Re: [PATCH 11/19] clk: samsung: exynos5433: Add clocks for CMU_BUS{0|1|2} domains

[Arnd Bergmann]

On Thursday 27 November 2014 21:58:53 Chanwoo Choi wrote:
> Dear Arnd,
> 
> On 11/27/2014 09:35 PM, Arnd Bergmann wrote:
> > On Thursday 27 November 2014 13:12:08 Sylwester Nawrocki wrote:
> >> On 27/11/14 12:56, Chanwoo Choi wrote:
> >>> On 11/27/2014 08:41 PM, Arnd Bergmann wrote:
> >>>>> On Thursday 27 November 2014 16:35:08 Chanwoo Choi wrote:
> >>>>>>> +  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
> >>>>>>> +    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
> >>>>>>> +    which generates global data buses clock and global peripheral buses clock.
> >>>>>>>  
> >>>>>>>  - reg: physical base address of the controller and length of memory mapped
> >>>>>>>    region.
> >>>>>>>
> >>>>>
> >>>>> This looks like you are duplicating the bindings and the code, but
> >>>>> it's really the same hardware multiple times with minor variations
> >>>>> that you should be able to describe properly here. Why not make
> >>>>> three nodes with the same compatible string and have them handled
> >>>>> by the same code?
> >>>
> >>> Each CMU_BUSx domain of Exynos5433 have different base address as following:
> >>> - CMU_BUS0's base address and range : 0x1360_0000 ~ 0x1360_0b04
> >>> - CMU_BUS1's base address and range : 0x1480_0000 ~ 0x1480_0b04
> >>> - CMU_BUS2's base address and range : 0x1340_0000 ~ 0x1340_0b04
> >>>
> >>> So, I implement CMU_BUSx domain which has each compatible string.
> > 
> > But the base address is in the reg property, not in the compatible
> > property. What I mean is to have multiple nodes like
> 
> The merged clock driver in mainline have different compatible string
> if base addresss of clock domain is different. So, I implemented each CMU_BUSx domain
> with different compatible string.

Why?

> > 	clock-controller@113600000 {
> > 		reg = <0 0x113600000 0 0x1000>;
> > 		compatible = "samsung,exynos5433-cmu";
> > 		#clock-cells = <1>;
> > 	};
> > 
> > 	clock-controller@114800000 {
> > 		reg = <0 0x114800000 0 0x1000>;
> > 		compatible = "samsung,exynos5433-cmu";
> > 		#clock-cells = <1>;
> > 	};
> > 
> > The code will just map the local registers for each instance and then
> > provide the clocks of the right instance when asked for it.
> 
> Each clock domain has not the same mux/divider/clock. So, just one compatible
> string could not support all of clock domains.

What are the specific differences? I saw that one of them has more
outputs than the others but it seemed like a superset, so you just
wouldn't be allowed to access the non-connected outputs.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/