[PATCH v3 11/14] mfd/regulator: dt-bindings: max77686: Document gpio properties
From: Krzysztof Kozlowski
Date: Thu Oct 30 2014 - 07:23:23 EST
Document usage of gpio properties which turn on external/GPIO control
over regulator.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/max77686.txt | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index f4010a9f66eb..b8013e69da65 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -22,7 +22,14 @@ Optional node:
Required property:
- compatible : Must be "maxim,max77686-pmic"
- Optional properties: For each regulator use following format:
+ Optional properties:
+ - ldo20-gpio : GPIO to use for LDO20 enable control.
+ - ldo21-gpio : GPIO to use for LDO21 enable control.
+ - ldo22-gpio : GPIO to use for LDO22 enable control.
+ - buck8-gpio : GPIO to use for BUCK8 enable control.
+ - buck9-gpio : GPIO to use for BUCK9 enable control.
+
+ For each regulator use following format:
regulator_name {
regulator-compatible = LDOn/BUCKn
standard regulator constraints....
@@ -42,7 +49,6 @@ to get matched with their hardware counterparts as follow:
-BUCKn : 1-4.
Use standard regulator bindings for it ('regulator-off-in-suspend').
-
Example:
max77686@09 {
@@ -53,6 +59,7 @@ Example:
voltage-regulators {
compatible = "maxim,max77686-pmic";
+ ldo21-gpio = <&gpy2 0 GPIO_ACTIVE_HIGH>;
ldo11_reg {
regulator-compatible = "LDO11";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/