Re: [RFC PATCH v2 09/16] leds: leds-gpio: Add support for GPIO descriptors

[Linus Walleij]

On Tue, Sep 16, 2014 at 1:52 PM, Mika Westerberg
<mika.westerberg@xxxxxxxxxxxxxxx> wrote:

> GPIO descriptors are the preferred way over legacy GPIO numbers
> nowadays. Convert the driver to use GPIO descriptors internally but
> still allow passing legacy GPIO numbers from platform data to support
> existing platforms.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>

Great!

>  #include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>

You should not need to include <linux/gpio.h> at all after this change.

> @@ -85,9 +91,10 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
>  {
>         struct gpio_led_data *led_dat =
>                 container_of(led_cdev, struct gpio_led_data, cdev);
> +       int gpio = desc_to_gpio(led_dat->gpiod);
>
>         led_dat->blinking = 1;
> -       return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
> +       return led_dat->platform_gpio_blink_set(gpio, GPIO_LED_BLINK,
>                                                 delay_on, delay_off);
>  }

While this is a nice first step, it must be possible to patch all in-kernel
users of this callback to take a gpiod too...

It's actually just:

$ git grep gpio_blink_set
arch/arm/mach-orion5x/dns323-setup.c:   .gpio_blink_set =
orion_gpio_led_blink_set,
arch/arm/mach-orion5x/dns323-setup.c:   .gpio_blink_set =
orion_gpio_led_blink_set,
arch/arm/mach-s3c24xx/mach-h1940.c:     .gpio_blink_set = h1940_led_blink_set,
arch/arm/mach-s3c24xx/mach-rx1950.c:    .gpio_blink_set = rx1950_led_blink_set,

However we can do that as a follow-up patch. (Add to TODO...)

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/