Re: [PATCH] wireless/p54: Remove duplicated net2280 header

From: Ricardo Ribalda Delgado
Date: Mon Dec 01 2014 - 05:47:13 EST

Next message: Michael S. Tsirkin: "Re: [PATCH RFC v3 0/3] virtio_net: enabling tx interrupts"
Previous message: Liviu Dudau: "Re: [PATCH] irqchip: gic: Allow interrupt level to be set for PPIs."
Next in thread: John W. Linville: "Re: [PATCH] wireless/p54: Remove duplicated net2280 header"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

David Miller has marked the patch as "Awaiting Upstream", which I
think means that it should be merged through the wireless tree.

Any comment from there?

On Mon, Nov 24, 2014 at 11:19 AM, Ricardo Ribalda Delgado
<ricardo.ribalda@xxxxxxxxx> wrote:
> The usb gadget driver net2280 has exported a header file with the
> register definition of the net2280 chip.
>
> Remove the custom/duplicated header file in favor of that header file
> in include/linux
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
> ---
> drivers/net/wireless/p54/net2280.h | 451 -------------------------------------
> drivers/net/wireless/p54/p54usb.h | 13 +-
> 2 files changed, 12 insertions(+), 452 deletions(-)
> delete mode 100644 drivers/net/wireless/p54/net2280.h
>
> diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h
> deleted file mode 100644
> index aedfaf2..0000000
> --- a/drivers/net/wireless/p54/net2280.h
> +++ /dev/null
> @@ -1,451 +0,0 @@
> -#ifndef NET2280_H
> -#define NET2280_H
> -/*
> - * NetChip 2280 high/full speed USB device controller.
> - * Unlike many such controllers, this one talks PCI.
> - */
> -
> -/*
> - * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
> - * Copyright (C) 2003 David Brownell
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, see <http://www.gnu.org/licenses/>.
> - */
> -
> -/*-------------------------------------------------------------------------*/
> -
> -/* NET2280 MEMORY MAPPED REGISTERS
> - *
> - * The register layout came from the chip documentation, and the bit
> - * number definitions were extracted from chip specification.
> - *
> - * Use the shift operator ('<<') to build bit masks, with readl/writel
> - * to access the registers through PCI.
> - */
> -
> -/* main registers, BAR0 + 0x0000 */
> -struct net2280_regs {
> - /* offset 0x0000 */
> - __le32 devinit;
> -#define LOCAL_CLOCK_FREQUENCY 8
> -#define FORCE_PCI_RESET 7
> -#define PCI_ID 6
> -#define PCI_ENABLE 5
> -#define FIFO_SOFT_RESET 4
> -#define CFG_SOFT_RESET 3
> -#define PCI_SOFT_RESET 2
> -#define USB_SOFT_RESET 1
> -#define M8051_RESET 0
> - __le32 eectl;
> -#define EEPROM_ADDRESS_WIDTH 23
> -#define EEPROM_CHIP_SELECT_ACTIVE 22
> -#define EEPROM_PRESENT 21
> -#define EEPROM_VALID 20
> -#define EEPROM_BUSY 19
> -#define EEPROM_CHIP_SELECT_ENABLE 18
> -#define EEPROM_BYTE_READ_START 17
> -#define EEPROM_BYTE_WRITE_START 16
> -#define EEPROM_READ_DATA 8
> -#define EEPROM_WRITE_DATA 0
> - __le32 eeclkfreq;
> - u32 _unused0;
> - /* offset 0x0010 */
> -
> - __le32 pciirqenb0; /* interrupt PCI master ... */
> -#define SETUP_PACKET_INTERRUPT_ENABLE 7
> -#define ENDPOINT_F_INTERRUPT_ENABLE 6
> -#define ENDPOINT_E_INTERRUPT_ENABLE 5
> -#define ENDPOINT_D_INTERRUPT_ENABLE 4
> -#define ENDPOINT_C_INTERRUPT_ENABLE 3
> -#define ENDPOINT_B_INTERRUPT_ENABLE 2
> -#define ENDPOINT_A_INTERRUPT_ENABLE 1
> -#define ENDPOINT_0_INTERRUPT_ENABLE 0
> - __le32 pciirqenb1;
> -#define PCI_INTERRUPT_ENABLE 31
> -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
> -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
> -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
> -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
> -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
> -#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
> -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
> -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
> -#define GPIO_INTERRUPT_ENABLE 13
> -#define DMA_D_INTERRUPT_ENABLE 12
> -#define DMA_C_INTERRUPT_ENABLE 11
> -#define DMA_B_INTERRUPT_ENABLE 10
> -#define DMA_A_INTERRUPT_ENABLE 9
> -#define EEPROM_DONE_INTERRUPT_ENABLE 8
> -#define VBUS_INTERRUPT_ENABLE 7
> -#define CONTROL_STATUS_INTERRUPT_ENABLE 6
> -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
> -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
> -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
> -#define RESUME_INTERRUPT_ENABLE 1
> -#define SOF_INTERRUPT_ENABLE 0
> - __le32 cpu_irqenb0; /* ... or onboard 8051 */
> -#define SETUP_PACKET_INTERRUPT_ENABLE 7
> -#define ENDPOINT_F_INTERRUPT_ENABLE 6
> -#define ENDPOINT_E_INTERRUPT_ENABLE 5
> -#define ENDPOINT_D_INTERRUPT_ENABLE 4
> -#define ENDPOINT_C_INTERRUPT_ENABLE 3
> -#define ENDPOINT_B_INTERRUPT_ENABLE 2
> -#define ENDPOINT_A_INTERRUPT_ENABLE 1
> -#define ENDPOINT_0_INTERRUPT_ENABLE 0
> - __le32 cpu_irqenb1;
> -#define CPU_INTERRUPT_ENABLE 31
> -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
> -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
> -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
> -#define PCI_INTA_INTERRUPT_ENABLE 24
> -#define PCI_PME_INTERRUPT_ENABLE 23
> -#define PCI_SERR_INTERRUPT_ENABLE 22
> -#define PCI_PERR_INTERRUPT_ENABLE 21
> -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
> -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
> -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
> -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
> -#define GPIO_INTERRUPT_ENABLE 13
> -#define DMA_D_INTERRUPT_ENABLE 12
> -#define DMA_C_INTERRUPT_ENABLE 11
> -#define DMA_B_INTERRUPT_ENABLE 10
> -#define DMA_A_INTERRUPT_ENABLE 9
> -#define EEPROM_DONE_INTERRUPT_ENABLE 8
> -#define VBUS_INTERRUPT_ENABLE 7
> -#define CONTROL_STATUS_INTERRUPT_ENABLE 6
> -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
> -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
> -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
> -#define RESUME_INTERRUPT_ENABLE 1
> -#define SOF_INTERRUPT_ENABLE 0
> -
> - /* offset 0x0020 */
> - u32 _unused1;
> - __le32 usbirqenb1;
> -#define USB_INTERRUPT_ENABLE 31
> -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
> -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
> -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
> -#define PCI_INTA_INTERRUPT_ENABLE 24
> -#define PCI_PME_INTERRUPT_ENABLE 23
> -#define PCI_SERR_INTERRUPT_ENABLE 22
> -#define PCI_PERR_INTERRUPT_ENABLE 21
> -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
> -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
> -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
> -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
> -#define GPIO_INTERRUPT_ENABLE 13
> -#define DMA_D_INTERRUPT_ENABLE 12
> -#define DMA_C_INTERRUPT_ENABLE 11
> -#define DMA_B_INTERRUPT_ENABLE 10
> -#define DMA_A_INTERRUPT_ENABLE 9
> -#define EEPROM_DONE_INTERRUPT_ENABLE 8
> -#define VBUS_INTERRUPT_ENABLE 7
> -#define CONTROL_STATUS_INTERRUPT_ENABLE 6
> -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
> -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
> -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
> -#define RESUME_INTERRUPT_ENABLE 1
> -#define SOF_INTERRUPT_ENABLE 0
> - __le32 irqstat0;
> -#define INTA_ASSERTED 12
> -#define SETUP_PACKET_INTERRUPT 7
> -#define ENDPOINT_F_INTERRUPT 6
> -#define ENDPOINT_E_INTERRUPT 5
> -#define ENDPOINT_D_INTERRUPT 4
> -#define ENDPOINT_C_INTERRUPT 3
> -#define ENDPOINT_B_INTERRUPT 2
> -#define ENDPOINT_A_INTERRUPT 1
> -#define ENDPOINT_0_INTERRUPT 0
> - __le32 irqstat1;
> -#define POWER_STATE_CHANGE_INTERRUPT 27
> -#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
> -#define PCI_PARITY_ERROR_INTERRUPT 25
> -#define PCI_INTA_INTERRUPT 24
> -#define PCI_PME_INTERRUPT 23
> -#define PCI_SERR_INTERRUPT 22
> -#define PCI_PERR_INTERRUPT 21
> -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
> -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
> -#define PCI_RETRY_ABORT_INTERRUPT 17
> -#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
> -#define GPIO_INTERRUPT 13
> -#define DMA_D_INTERRUPT 12
> -#define DMA_C_INTERRUPT 11
> -#define DMA_B_INTERRUPT 10
> -#define DMA_A_INTERRUPT 9
> -#define EEPROM_DONE_INTERRUPT 8
> -#define VBUS_INTERRUPT 7
> -#define CONTROL_STATUS_INTERRUPT 6
> -#define ROOT_PORT_RESET_INTERRUPT 4
> -#define SUSPEND_REQUEST_INTERRUPT 3
> -#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
> -#define RESUME_INTERRUPT 1
> -#define SOF_INTERRUPT 0
> - /* offset 0x0030 */
> - __le32 idxaddr;
> - __le32 idxdata;
> - __le32 fifoctl;
> -#define PCI_BASE2_RANGE 16
> -#define IGNORE_FIFO_AVAILABILITY 3
> -#define PCI_BASE2_SELECT 2
> -#define FIFO_CONFIGURATION_SELECT 0
> - u32 _unused2;
> - /* offset 0x0040 */
> - __le32 memaddr;
> -#define START 28
> -#define DIRECTION 27
> -#define FIFO_DIAGNOSTIC_SELECT 24
> -#define MEMORY_ADDRESS 0
> - __le32 memdata0;
> - __le32 memdata1;
> - u32 _unused3;
> - /* offset 0x0050 */
> - __le32 gpioctl;
> -#define GPIO3_LED_SELECT 12
> -#define GPIO3_INTERRUPT_ENABLE 11
> -#define GPIO2_INTERRUPT_ENABLE 10
> -#define GPIO1_INTERRUPT_ENABLE 9
> -#define GPIO0_INTERRUPT_ENABLE 8
> -#define GPIO3_OUTPUT_ENABLE 7
> -#define GPIO2_OUTPUT_ENABLE 6
> -#define GPIO1_OUTPUT_ENABLE 5
> -#define GPIO0_OUTPUT_ENABLE 4
> -#define GPIO3_DATA 3
> -#define GPIO2_DATA 2
> -#define GPIO1_DATA 1
> -#define GPIO0_DATA 0
> - __le32 gpiostat;
> -#define GPIO3_INTERRUPT 3
> -#define GPIO2_INTERRUPT 2
> -#define GPIO1_INTERRUPT 1
> -#define GPIO0_INTERRUPT 0
> -} __packed;
> -
> -/* usb control, BAR0 + 0x0080 */
> -struct net2280_usb_regs {
> - /* offset 0x0080 */
> - __le32 stdrsp;
> -#define STALL_UNSUPPORTED_REQUESTS 31
> -#define SET_TEST_MODE 16
> -#define GET_OTHER_SPEED_CONFIGURATION 15
> -#define GET_DEVICE_QUALIFIER 14
> -#define SET_ADDRESS 13
> -#define ENDPOINT_SET_CLEAR_HALT 12
> -#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
> -#define GET_STRING_DESCRIPTOR_2 10
> -#define GET_STRING_DESCRIPTOR_1 9
> -#define GET_STRING_DESCRIPTOR_0 8
> -#define GET_SET_INTERFACE 6
> -#define GET_SET_CONFIGURATION 5
> -#define GET_CONFIGURATION_DESCRIPTOR 4
> -#define GET_DEVICE_DESCRIPTOR 3
> -#define GET_ENDPOINT_STATUS 2
> -#define GET_INTERFACE_STATUS 1
> -#define GET_DEVICE_STATUS 0
> - __le32 prodvendid;
> -#define PRODUCT_ID 16
> -#define VENDOR_ID 0
> - __le32 relnum;
> - __le32 usbctl;
> -#define SERIAL_NUMBER_INDEX 16
> -#define PRODUCT_ID_STRING_ENABLE 13
> -#define VENDOR_ID_STRING_ENABLE 12
> -#define USB_ROOT_PORT_WAKEUP_ENABLE 11
> -#define VBUS_PIN 10
> -#define TIMED_DISCONNECT 9
> -#define SUSPEND_IMMEDIATELY 7
> -#define SELF_POWERED_USB_DEVICE 6
> -#define REMOTE_WAKEUP_SUPPORT 5
> -#define PME_POLARITY 4
> -#define USB_DETECT_ENABLE 3
> -#define PME_WAKEUP_ENABLE 2
> -#define DEVICE_REMOTE_WAKEUP_ENABLE 1
> -#define SELF_POWERED_STATUS 0
> - /* offset 0x0090 */
> - __le32 usbstat;
> -#define HIGH_SPEED 7
> -#define FULL_SPEED 6
> -#define GENERATE_RESUME 5
> -#define GENERATE_DEVICE_REMOTE_WAKEUP 4
> - __le32 xcvrdiag;
> -#define FORCE_HIGH_SPEED_MODE 31
> -#define FORCE_FULL_SPEED_MODE 30
> -#define USB_TEST_MODE 24
> -#define LINE_STATE 16
> -#define TRANSCEIVER_OPERATION_MODE 2
> -#define TRANSCEIVER_SELECT 1
> -#define TERMINATION_SELECT 0
> - __le32 setup0123;
> - __le32 setup4567;
> - /* offset 0x0090 */
> - u32 _unused0;
> - __le32 ouraddr;
> -#define FORCE_IMMEDIATE 7
> -#define OUR_USB_ADDRESS 0
> - __le32 ourconfig;
> -} __packed;
> -
> -/* pci control, BAR0 + 0x0100 */
> -struct net2280_pci_regs {
> - /* offset 0x0100 */
> - __le32 pcimstctl;
> -#define PCI_ARBITER_PARK_SELECT 13
> -#define PCI_MULTI LEVEL_ARBITER 12
> -#define PCI_RETRY_ABORT_ENABLE 11
> -#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
> -#define DMA_READ_MULTIPLE_ENABLE 9
> -#define DMA_READ_LINE_ENABLE 8
> -#define PCI_MASTER_COMMAND_SELECT 6
> -#define MEM_READ_OR_WRITE 0
> -#define IO_READ_OR_WRITE 1
> -#define CFG_READ_OR_WRITE 2
> -#define PCI_MASTER_START 5
> -#define PCI_MASTER_READ_WRITE 4
> -#define PCI_MASTER_WRITE 0
> -#define PCI_MASTER_READ 1
> -#define PCI_MASTER_BYTE_WRITE_ENABLES 0
> - __le32 pcimstaddr;
> - __le32 pcimstdata;
> - __le32 pcimststat;
> -#define PCI_ARBITER_CLEAR 2
> -#define PCI_EXTERNAL_ARBITER 1
> -#define PCI_HOST_MODE 0
> -} __packed;
> -
> -/* dma control, BAR0 + 0x0180 ... array of four structs like this,
> - * for channels 0..3. see also struct net2280_dma: descriptor
> - * that can be loaded into some of these registers.
> - */
> -struct net2280_dma_regs { /* [11.7] */
> - /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
> - __le32 dmactl;
> -#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
> -#define DMA_CLEAR_COUNT_ENABLE 21
> -#define DESCRIPTOR_POLLING_RATE 19
> -#define POLL_CONTINUOUS 0
> -#define POLL_1_USEC 1
> -#define POLL_100_USEC 2
> -#define POLL_1_MSEC 3
> -#define DMA_VALID_BIT_POLLING_ENABLE 18
> -#define DMA_VALID_BIT_ENABLE 17
> -#define DMA_SCATTER_GATHER_ENABLE 16
> -#define DMA_OUT_AUTO_START_ENABLE 4
> -#define DMA_PREEMPT_ENABLE 3
> -#define DMA_FIFO_VALIDATE 2
> -#define DMA_ENABLE 1
> -#define DMA_ADDRESS_HOLD 0
> - __le32 dmastat;
> -#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
> -#define DMA_TRANSACTION_DONE_INTERRUPT 24
> -#define DMA_ABORT 1
> -#define DMA_START 0
> - u32 _unused0[2];
> - /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
> - __le32 dmacount;
> -#define VALID_BIT 31
> -#define DMA_DIRECTION 30
> -#define DMA_DONE_INTERRUPT_ENABLE 29
> -#define END_OF_CHAIN 28
> -#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
> -#define DMA_BYTE_COUNT 0
> - __le32 dmaaddr;
> - __le32 dmadesc;
> - u32 _unused1;
> -} __packed;
> -
> -/* dedicated endpoint registers, BAR0 + 0x0200 */
> -
> -struct net2280_dep_regs { /* [11.8] */
> - /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
> - __le32 dep_cfg;
> - /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
> - __le32 dep_rsp;
> - u32 _unused[2];
> -} __packed;
> -
> -/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
> - * like this, for ep0 then the configurable endpoints A..F
> - * ep0 reserved for control; E and F have only 64 bytes of fifo
> - */
> -struct net2280_ep_regs { /* [11.9] */
> - /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
> - __le32 ep_cfg;
> -#define ENDPOINT_BYTE_COUNT 16
> -#define ENDPOINT_ENABLE 10
> -#define ENDPOINT_TYPE 8
> -#define ENDPOINT_DIRECTION 7
> -#define ENDPOINT_NUMBER 0
> - __le32 ep_rsp;
> -#define SET_NAK_OUT_PACKETS 15
> -#define SET_EP_HIDE_STATUS_PHASE 14
> -#define SET_EP_FORCE_CRC_ERROR 13
> -#define SET_INTERRUPT_MODE 12
> -#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
> -#define SET_NAK_OUT_PACKETS_MODE 10
> -#define SET_ENDPOINT_TOGGLE 9
> -#define SET_ENDPOINT_HALT 8
> -#define CLEAR_NAK_OUT_PACKETS 7
> -#define CLEAR_EP_HIDE_STATUS_PHASE 6
> -#define CLEAR_EP_FORCE_CRC_ERROR 5
> -#define CLEAR_INTERRUPT_MODE 4
> -#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
> -#define CLEAR_NAK_OUT_PACKETS_MODE 2
> -#define CLEAR_ENDPOINT_TOGGLE 1
> -#define CLEAR_ENDPOINT_HALT 0
> - __le32 ep_irqenb;
> -#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
> -#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
> -#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
> -#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
> -#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
> -#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
> - __le32 ep_stat;
> -#define FIFO_VALID_COUNT 24
> -#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
> -#define TIMEOUT 21
> -#define USB_STALL_SENT 20
> -#define USB_IN_NAK_SENT 19
> -#define USB_IN_ACK_RCVD 18
> -#define USB_OUT_PING_NAK_SENT 17
> -#define USB_OUT_ACK_SENT 16
> -#define FIFO_OVERFLOW 13
> -#define FIFO_UNDERFLOW 12
> -#define FIFO_FULL 11
> -#define FIFO_EMPTY 10
> -#define FIFO_FLUSH 9
> -#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
> -#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
> -#define NAK_OUT_PACKETS 4
> -#define DATA_PACKET_RECEIVED_INTERRUPT 3
> -#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
> -#define DATA_OUT_PING_TOKEN_INTERRUPT 1
> -#define DATA_IN_TOKEN_INTERRUPT 0
> - /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
> - __le32 ep_avail;
> - __le32 ep_data;
> - u32 _unused0[2];
> -} __packed;
> -
> -struct net2280_reg_write {
> - __le16 port;
> - __le32 addr;
> - __le32 val;
> -} __packed;
> -
> -struct net2280_reg_read {
> - __le16 port;
> - __le32 addr;
> -} __packed;
> -#endif /* NET2280_H */
> diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
> index d273be7..a5f5f0f 100644
> --- a/drivers/net/wireless/p54/p54usb.h
> +++ b/drivers/net/wireless/p54/p54usb.h
> @@ -16,7 +16,7 @@
>
> /* for isl3886 register definitions used on ver 1 devices */
> #include "p54pci.h"
> -#include "net2280.h"
> +#include <linux/usb/net2280.h>
>
> /* pci */
> #define NET2280_BASE 0x10000000
> @@ -93,6 +93,17 @@ enum net2280_op_type {
> NET2280_DEV_CFG_U16 = 0x0883
> };
>
> +struct net2280_reg_write {
> + __le16 port;
> + __le32 addr;
> + __le32 val;
> +} __packed;
> +
> +struct net2280_reg_read {
> + __le16 port;
> + __le32 addr;
> +} __packed;
> +
> #define P54U_FW_BLOCK 2048
>
> #define X2_SIGNATURE "x2 "
> --
> 2.1.3
>

--
Ricardo Ribalda
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Michael S. Tsirkin: "Re: [PATCH RFC v3 0/3] virtio_net: enabling tx interrupts"
Previous message: Liviu Dudau: "Re: [PATCH] irqchip: gic: Allow interrupt level to be set for PPIs."
Next in thread: John W. Linville: "Re: [PATCH] wireless/p54: Remove duplicated net2280 header"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]