[PATCH] serial: Fix io address assign flow with Fintek PCI-to-UART Product

From: Peter Hung
Date: Wed Nov 19 2014 - 00:22:36 EST


The original driver fixed the io address with 0xe000+idx*8,
but real io address assigned from BIOS is dynamically from
read PCI configure space 0x24, 0x20, 0x1c.

The Fintek F81504/F81508/F81512 maybe malfunction without
this patch and malfunction surely when more then 1 PCI card.

Signed-off-by: Peter Hung <hpeter+linux_kernel@xxxxxxxxx>
---
drivers/tty/serial/8250/8250_pci.c | 61 ++++++++++++++++++++++++++++----------
1 file changed, 46 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0468e15..31feeb2 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1554,25 +1554,48 @@ static int pci_fintek_setup(struct serial_private *priv,
unsigned long iobase;
unsigned long ciobase = 0;
u8 config_base;
+ u32 bar_data[3];

/*
- * We are supposed to be able to read these from the PCI config space,
- * but the values there don't seem to match what we need to use, so
- * just use these hard-coded values for now, as they are correct.
+ * Find each UARTs offset in PCI configuraion space
*/
switch (idx) {
- case 0: iobase = 0xe000; config_base = 0x40; break;
- case 1: iobase = 0xe008; config_base = 0x48; break;
- case 2: iobase = 0xe010; config_base = 0x50; break;
- case 3: iobase = 0xe018; config_base = 0x58; break;
- case 4: iobase = 0xe020; config_base = 0x60; break;
- case 5: iobase = 0xe028; config_base = 0x68; break;
- case 6: iobase = 0xe030; config_base = 0x70; break;
- case 7: iobase = 0xe038; config_base = 0x78; break;
- case 8: iobase = 0xe040; config_base = 0x80; break;
- case 9: iobase = 0xe048; config_base = 0x88; break;
- case 10: iobase = 0xe050; config_base = 0x90; break;
- case 11: iobase = 0xe058; config_base = 0x98; break;
+ case 0:
+ config_base = 0x40;
+ break;
+ case 1:
+ config_base = 0x48;
+ break;
+ case 2:
+ config_base = 0x50;
+ break;
+ case 3:
+ config_base = 0x58;
+ break;
+ case 4:
+ config_base = 0x60;
+ break;
+ case 5:
+ config_base = 0x68;
+ break;
+ case 6:
+ config_base = 0x70;
+ break;
+ case 7:
+ config_base = 0x78;
+ break;
+ case 8:
+ config_base = 0x80;
+ break;
+ case 9:
+ config_base = 0x88;
+ break;
+ case 10:
+ config_base = 0x90;
+ break;
+ case 11:
+ config_base = 0x98;
+ break;
default:
/* Unknown number of ports, get out of here */
return -EINVAL;
@@ -1583,6 +1606,14 @@ static int pci_fintek_setup(struct serial_private *priv,
ciobase = (int)(base + (0x8 * idx));
}

+ /* Get the io address dispatch from the BIOS */
+ pci_read_config_dword(pdev, 0x24, &bar_data[0]);
+ pci_read_config_dword(pdev, 0x20, &bar_data[1]);
+ pci_read_config_dword(pdev, 0x1c, &bar_data[2]);
+
+ /* Calculate Real IO Port */
+ iobase = (bar_data[idx/4] & 0xffffffe0) + (idx % 4) * 8;
+
dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n",
__func__, idx, iobase, ciobase, config_base);

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/