Re: [PATCH 09/11 v4] coresight: adding support for beagle and beagleXM

From: Mathieu Poirier
Date: Mon Aug 25 2014 - 10:02:48 EST


On 24 August 2014 15:38, Marcin Jabrzyk <marcin.jabrzyk@xxxxxxxxx> wrote:
> Hi,
>
> W dniu 20.08.2014 o 19:03, mathieu.poirier@xxxxxxxxxx pisze:
>> From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
>>
>> Currently supporting ETM and ETB. Support for TPIU
>> and SDTI are yet to be added.
> Did you tried running the drivers on board or are there any special
> preparation needed?
> I've BeagleBoard-xM Rev. C applied your patches and enabled the
> functions the in menuconfig.
> But on dmesg I see that:
>
> [ 0.685028] of_amba_device_create(): amba_device_add() failed (-19)
> for /etb@5401b000
> [ 0.685119] of_amba_device_create(): amba_device_add() failed (-19)
> for /etm@54010000
>
> There are no nodes according coresight in /sys/kernel/debug/ .

Right, that is because there is a problem in mainline with enabling
"emu_src_ck". The call to "clk_prepare_enable()" returns without
waiting for the clock to effectively be enabled, preventing the
components from being discovered properly.

The work around (non-upstreamable) is to have a driver getting a hold
of the clock before AMBA devices are probed. I can send you that code
(10 lines) if need be.

>
> Best regards,
> Marcin
>
>>
>> Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/omap3-beagle-xm.dts | 28 ++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap3-beagle.dts | 28 ++++++++++++++++++++++++++++
>> 2 files changed, 56 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
>> index 1becefc..eec73d8 100644
>> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
>> @@ -145,6 +145,34 @@
>> };
>> };
>> };
>> +
>> + etb@5401b000 {
>> + compatible = "arm,coresight-etb10", "arm,primecell";
>> + reg = <0x5401b000 0x1000>;
>> +
>> + coresight-default-sink;
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etb_in: endpoint {
>> + slave-mode;
>> + remote-endpoint = <&etm_out>;
>> + };
>> + };
>> + };
>> +
>> + etm@54010000 {
>> + compatible = "arm,coresight-etm3x", "arm,primecell";
>> + reg = <0x54010000 0x1000>;
>> +
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etm_out: endpoint {
>> + remote-endpoint = <&etb_in>;
>> + };
>> + };
>> + };
>> };
>>
>> &omap3_pmx_wkup {
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 3c3e6da..a151daf 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -140,6 +140,34 @@
>> };
>> };
>> };
>> +
>> + etb@540000000 {
>> + compatible = "arm,coresight-etb10", "arm,primecell";
>> + reg = <0x5401b000 0x1000>;
>> +
>> + coresight-default-sink;
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etb_in: endpoint {
>> + slave-mode;
>> + remote-endpoint = <&etm_out>;
>> + };
>> + };
>> + };
>> +
>> + etm@54010000 {
>> + compatible = "arm,coresight-etm3x", "arm,primecell";
>> + reg = <0x54010000 0x1000>;
>> +
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etm_out: endpoint {
>> + remote-endpoint = <&etb_in>;
>> + };
>> + };
>> + };
>> };
>>
>> &omap3_pmx_wkup {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/