Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver

[Tony Lindgren]

* Tony Lindgren <tony@xxxxxxxxxxx> [140815 14:10]:
> * Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> [140815 10:46]:
> > This patch provides a 8250-core based UART driver for the internal OMAP
> > UART. The long term goal is to provide the same functionality as the
> > current OMAP uart driver and DMA support.
> > I tried to merge omap-serial code together with the 8250-core code.
> > There should should be hardly a noticable difference. The trigger levels
> > are different compared to omap-serial:
> 
> Nice, now it mostly works for me with off-idle too :) That is as long
> as I have the DMA channels commented out in the .dts file.
> 
> And I'm still seeing an occasional hang with pstore console just
> showing:
> 
> [  289.076538] In-band Error seen by MPU  at address 0
> [  289.076538] ------------[ cut here ]------------
> [  289.076568] WARNING: CPU: 0 PID: 99 at drivers/bus/omap_l3_smx.c:162 omap3_l3_app_irq+0xdc/0x134()
> [  289.076599] Modules linked in:
> [  289.076599] CPU: 0 PID: 99 Comm: test-idle-off-8 Tainted: G        W      3.16.0+ #510
> [  289.076629] [<c0016c44>] (unwind_backtrace) from [<c00129c8>] (show_stack+0x20/0x24)
> [  289.076660] [<c00129c8>] (show_stack) from [<c0714cd4>] (dump_stack+0x88/0xa4)
> 
> Which most likely means there's still some glitch with the
> runtime PM somewhere and registers are being accessed when
> not clocked. I _think_ I did not see it when I did not have
> console=ttyS2,115200 in my cmdline but was using just pstore
> console.

Oh and echo mem > /sys/power/state and then hitting a key on the serial
console won't wake the system. Does that need to be manually configured
for device_may_wakeup()?
 
> > The device name is ttyS based instead of ttyO. If a ttyO based node name
> > is required please ask udev for it. If both driver are activated (this
> > and omap-serial) then this serial driver will take control over the
> > device due to the link order
> 
> That's still not going to help with the existing kernel cmdlines
> and existing installs.. I wonder if we can just do a minimal
> dummy serial-omap.c that just proxies all the ttyO read/write
> access to ttyS?
> 
> Regards,
> 
> Tony
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/