[resend PATCH 3/3] arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM

[Mugunthan V N]

Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and
sleep states and enable them in board evm dts file.

Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
---
 arch/arm/boot/dts/dra7-evm.dts | 107 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index fd96ced..57e69c4 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -151,6 +151,87 @@
 			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
 		>;
 	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OFF_NONE)
+			0x254 (PIN_OFF_NONE)
+			0x258 (PIN_OFF_NONE)
+			0x25c (PIN_OFF_NONE)
+			0x260 (PIN_OFF_NONE)
+			0x264 (PIN_OFF_NONE)
+			0x268 (PIN_OFF_NONE)
+			0x26c (PIN_OFF_NONE)
+			0x270 (PIN_OFF_NONE)
+			0x274 (PIN_OFF_NONE)
+			0x278 (PIN_OFF_NONE)
+			0x27c (PIN_OFF_NONE)
+
+			/* Slave 1 */
+			0x198 (PIN_OFF_NONE)
+			0x19c (PIN_OFF_NONE)
+			0x1a0 (PIN_OFF_NONE)
+			0x1a4 (PIN_OFF_NONE)
+			0x1a8 (PIN_OFF_NONE)
+			0x1ac (PIN_OFF_NONE)
+			0x1b0 (PIN_OFF_NONE)
+			0x1b4 (PIN_OFF_NONE)
+			0x1b8 (PIN_OFF_NONE)
+			0x1bc (PIN_OFF_NONE)
+			0x1c0 (PIN_OFF_NONE)
+			0x1c4 (PIN_OFF_NONE)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_data */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_OFF_NONE)
+			0x240 (PIN_OFF_NONE)
+		>;
+	};
+
 };
 
 &i2c1 {
@@ -503,3 +584,29 @@
 &usb2_phy2 {
 	phy-supply = <&ldousb_reg>;
 };
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/