Re: [PATCH 2/3] ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree

[Thierry Reding]

On Tue, Aug 05, 2014 at 11:12:59AM +0300, Mikko Perttunen wrote:
> This adds the required information to reset the board during an overheating
> situation to the Jetson TK1 device tree. The thermal reset is handled by the
> PMC by sending an I2C message to the PMIC. The entries specify the I2C
> message to be sent.
> 
> Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 624b0fb..ee178c4 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1617,6 +1617,11 @@
>  		nvidia,core-pwr-off-time = <61036>;
>  		nvidia,core-power-req-active-high;
>  		nvidia,sys-clock-req-active-high;
> +
> +		nvidia,thermtrip-pmu-i2c-addr = <0x40>;
> +		nvidia,thermtrip-i2c-controller = <4>;
> +		nvidia,thermtrip-reg-addr = <0x36>;
> +		nvidia,thermtrip-reg-data = <0x2>;

Given the number of properties that this can potentially have, I wonder
if perhaps it would be a good idea to put this into a subnode, like
this:

		thermtrip {
			pmu-i2c-addr = <0x40>;
			i2c-controller = <4>;
			...
		};

Thierry

Attachment: pgpyg2mabLyj7.pgp
Description: PGP signature