of the OS kernels are unable to allocate this larger
contiguous block of memory pool.

So, the proposal is to allocate memory independently for each
Reply Queue and pass down all of the addresses to the firmware.
Then the firmware will just take each address and program the value
into the correct register.

When HBAs with older firmware(i.e. without RDPQ capability) is used
with this new driver then the max_msix_vectors value would be set
to 8 by default.

Change_set in v2:

1. Declared _base_get_ioc_facts() function at the beginning of the mpt2sas_base.c
file instead of moving all these functions before mpt2sas_base_map_resources() function
a. _base_wait_for_doorbell_int()
b. _base_wait_for_doorbell_ack()
c. _base_wait_for_doorbell_not_used()
d. _base_handshake_req_reply_wait()
e. _base_get_ioc_facts()

2. Initially set the consistent DMA mask to 32 bit and then change it to 64 bit mask
after allocating RDPQ pools by calling the function _base_change_consistent_dma_mask.
This is to ensure that all the upper 32 bits of RDPQ entries's base address to be same.

3. Reduced the redundancy between the RDPQ and non-RDPQ support in these following functions
a. _base_release_memory_pools()
b. _base_allocate_memory_pools()
c. _base_send_ioc_init()
d. _base_make_ioc_operational()

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 233 +++++++++++++++++++++++++++---------
drivers/scsi/mpt2sas/mpt2sas_base.h | 18 ++-
2 files changed, 193 insertions(+), 58 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 24d0e52..018ae10 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -92,6 +92,11 @@ static int disable_discovery = -1;
module_param(disable_discovery, int, 0);
MODULE_PARM_DESC(disable_discovery, " disable discovery ");

+static int dma_mask;
+
+static int
+_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag);
+
/**
* _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
*
@@ -1179,17 +1184,22 @@ static int
_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
{
struct sysinfo s;
- char *desc = NULL;
+ u64 consistent_dma_mask;
+
+ if (dma_mask)
+ consistent_dma_mask = DMA_BIT_MASK(64);
+ else
+ consistent_dma_mask = DMA_BIT_MASK(32);

if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
- DMA_BIT_MASK(64))) {
+ consistent_dma_mask)) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
- desc = "64";
+ dma_mask = 64;
goto out;
}
}
@@ -1198,18 +1208,29 @@ _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
ioc->sge_size = sizeof(Mpi2SGESimple32_t);
- desc = "32";
+ dma_mask = 32;
} else
return -ENODEV;

out:
si_meminfo(&s);
- printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, "
- "total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram));
+ printk(MPT2SAS_INFO_FMT
+ "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
+ ioc->name, dma_mask, convert_to_kb(s.totalram));

return 0;
}

+static int
+_base_change_consistent_dma_mask(struct MPT2SAS_ADAPTER *ioc,
+ struct pci_dev *pdev)
+{
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ return -ENODEV;
+ }
+ return 0;
+}
/**
* _base_check_enable_msix - checks MSIX capabable.
* @ioc: per adapter object
@@ -1406,6 +1427,9 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
ioc->reply_queue_count = min_t(int, ioc->cpu_count,
ioc->msix_vector_count);

+ if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
+ max_msix_vectors = 8;
+
if (max_msix_vectors > 0) {
ioc->reply_queue_count = min_t(int, max_msix_vectors,
ioc->reply_queue_count);
@@ -1534,6 +1558,16 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
}

_base_mask_interrupts(ioc);
+
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out_fail;
+
+ if (!ioc->rdpq_array_enable_assigned) {
+ ioc->rdpq_array_enable = ioc->rdpq_array_capable;
+ ioc->rdpq_array_enable_assigned = 1;
+ }
+
r = _base_enable_msix(ioc);
if (r)
goto out_fail;
@@ -2331,7 +2365,8 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
static void
_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
{
- int i;
+ int i = 0;
+ struct reply_post_struct *rps;

dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
@@ -2372,15 +2407,25 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
ioc->reply_free = NULL;
}

- if (ioc->reply_post_free) {
- pci_pool_free(ioc->reply_post_free_dma_pool,
- ioc->reply_post_free, ioc->reply_post_free_dma);
+ if (ioc->reply_post) {
+ do {
+ rps = &ioc->reply_post[i];
+ if (rps->reply_post_free) {
+ pci_pool_free(
+ ioc->reply_post_free_dma_pool,
+ rps->reply_post_free,
+ rps->reply_post_free_dma);
+ dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply_post_free_pool(0x%p): free\n",
+ ioc->name, rps->reply_post_free));
+ rps->reply_post_free = NULL;
+ }
+ } while (ioc->rdpq_array_enable &&
+ (++i < ioc->reply_queue_count));
+
if (ioc->reply_post_free_dma_pool)
pci_pool_destroy(ioc->reply_post_free_dma_pool);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "reply_post_free_pool(0x%p): free\n", ioc->name,
- ioc->reply_post_free));
- ioc->reply_post_free = NULL;
+ kfree(ioc->reply_post);
}

if (ioc->config_page) {
@@ -2523,6 +2568,65 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
ioc->chains_needed_per_io));

+ /* reply post queue, 16 byte align */
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+
+ sz = reply_post_free_sz;
+ if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
+ sz *= ioc->reply_queue_count;
+
+ ioc->reply_post = kcalloc((ioc->rdpq_array_enable) ?
+ (ioc->reply_queue_count):1,
+ sizeof(struct reply_post_struct), GFP_KERNEL);
+
+ if (!ioc->reply_post) {
+ printk(MPT2SAS_ERR_FMT "reply_post_free pool: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
+ ioc->pdev, sz, 16, 0);
+ if (!ioc->reply_post_free_dma_pool) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ i = 0;
+ do {
+ ioc->reply_post[i].reply_post_free =
+ pci_pool_alloc(ioc->reply_post_free_dma_pool,
+ GFP_KERNEL,
+ &ioc->reply_post[i].reply_post_free_dma);
+ if (!ioc->reply_post[i].reply_post_free) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_post[i].reply_post_free, 0, sz);
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply post free pool (0x%p): depth(%d),"
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->reply_post[i].reply_post_free,
+ ioc->reply_post_queue_depth, 8, sz/1024));
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply_post_free_dma = (0x%llx)\n", ioc->name,
+ (unsigned long long)
+ ioc->reply_post[i].reply_post_free_dma));
+ total_sz += sz;
+ } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
+
+ if (dma_mask == 64) {
+ if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
+ printk(MPT2SAS_WARN_FMT
+ "no suitable consistent DMA mask for %s\n",
+ ioc->name, pci_name(ioc->pdev));
+ goto out;
+ }
+ }
+
ioc->scsiio_depth = ioc->hba_queue_depth -
ioc->hi_priority_depth - ioc->internal_depth;

@@ -2734,37 +2838,6 @@ chain_done:
"(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
total_sz += sz;

- /* reply post queue, 16 byte align */
- reply_post_free_sz = ioc->reply_post_queue_depth *
- sizeof(Mpi2DefaultReplyDescriptor_t);
- if (_base_is_controller_msix_enabled(ioc))
- sz = reply_post_free_sz * ioc->reply_queue_count;
- else
- sz = reply_post_free_sz;
- ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
- ioc->pdev, sz, 16, 0);
- if (!ioc->reply_post_free_dma_pool) {
- printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create "
- "failed\n", ioc->name);
- goto out;
- }
- ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool ,
- GFP_KERNEL, &ioc->reply_post_free_dma);
- if (!ioc->reply_post_free) {
- printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc "
- "failed\n", ioc->name);
- goto out;
- }
- memset(ioc->reply_post_free, 0, sz);
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool"
- "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
- ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8,
- sz/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = "
- "(0x%llx)\n", ioc->name, (unsigned long long)
- ioc->reply_post_free_dma));
- total_sz += sz;
-
ioc->config_page_sz = 512;
ioc->config_page = pci_alloc_consistent(ioc->pdev,
ioc->config_page_sz, &ioc->config_page_dma);
@@ -3436,6 +3509,9 @@ _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
ioc->ir_firmware = 1;
+ if ((facts->IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
+ ioc->rdpq_array_capable = 1;
facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
facts->IOCRequestFrameSize =
le16_to_cpu(mpi_reply.IOCRequestFrameSize);
@@ -3471,9 +3547,12 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2IOCInitRequest_t mpi_request;
Mpi2IOCInitReply_t mpi_reply;
- int r;
+ int i, r = 0;
struct timeval current_time;
u16 ioc_status;
+ u32 reply_post_free_array_sz = 0;
+ Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
+ dma_addr_t reply_post_free_array_dma;

dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
@@ -3502,9 +3581,31 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
cpu_to_le64((u64)ioc->request_dma);
mpi_request.ReplyFreeQueueAddress =
cpu_to_le64((u64)ioc->reply_free_dma);
- mpi_request.ReplyDescriptorPostQueueAddress =
- cpu_to_le64((u64)ioc->reply_post_free_dma);

+ if (ioc->rdpq_array_enable) {
+ reply_post_free_array_sz = ioc->reply_queue_count *
+ sizeof(Mpi2IOCInitRDPQArrayEntry);
+ reply_post_free_array = pci_alloc_consistent(ioc->pdev,
+ reply_post_free_array_sz, &reply_post_free_array_dma);
+ if (!reply_post_free_array) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free_array: pci_alloc_consistent failed\n",
+ ioc->name);
+ r = -ENOMEM;
+ goto out;
+ }
+ memset(reply_post_free_array, 0, reply_post_free_array_sz);
+ for (i = 0; i < ioc->reply_queue_count; i++)
+ reply_post_free_array[i].RDPQBaseAddress =
+ cpu_to_le64(
+ (u64)ioc->reply_post[i].reply_post_free_dma);
+ mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)reply_post_free_array_dma);
+ } else {
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
+ }

/* This time stamp specifies number of milliseconds
* since epoch ~ midnight January 1, 1970.
@@ -3532,7 +3633,7 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
if (r != 0) {
printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
ioc->name, __func__, r);
- return r;
+ goto out;
}

ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
@@ -3542,7 +3643,12 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
r = -EIO;
}

- return 0;
+out:
+ if (reply_post_free_array)
+ pci_free_consistent(ioc->pdev, reply_post_free_array_sz,
+ reply_post_free_array,
+ reply_post_free_array_dma);
+ return r;
}

/**
@@ -4075,7 +4181,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
u8 hide_flag;
struct adapter_reply_queue *reply_q;
long reply_post_free;
- u32 reply_post_free_sz;
+ u32 reply_post_free_sz, index = 0;

dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
@@ -4146,19 +4252,27 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
_base_assign_reply_queues(ioc);

/* initialize Reply Post Free Queue */
- reply_post_free = (long)ioc->reply_post_free;
reply_post_free_sz = ioc->reply_post_queue_depth *
sizeof(Mpi2DefaultReplyDescriptor_t);
+ reply_post_free = (long)ioc->reply_post[index].reply_post_free;
list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
reply_q->reply_post_host_index = 0;
reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
reply_post_free;
for (i = 0; i < ioc->reply_post_queue_depth; i++)
reply_q->reply_post_free[i].Words =
- cpu_to_le64(ULLONG_MAX);
+ cpu_to_le64(ULLONG_MAX);
if (!_base_is_controller_msix_enabled(ioc))
goto skip_init_reply_post_free_queue;
- reply_post_free += reply_post_free_sz;
+ /*
+ * If RDPQ is enabled, switch to the next allocation.
+ * Otherwise advance within the contiguous region.
+ */
+ if (ioc->rdpq_array_enable)
+ reply_post_free = (long)
+ ioc->reply_post[++index].reply_post_free;
+ else
+ reply_post_free += reply_post_free_sz;
}
skip_init_reply_post_free_queue:

@@ -4286,6 +4400,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
}
}

+ ioc->rdpq_array_enable_assigned = 0;
r = mpt2sas_base_map_resources(ioc);
if (r)
goto out_free_resources;
@@ -4647,6 +4762,16 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
r = -EFAULT;
goto out;
}
+
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out;
+
+ if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
+ panic("%s: Issue occurred with flashing controller firmware."
+ "Please reboot the system and ensure that the correct"
+ " firmware version is running\n", ioc->name);
+
r = _base_make_ioc_operational(ioc, sleep_flag);
if (!r)
_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index e0e4dd4..0d40318 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -636,6 +636,11 @@ struct mpt2sas_port_facts {
u16 MaxPostedCmdBuffers;
};

+struct reply_post_struct {
+ Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+ dma_addr_t reply_post_free_dma;
+};
+
/**
* enum mutex_type - task management mutex type
* @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
@@ -779,8 +784,11 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
* @reply_free_dma_pool:
* @reply_free_host_index: tail index in pool to insert free replys
* @reply_post_queue_depth: reply post queue depth
- * @reply_post_free: pool for reply post (64bit descriptor)
- * @reply_post_free_dma:
+ * @reply_post_struct: struct for reply_post_free physical & virt address
+ * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
+ * @rdpq_array_enable: rdpq_array support is enabled in the driver
+ * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
+ * is assigned only ones
* @reply_queue_count: number of reply queue's
* @reply_queue_list: link list contaning the reply queue info
* @reply_post_host_index: head index in the pool where FW completes IO
@@ -972,8 +980,10 @@ struct MPT2SAS_ADAPTER {

/* reply post queue */
u16 reply_post_queue_depth;
- Mpi2ReplyDescriptorsUnion_t *reply_post_free;
- dma_addr_t reply_post_free_dma;
+ struct reply_post_struct *reply_post;
+ u8 rdpq_array_capable;
+ u8 rdpq_array_enable;
+ u8 rdpq_array_enable_assigned;
struct dma_pool *reply_post_free_dma_pool;
u8 reply_queue_count;
struct list_head reply_queue_list;
--
2.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/