Re: [PATCH 11/19] clk: samsung: exynos5433: Add clocks for CMU_BUS{0|1|2} domains

[Chanwoo Choi]

Dear Arnd,

On 11/27/2014 09:35 PM, Arnd Bergmann wrote:
> On Thursday 27 November 2014 13:12:08 Sylwester Nawrocki wrote:
>> On 27/11/14 12:56, Chanwoo Choi wrote:
>>> On 11/27/2014 08:41 PM, Arnd Bergmann wrote:
>>>>> On Thursday 27 November 2014 16:35:08 Chanwoo Choi wrote:
>>>>>>> +  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
>>>>>>> +    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
>>>>>>> +    which generates global data buses clock and global peripheral buses clock.
>>>>>>>  
>>>>>>>  - reg: physical base address of the controller and length of memory mapped
>>>>>>>    region.
>>>>>>>
>>>>>
>>>>> This looks like you are duplicating the bindings and the code, but
>>>>> it's really the same hardware multiple times with minor variations
>>>>> that you should be able to describe properly here. Why not make
>>>>> three nodes with the same compatible string and have them handled
>>>>> by the same code?
>>>
>>> Each CMU_BUSx domain of Exynos5433 have different base address as following:
>>> - CMU_BUS0's base address and range : 0x1360_0000 ~ 0x1360_0b04
>>> - CMU_BUS1's base address and range : 0x1480_0000 ~ 0x1480_0b04
>>> - CMU_BUS2's base address and range : 0x1340_0000 ~ 0x1340_0b04
>>>
>>> So, I implement CMU_BUSx domain which has each compatible string.
> 
> But the base address is in the reg property, not in the compatible
> property. What I mean is to have multiple nodes like

The merged clock driver in mainline have different compatible string
if base addresss of clock domain is different. So, I implemented each CMU_BUSx domain
with different compatible string.

> 
> 	clock-controller@113600000 {
> 		reg = <0 0x113600000 0 0x1000>;
> 		compatible = "samsung,exynos5433-cmu";
> 		#clock-cells = <1>;
> 	};
> 
> 	clock-controller@114800000 {
> 		reg = <0 0x114800000 0 0x1000>;
> 		compatible = "samsung,exynos5433-cmu";
> 		#clock-cells = <1>;
> 	};
> 
> The code will just map the local registers for each instance and then
> provide the clocks of the right instance when asked for it.

Each clock domain has not the same mux/divider/clock. So, just one compatible
string could not support all of clock domains.

Best Regards,
Chanwoo Choi

> 
>> You can always have multiple entries in the reg property. I've done
>> something like this for the exynos4415 CMU_ISPx units:
>>
>>         cmu_isp: clock-controller@12060000 {
>>                 compatible = "samsung,exynos4415-cmu-isp";
>>                 reg = <0x12060000 0xB10>, <0x12070000 0xB10>;
>>                 #clock-cells = <1>;
>>
>>                 assigned-clocks = <&cmu CLK_FOUT_ISP_PLL>;
>>                 assigned-clock-rates = <300000000>;
>>         };
> 
> This is a different problem, this is a clock controller with multiple
> sets of registers that are all different. In case of the cmu, it seems
> that they are all the same, you just have multiple copies at different
> locations, and they are connected to different devices.
> 
> 	Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/