Re: [resend PATCH 3/3] arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM

[Nishanth Menon]

On 00:49-20140909, Mugunthan V N wrote:
> Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and
> sleep states and enable them in board evm dts file.
> 
> Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
> ---
>  arch/arm/boot/dts/dra7-evm.dts | 107 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 107 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index fd96ced..57e69c4 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -151,6 +151,87 @@
>  			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
>  		>;
>  	};
> +
> +	cpsw_default: cpsw_default {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
> +			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
> +			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
> +			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
> +			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
> +			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
> +			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
> +			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
> +			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
> +			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
> +			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
> +			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
> +
> +			/* Slave 2 */
> +			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
> +			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
> +			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
> +			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
> +			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
> +			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
> +			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
> +			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
> +			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
> +			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
> +			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
> +			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
> +		>;
> +
> +	};
> +
> +	cpsw_sleep: cpsw_sleep {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x250 (PIN_OFF_NONE)
> +			0x254 (PIN_OFF_NONE)
> +			0x258 (PIN_OFF_NONE)
> +			0x25c (PIN_OFF_NONE)
> +			0x260 (PIN_OFF_NONE)
> +			0x264 (PIN_OFF_NONE)
> +			0x268 (PIN_OFF_NONE)
> +			0x26c (PIN_OFF_NONE)
> +			0x270 (PIN_OFF_NONE)
> +			0x274 (PIN_OFF_NONE)
> +			0x278 (PIN_OFF_NONE)
> +			0x27c (PIN_OFF_NONE)
> +
> +			/* Slave 1 */
> +			0x198 (PIN_OFF_NONE)
> +			0x19c (PIN_OFF_NONE)
> +			0x1a0 (PIN_OFF_NONE)
> +			0x1a4 (PIN_OFF_NONE)
> +			0x1a8 (PIN_OFF_NONE)
> +			0x1ac (PIN_OFF_NONE)
> +			0x1b0 (PIN_OFF_NONE)
> +			0x1b4 (PIN_OFF_NONE)
> +			0x1b8 (PIN_OFF_NONE)
> +			0x1bc (PIN_OFF_NONE)
> +			0x1c0 (PIN_OFF_NONE)
> +			0x1c4 (PIN_OFF_NONE)
> +		>;
> +	};

NAK to sleep states -> you should be using mode 15 if you really want to
save power.

-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/