Re: [PATCH 09/11 v4] coresight: adding support for beagle and beagleXM

[Marcin Jabrzyk]

Hi,

W dniu 20.08.2014 o 19:03, mathieu.poirier@xxxxxxxxxx pisze:
> From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
>
> Currently supporting ETM and ETB.  Support for TPIU
> and SDTI are yet to be added.
Did you tried running the drivers on board or are there any special
preparation needed?
I've BeagleBoard-xM Rev. C applied your patches and enabled the
functions the in menuconfig.
But on dmesg I see that:

[    0.685028] of_amba_device_create(): amba_device_add() failed (-19)
for /etb@5401b000
[    0.685119] of_amba_device_create(): amba_device_add() failed (-19)
for /etm@54010000

There are no nodes according coresight in /sys/kernel/debug/ .

Best regards,
Marcin

>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/omap3-beagle-xm.dts | 28 ++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap3-beagle.dts    | 28 ++++++++++++++++++++++++++++
>  2 files changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index 1becefc..eec73d8 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -145,6 +145,34 @@
>  			};
>  		};
>  	};
> +
> +	etb@5401b000 {
> +		compatible = "arm,coresight-etb10", "arm,primecell";
> +		reg = <0x5401b000 0x1000>;
> +
> +		coresight-default-sink;
> +		clocks = <&emu_src_ck>;
> +		clock-names = "apb_pclk";
> +		port {
> +			etb_in: endpoint {
> +				slave-mode;
> +				remote-endpoint = <&etm_out>;
> +			};
> +		};
> +	};
> +
> +	etm@54010000 {
> +		compatible = "arm,coresight-etm3x", "arm,primecell";
> +		reg = <0x54010000 0x1000>;
> +
> +		clocks = <&emu_src_ck>;
> +		clock-names = "apb_pclk";
> +		port {
> +			etm_out: endpoint {
> +				remote-endpoint = <&etb_in>;
> +			};
> +		};
> +	};
>  };
>  
>  &omap3_pmx_wkup {
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 3c3e6da..a151daf 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -140,6 +140,34 @@
>  			};
>  		};
>  	};
> +
> +	etb@540000000 {
> +		compatible = "arm,coresight-etb10", "arm,primecell";
> +		reg = <0x5401b000 0x1000>;
> +
> +		coresight-default-sink;
> +		clocks = <&emu_src_ck>;
> +		clock-names = "apb_pclk";
> +		port {
> +			etb_in: endpoint {
> +				slave-mode;
> +				remote-endpoint = <&etm_out>;
> +			};
> +		};
> +	};
> +
> +	etm@54010000 {
> +		compatible = "arm,coresight-etm3x", "arm,primecell";
> +		reg = <0x54010000 0x1000>;
> +
> +		clocks = <&emu_src_ck>;
> +		clock-names = "apb_pclk";
> +		port {
> +			etm_out: endpoint {
> +				remote-endpoint = <&etb_in>;
> +			};
> +		};
> +	};
>  };
>  
>  &omap3_pmx_wkup {

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/