[PATCHv2 1/2] remoteproc: use a flag to detect the presence of IOMMU

[Suman Anna]

The remoteproc driver core currently relies on iommu_present() on
the bus the device is on, to perform MMU management. However, this
logic doesn't scale for multi-arch, especially for processors that
do not have an IOMMU. Replace this logic instead by using a h/w
capability flag for the presence of IOMMU in the rproc structure.

This issue is seen on OMAP platforms when trying to add a remoteproc
driver for a small Cortex M3 called the WkupM3 used for suspend /
resume management on TI AM335/AM437x SoCs. This processor does not
have an MMU. Same is the case with another processor subsystem
PRU-ICSS on AM335/AM437x. All these are platform devices, and the
current iommu_present check will not scale for the same kernel image
to support OMAP4/OMAP5 and AM335/AM437x.

The existing platform implementation drivers - OMAP remoteproc, STE
Modem remoteproc and DA8xx remoteproc, are updated as well to properly
configure the newly added rproc field.

Cc: Robert Tivy <rtivy@xxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
v2:
- set the field explicitly in all existing remoteproc platform drivers
- update patch description

 drivers/remoteproc/da8xx_remoteproc.c |  1 +
 drivers/remoteproc/omap_remoteproc.c  |  5 +++++
 drivers/remoteproc/remoteproc_core.c  | 15 ++-------------
 drivers/remoteproc/ste_modem_rproc.c  |  1 +
 include/linux/remoteproc.h            |  2 ++
 5 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index 3841b98..9fdc0af 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -224,6 +224,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 
 	drproc = rproc->priv;
 	drproc->rproc = rproc;
+	rproc->has_iommu = false;
 
 	platform_set_drvdata(pdev, rproc);
 
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 5168972..b21ce95 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -199,6 +199,11 @@ static int omap_rproc_probe(struct platform_device *pdev)
 
 	oproc = rproc->priv;
 	oproc->rproc = rproc;
+	/*
+	 * All existing OMAP IPU and DSP processors do have an MMU, and
+	 * are expected to use MMU, so this statement suffices.
+	 */
+	rproc->has_iommu = true;
 
 	platform_set_drvdata(pdev, rproc);
 
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3cd85a6..11cdb11 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -94,19 +94,8 @@ static int rproc_enable_iommu(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	int ret;
 
-	/*
-	 * We currently use iommu_present() to decide if an IOMMU
-	 * setup is needed.
-	 *
-	 * This works for simple cases, but will easily fail with
-	 * platforms that do have an IOMMU, but not for this specific
-	 * rproc.
-	 *
-	 * This will be easily solved by introducing hw capabilities
-	 * that will be set by the remoteproc driver.
-	 */
-	if (!iommu_present(dev->bus)) {
-		dev_dbg(dev, "iommu not found\n");
+	if (!rproc->has_iommu) {
+		dev_dbg(dev, "iommu not present\n");
 		return 0;
 	}
 
diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c
index c4ac910..c42a32e 100644
--- a/drivers/remoteproc/ste_modem_rproc.c
+++ b/drivers/remoteproc/ste_modem_rproc.c
@@ -289,6 +289,7 @@ static int sproc_probe(struct platform_device *pdev)
 	sproc = rproc->priv;
 	sproc->mdev = mdev;
 	sproc->rproc = rproc;
+	rproc->has_iommu = false;
 	mdev->drv_data = sproc;
 
 	/* Provide callback functions to modem device */
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 9e7e745..78b8a9b 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -404,6 +404,7 @@ enum rproc_crash_type {
  * @table_ptr: pointer to the resource table in effect
  * @cached_table: copy of the resource table
  * @table_csum: checksum of the resource table
+ * @has_iommu: flag to indicate if remote processor is behind an MMU
  */
 struct rproc {
 	struct klist_node node;
@@ -435,6 +436,7 @@ struct rproc {
 	struct resource_table *table_ptr;
 	struct resource_table *cached_table;
 	u32 table_csum;
+	bool has_iommu;
 };
 
 /* we currently support only two vrings per rvdev */
-- 
2.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/