Re: [PATCH] mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()
From: Tony Lindgren
Date: Mon Aug 25 2014 - 12:47:30 EST
* Roger Quadros <rogerq@xxxxxx> [140808 07:29]:
> commit 65b97cf6b8de introduced in v3.7 caused a regression
> by using a reversed CS_MASK thus causing omap_calculate_ecc to
> always fail. As the NAND base driver never checks for .calculate()'s
> return value, the zeroed ECC values are used as is without showing
> any error to the user. However, this won't work and the NAND device
> won't be guarded by any error code.
>
> Fix the issue by using the correct mask.
>
> Code was tested on omap3beagle using the following procedure
> - flash the primary bootloader (MLO) from the kernel to the first
> NAND partition using nandwrite.
> - boot the board from NAND. This utilizes OMAP ROM loader that
> relies on 1-bit Hamming code ECC.
>
> Fixes: 65b97cf6b8de (mtd: nand: omap2: handle nand on gpmc)
>
> Cc: <stable@xxxxxxxxxxxxxxx> [3.7+]
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
I'll apply this into omap-for-v3.17/fixes thanks.
Regards,
Tony
> ---
> drivers/mtd/nand/omap2.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index f0ed92e..e2b9b34 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -931,7 +931,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
> u32 val;
>
> val = readl(info->reg.gpmc_ecc_config);
> - if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs)
> + if (((val >> ECC_CONFIG_CS_SHIFT) & CS_MASK) != info->gpmc_cs)
> return -EINVAL;
>
> /* read ecc result */
> --
> 1.8.3.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/