Re: [RFC PATCH v2 09/16] leds: leds-gpio: Add support for GPIO descriptors

[Mika Westerberg]

On Wed, Sep 24, 2014 at 09:55:48AM +0200, Linus Walleij wrote:
> On Tue, Sep 16, 2014 at 1:52 PM, Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> 
> > GPIO descriptors are the preferred way over legacy GPIO numbers
> > nowadays. Convert the driver to use GPIO descriptors internally but
> > still allow passing legacy GPIO numbers from platform data to support
> > existing platforms.
> >
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> 
> Great!
> 
> >  #include <linux/gpio.h>
> > +#include <linux/gpio/consumer.h>
> 
> You should not need to include <linux/gpio.h> at all after this change.

It is still needed because we call devm_gpio_request_one() if we find
legacy numbers from platform data.

> > @@ -85,9 +91,10 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
> >  {
> >         struct gpio_led_data *led_dat =
> >                 container_of(led_cdev, struct gpio_led_data, cdev);
> > +       int gpio = desc_to_gpio(led_dat->gpiod);
> >
> >         led_dat->blinking = 1;
> > -       return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
> > +       return led_dat->platform_gpio_blink_set(gpio, GPIO_LED_BLINK,
> >                                                 delay_on, delay_off);
> >  }
> 
> While this is a nice first step, it must be possible to patch all in-kernel
> users of this callback to take a gpiod too...
> 
> It's actually just:
> 
> $ git grep gpio_blink_set
> arch/arm/mach-orion5x/dns323-setup.c:   .gpio_blink_set =
> orion_gpio_led_blink_set,
> arch/arm/mach-orion5x/dns323-setup.c:   .gpio_blink_set =
> orion_gpio_led_blink_set,
> arch/arm/mach-s3c24xx/mach-h1940.c:     .gpio_blink_set = h1940_led_blink_set,
> arch/arm/mach-s3c24xx/mach-rx1950.c:    .gpio_blink_set = rx1950_led_blink_set,
> 
> However we can do that as a follow-up patch. (Add to TODO...)

OK, I'll add that to my TODO list :)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/