Re: [PATCH v2 2/4] regulator: Set ena_gpio_initialized in regulator drivers

[Markus Pargmann]

On Wed, Oct 08, 2014 at 04:53:33PM +0200, Krzysztof Kozlowski wrote:
> On Åro, 2014-10-08 at 15:47 +0200, Markus Pargmann wrote:
> > This patch sets ena_gpio_initialized for all drivers which set a
> > ena_gpio from parsed DT properties. Drivers using pdata may get zero
> > initialized pdata and therefore copy a 0 into the regulator_config
> > ena_gpio field.
> > 
> > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> 
> (... rewind to s2m/s5m... I think Mark asked for splitting this per
> driver)

Then I misunderstood Mark, I thought he just meant the fixups at the end
of the last series.

> 
> > diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
> > index adab82d5279f..49b9e1ddc87e 100644
> > --- a/drivers/regulator/s2mps11.c
> > +++ b/drivers/regulator/s2mps11.c
> > @@ -897,6 +897,7 @@ common_reg:
> >  			config.of_node = rdata[i].of_node;
> >  		}
> >  		config.ena_gpio = s2mps11->ext_control_gpio[i];
> > +		config.ena_gpio_initialized = true;
> >  
> >  		regulator = devm_regulator_register(&pdev->dev,
> >  						&regulators[i], &config);
> 
> Looks good.
> 
> > diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
> > index 0ab5cbeeb797..7f176cdb7e37 100644
> > --- a/drivers/regulator/s5m8767.c
> > +++ b/drivers/regulator/s5m8767.c
> > @@ -466,6 +466,7 @@ static void s5m8767_regulator_config_ext_control(struct s5m8767_info *s5m8767,
> >  	}
> >  
> >  	config->ena_gpio = rdata->ext_control_gpio;
> > +	config->ena_gpio_initialized = true;
> >  	config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
> >  }
> 
> It will work fine but a little messy. The 'config' is re-used in loop
> for next regulators, so:
> 1. regulator X with GPIO=-ENODEV, ena_gpio_initialized=false
> 2. regulator X+1 with real GPIO, ena_gpio_initialized=true
> 3. regulator X+2 with GPIO=-ENODEV, ena_gpio_initialized=true
> 
> 
> Instead do this in probe around line 950:
>  config.ena_gpio = -EINVAL;
>  config.ena_gpio_flags = 0;
> +config->ena_gpio_initialized = true;
>  if (gpio_is_valid(pdata->regulators[i].ext_control_gpio))
>  	s5m8767_regulator_config_ext_control(s5m8767,
>  			&pdata->regulators[i], &config);

I will fix that.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Attachment: signature.asc
Description: Digital signature