Re: [PATCH] i8k: Add support for temperature sensor labels

[Pali RohÃr]

On Saturday 29 November 2014 18:43:15 Greg Kroah-Hartman wrote:
> On Sat, Nov 29, 2014 at 05:04:07PM +0100, Pali RohÃr wrote:
> > This patch adds labels for temperature sensors if SMM
> > function with EAX register 0x11a3 reports it. These
> > informations was taken from DOS binary NBSVC.MDM.
> > 
> > Signed-off-by: Pali RohÃr <pali.rohar@xxxxxxxxx>
> > ---
> > 
> >  drivers/char/i8k.c |  110
> >  +++++++++++++++++++++++++++++++++++++++++----------- 1
> >  file changed, 88 insertions(+), 22 deletions(-)
> > 
> > diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
> > index e34a019..77af46b 100644
> > --- a/drivers/char/i8k.c
> > +++ b/drivers/char/i8k.c
> > @@ -42,6 +42,7 @@
> > 
> >  #define I8K_SMM_GET_FAN		0x00a3
> >  #define I8K_SMM_GET_SPEED	0x02a3
> >  #define I8K_SMM_GET_TEMP	0x10a3
> > 
> > +#define I8K_SMM_GET_TEMP_TYPE	0x11a3
> > 
> >  #define I8K_SMM_GET_DELL_SIG1	0xfea3
> >  #define I8K_SMM_GET_DELL_SIG2	0xffa3
> > 
> > @@ -288,6 +289,14 @@ static int i8k_set_fan(int fan, int
> > speed)
> > 
> >  	return i8k_smm(&regs) ? : i8k_get_fan_status(fan);
> >  
> >  }
> > 
> > +static int i8k_get_temp_type(int sensor)
> > +{
> > +	struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, };
> > +
> > +	regs.ebx = sensor & 0xff;
> > +	return i8k_smm(&regs) ? : regs.eax & 0xff;
> > +}
> > +
> > 
> >  /*
> >  
> >   * Read the cpu temperature.
> >   */
> > 
> > @@ -493,6 +502,29 @@ static int i8k_open_fs(struct inode
> > *inode, struct file *file)
> > 
> >   * Hwmon interface
> >   */
> > 
> > +static ssize_t i8k_hwmon_show_temp_label(struct device
> > *dev, +				   struct device_attribute *devattr,
> > +				   char *buf)
> > +{
> > +	static const char * const labels[] = {
> > +		"CPU",
> > +		"GPU",
> > +		"SODIMM",
> > +		"Other",
> > +		"Ambient",
> > +		"Other",
> > +	};
> > +	int index = to_sensor_dev_attr(devattr)->index;
> > +	int type;
> > +
> > +	type = i8k_get_temp_type(index);
> > +	if (type < 0)
> > +		return type;
> > +	if (type >= ARRAY_SIZE(labels))
> > +		type = ARRAY_SIZE(labels) - 1;
> > +	return sprintf(buf, "%s\n", labels[type]);
> > +}
> 
> No Documentation/ABI/ entry for your new sysfs file?

It is standard hwmon sysfs entry which is used by other hwmon 
drivers... It is not i8k.ko driver specific.

-- 
Pali RohÃr
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: This is a digitally signed message part.