Re: [PATCH] wireless/p54: Remove duplicated net2280 header

From: Ricardo Ribalda Delgado
Date: Mon Dec 01 2014 - 15:57:19 EST

Next message: j . glisse: "[PATCH] scripts/package: binrpm-pkg do not build source tar file v2"
Previous message: Max Filippov: "Re: [PATCH] arch: uapi: asm: mman.h: Support MADV_FREE for madvise()"
In reply to: John W. Linville: "Re: [PATCH] wireless/p54: Remove duplicated net2280 header"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello John

No sorry. I only checked patchwork and the mailing list. I was
expecting the typical mail when a patch is merged into a tree :),
sorry about that, first contrib to the wireless subsystem.

Thanks

On Mon, Dec 1, 2014 at 8:59 PM, John W. Linville <linville@xxxxxxxxxxxxx> wrote:
> Did you check the wireless-next tree's git logs?
>
> commit a831f20b6d6460640b83644d1c1df6e7e8ca9f68
> Author: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
> Date: Mon Nov 24 11:19:51 2014 +0100
>
> wireless/p54: Remove duplicated net2280 header
>
> The usb gadget driver net2280 has exported a header file with the
> register definition of the net2280 chip.
>
> Remove the custom/duplicated header file in favor of that header file
> in include/linux
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
> Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
>
> On Mon, Dec 01, 2014 at 11:46:43AM +0100, Ricardo Ribalda Delgado wrote:
>> David Miller has marked the patch as "Awaiting Upstream", which I
>> think means that it should be merged through the wireless tree.
>>
>> Any comment from there?
>>
>> On Mon, Nov 24, 2014 at 11:19 AM, Ricardo Ribalda Delgado
>> <ricardo.ribalda@xxxxxxxxx> wrote:
>> > The usb gadget driver net2280 has exported a header file with the
>> > register definition of the net2280 chip.
>> >
>> > Remove the custom/duplicated header file in favor of that header file
>> > in include/linux
>> >
>> > Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
>> > ---
>> > drivers/net/wireless/p54/net2280.h | 451 -------------------------------------
>> > drivers/net/wireless/p54/p54usb.h | 13 +-
>> > 2 files changed, 12 insertions(+), 452 deletions(-)
>> > delete mode 100644 drivers/net/wireless/p54/net2280.h
>> >
>> > diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h
>> > deleted file mode 100644
>> > index aedfaf2..0000000
>> > --- a/drivers/net/wireless/p54/net2280.h
>> > +++ /dev/null
>> > @@ -1,451 +0,0 @@
>> > -#ifndef NET2280_H
>> > -#define NET2280_H
>> > -/*
>> > - * NetChip 2280 high/full speed USB device controller.
>> > - * Unlike many such controllers, this one talks PCI.
>> > - */
>> > -
>> > -/*
>> > - * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
>> > - * Copyright (C) 2003 David Brownell
>> > - *
>> > - * This program is free software; you can redistribute it and/or modify
>> > - * it under the terms of the GNU General Public License as published by
>> > - * the Free Software Foundation; either version 2 of the License, or
>> > - * (at your option) any later version.
>> > - *
>> > - * This program is distributed in the hope that it will be useful,
>> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> > - * GNU General Public License for more details.
>> > - *
>> > - * You should have received a copy of the GNU General Public License
>> > - * along with this program; if not, see <http://www.gnu.org/licenses/>.
>> > - */
>> > -
>> > -/*-------------------------------------------------------------------------*/
>> > -
>> > -/* NET2280 MEMORY MAPPED REGISTERS
>> > - *
>> > - * The register layout came from the chip documentation, and the bit
>> > - * number definitions were extracted from chip specification.
>> > - *
>> > - * Use the shift operator ('<<') to build bit masks, with readl/writel
>> > - * to access the registers through PCI.
>> > - */
>> > -
>> > -/* main registers, BAR0 + 0x0000 */
>> > -struct net2280_regs {
>> > - /* offset 0x0000 */
>> > - __le32 devinit;
>> > -#define LOCAL_CLOCK_FREQUENCY 8
>> > -#define FORCE_PCI_RESET 7
>> > -#define PCI_ID 6
>> > -#define PCI_ENABLE 5
>> > -#define FIFO_SOFT_RESET 4
>> > -#define CFG_SOFT_RESET 3
>> > -#define PCI_SOFT_RESET 2
>> > -#define USB_SOFT_RESET 1
>> > -#define M8051_RESET 0
>> > - __le32 eectl;
>> > -#define EEPROM_ADDRESS_WIDTH 23
>> > -#define EEPROM_CHIP_SELECT_ACTIVE 22
>> > -#define EEPROM_PRESENT 21
>> > -#define EEPROM_VALID 20
>> > -#define EEPROM_BUSY 19
>> > -#define EEPROM_CHIP_SELECT_ENABLE 18
>> > -#define EEPROM_BYTE_READ_START 17
>> > -#define EEPROM_BYTE_WRITE_START 16
>> > -#define EEPROM_READ_DATA 8
>> > -#define EEPROM_WRITE_DATA 0
>> > - __le32 eeclkfreq;
>> > - u32 _unused0;
>> > - /* offset 0x0010 */
>> > -
>> > - __le32 pciirqenb0; /* interrupt PCI master ... */
>> > -#define SETUP_PACKET_INTERRUPT_ENABLE 7
>> > -#define ENDPOINT_F_INTERRUPT_ENABLE 6
>> > -#define ENDPOINT_E_INTERRUPT_ENABLE 5
>> > -#define ENDPOINT_D_INTERRUPT_ENABLE 4
>> > -#define ENDPOINT_C_INTERRUPT_ENABLE 3
>> > -#define ENDPOINT_B_INTERRUPT_ENABLE 2
>> > -#define ENDPOINT_A_INTERRUPT_ENABLE 1
>> > -#define ENDPOINT_0_INTERRUPT_ENABLE 0
>> > - __le32 pciirqenb1;
>> > -#define PCI_INTERRUPT_ENABLE 31
>> > -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
>> > -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
>> > -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
>> > -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
>> > -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
>> > -#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
>> > -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
>> > -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
>> > -#define GPIO_INTERRUPT_ENABLE 13
>> > -#define DMA_D_INTERRUPT_ENABLE 12
>> > -#define DMA_C_INTERRUPT_ENABLE 11
>> > -#define DMA_B_INTERRUPT_ENABLE 10
>> > -#define DMA_A_INTERRUPT_ENABLE 9
>> > -#define EEPROM_DONE_INTERRUPT_ENABLE 8
>> > -#define VBUS_INTERRUPT_ENABLE 7
>> > -#define CONTROL_STATUS_INTERRUPT_ENABLE 6
>> > -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
>> > -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
>> > -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
>> > -#define RESUME_INTERRUPT_ENABLE 1
>> > -#define SOF_INTERRUPT_ENABLE 0
>> > - __le32 cpu_irqenb0; /* ... or onboard 8051 */
>> > -#define SETUP_PACKET_INTERRUPT_ENABLE 7
>> > -#define ENDPOINT_F_INTERRUPT_ENABLE 6
>> > -#define ENDPOINT_E_INTERRUPT_ENABLE 5
>> > -#define ENDPOINT_D_INTERRUPT_ENABLE 4
>> > -#define ENDPOINT_C_INTERRUPT_ENABLE 3
>> > -#define ENDPOINT_B_INTERRUPT_ENABLE 2
>> > -#define ENDPOINT_A_INTERRUPT_ENABLE 1
>> > -#define ENDPOINT_0_INTERRUPT_ENABLE 0
>> > - __le32 cpu_irqenb1;
>> > -#define CPU_INTERRUPT_ENABLE 31
>> > -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
>> > -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
>> > -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
>> > -#define PCI_INTA_INTERRUPT_ENABLE 24
>> > -#define PCI_PME_INTERRUPT_ENABLE 23
>> > -#define PCI_SERR_INTERRUPT_ENABLE 22
>> > -#define PCI_PERR_INTERRUPT_ENABLE 21
>> > -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
>> > -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
>> > -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
>> > -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
>> > -#define GPIO_INTERRUPT_ENABLE 13
>> > -#define DMA_D_INTERRUPT_ENABLE 12
>> > -#define DMA_C_INTERRUPT_ENABLE 11
>> > -#define DMA_B_INTERRUPT_ENABLE 10
>> > -#define DMA_A_INTERRUPT_ENABLE 9
>> > -#define EEPROM_DONE_INTERRUPT_ENABLE 8
>> > -#define VBUS_INTERRUPT_ENABLE 7
>> > -#define CONTROL_STATUS_INTERRUPT_ENABLE 6
>> > -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
>> > -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
>> > -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
>> > -#define RESUME_INTERRUPT_ENABLE 1
>> > -#define SOF_INTERRUPT_ENABLE 0
>> > -
>> > - /* offset 0x0020 */
>> > - u32 _unused1;
>> > - __le32 usbirqenb1;
>> > -#define USB_INTERRUPT_ENABLE 31
>> > -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
>> > -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
>> > -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
>> > -#define PCI_INTA_INTERRUPT_ENABLE 24
>> > -#define PCI_PME_INTERRUPT_ENABLE 23
>> > -#define PCI_SERR_INTERRUPT_ENABLE 22
>> > -#define PCI_PERR_INTERRUPT_ENABLE 21
>> > -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
>> > -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
>> > -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
>> > -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
>> > -#define GPIO_INTERRUPT_ENABLE 13
>> > -#define DMA_D_INTERRUPT_ENABLE 12
>> > -#define DMA_C_INTERRUPT_ENABLE 11
>> > -#define DMA_B_INTERRUPT_ENABLE 10
>> > -#define DMA_A_INTERRUPT_ENABLE 9
>> > -#define EEPROM_DONE_INTERRUPT_ENABLE 8
>> > -#define VBUS_INTERRUPT_ENABLE 7
>> > -#define CONTROL_STATUS_INTERRUPT_ENABLE 6
>> > -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
>> > -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
>> > -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
>> > -#define RESUME_INTERRUPT_ENABLE 1
>> > -#define SOF_INTERRUPT_ENABLE 0
>> > - __le32 irqstat0;
>> > -#define INTA_ASSERTED 12
>> > -#define SETUP_PACKET_INTERRUPT 7
>> > -#define ENDPOINT_F_INTERRUPT 6
>> > -#define ENDPOINT_E_INTERRUPT 5
>> > -#define ENDPOINT_D_INTERRUPT 4
>> > -#define ENDPOINT_C_INTERRUPT 3
>> > -#define ENDPOINT_B_INTERRUPT 2
>> > -#define ENDPOINT_A_INTERRUPT 1
>> > -#define ENDPOINT_0_INTERRUPT 0
>> > - __le32 irqstat1;
>> > -#define POWER_STATE_CHANGE_INTERRUPT 27
>> > -#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
>> > -#define PCI_PARITY_ERROR_INTERRUPT 25
>> > -#define PCI_INTA_INTERRUPT 24
>> > -#define PCI_PME_INTERRUPT 23
>> > -#define PCI_SERR_INTERRUPT 22
>> > -#define PCI_PERR_INTERRUPT 21
>> > -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
>> > -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
>> > -#define PCI_RETRY_ABORT_INTERRUPT 17
>> > -#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
>> > -#define GPIO_INTERRUPT 13
>> > -#define DMA_D_INTERRUPT 12
>> > -#define DMA_C_INTERRUPT 11
>> > -#define DMA_B_INTERRUPT 10
>> > -#define DMA_A_INTERRUPT 9
>> > -#define EEPROM_DONE_INTERRUPT 8
>> > -#define VBUS_INTERRUPT 7
>> > -#define CONTROL_STATUS_INTERRUPT 6
>> > -#define ROOT_PORT_RESET_INTERRUPT 4
>> > -#define SUSPEND_REQUEST_INTERRUPT 3
>> > -#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
>> > -#define RESUME_INTERRUPT 1
>> > -#define SOF_INTERRUPT 0
>> > - /* offset 0x0030 */
>> > - __le32 idxaddr;
>> > - __le32 idxdata;
>> > - __le32 fifoctl;
>> > -#define PCI_BASE2_RANGE 16
>> > -#define IGNORE_FIFO_AVAILABILITY 3
>> > -#define PCI_BASE2_SELECT 2
>> > -#define FIFO_CONFIGURATION_SELECT 0
>> > - u32 _unused2;
>> > - /* offset 0x0040 */
>> > - __le32 memaddr;
>> > -#define START 28
>> > -#define DIRECTION 27
>> > -#define FIFO_DIAGNOSTIC_SELECT 24
>> > -#define MEMORY_ADDRESS 0
>> > - __le32 memdata0;
>> > - __le32 memdata1;
>> > - u32 _unused3;
>> > - /* offset 0x0050 */
>> > - __le32 gpioctl;
>> > -#define GPIO3_LED_SELECT 12
>> > -#define GPIO3_INTERRUPT_ENABLE 11
>> > -#define GPIO2_INTERRUPT_ENABLE 10
>> > -#define GPIO1_INTERRUPT_ENABLE 9
>> > -#define GPIO0_INTERRUPT_ENABLE 8
>> > -#define GPIO3_OUTPUT_ENABLE 7
>> > -#define GPIO2_OUTPUT_ENABLE 6
>> > -#define GPIO1_OUTPUT_ENABLE 5
>> > -#define GPIO0_OUTPUT_ENABLE 4
>> > -#define GPIO3_DATA 3
>> > -#define GPIO2_DATA 2
>> > -#define GPIO1_DATA 1
>> > -#define GPIO0_DATA 0
>> > - __le32 gpiostat;
>> > -#define GPIO3_INTERRUPT 3
>> > -#define GPIO2_INTERRUPT 2
>> > -#define GPIO1_INTERRUPT 1
>> > -#define GPIO0_INTERRUPT 0
>> > -} __packed;
>> > -
>> > -/* usb control, BAR0 + 0x0080 */
>> > -struct net2280_usb_regs {
>> > - /* offset 0x0080 */
>> > - __le32 stdrsp;
>> > -#define STALL_UNSUPPORTED_REQUESTS 31
>> > -#define SET_TEST_MODE 16
>> > -#define GET_OTHER_SPEED_CONFIGURATION 15
>> > -#define GET_DEVICE_QUALIFIER 14
>> > -#define SET_ADDRESS 13
>> > -#define ENDPOINT_SET_CLEAR_HALT 12
>> > -#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
>> > -#define GET_STRING_DESCRIPTOR_2 10
>> > -#define GET_STRING_DESCRIPTOR_1 9
>> > -#define GET_STRING_DESCRIPTOR_0 8
>> > -#define GET_SET_INTERFACE 6
>> > -#define GET_SET_CONFIGURATION 5
>> > -#define GET_CONFIGURATION_DESCRIPTOR 4
>> > -#define GET_DEVICE_DESCRIPTOR 3
>> > -#define GET_ENDPOINT_STATUS 2
>> > -#define GET_INTERFACE_STATUS 1
>> > -#define GET_DEVICE_STATUS 0
>> > - __le32 prodvendid;
>> > -#define PRODUCT_ID 16
>> > -#define VENDOR_ID 0
>> > - __le32 relnum;
>> > - __le32 usbctl;
>> > -#define SERIAL_NUMBER_INDEX 16
>> > -#define PRODUCT_ID_STRING_ENABLE 13
>> > -#define VENDOR_ID_STRING_ENABLE 12
>> > -#define USB_ROOT_PORT_WAKEUP_ENABLE 11
>> > -#define VBUS_PIN 10
>> > -#define TIMED_DISCONNECT 9
>> > -#define SUSPEND_IMMEDIATELY 7
>> > -#define SELF_POWERED_USB_DEVICE 6
>> > -#define REMOTE_WAKEUP_SUPPORT 5
>> > -#define PME_POLARITY 4
>> > -#define USB_DETECT_ENABLE 3
>> > -#define PME_WAKEUP_ENABLE 2
>> > -#define DEVICE_REMOTE_WAKEUP_ENABLE 1
>> > -#define SELF_POWERED_STATUS 0
>> > - /* offset 0x0090 */
>> > - __le32 usbstat;
>> > -#define HIGH_SPEED 7
>> > -#define FULL_SPEED 6
>> > -#define GENERATE_RESUME 5
>> > -#define GENERATE_DEVICE_REMOTE_WAKEUP 4
>> > - __le32 xcvrdiag;
>> > -#define FORCE_HIGH_SPEED_MODE 31
>> > -#define FORCE_FULL_SPEED_MODE 30
>> > -#define USB_TEST_MODE 24
>> > -#define LINE_STATE 16
>> > -#define TRANSCEIVER_OPERATION_MODE 2
>> > -#define TRANSCEIVER_SELECT 1
>> > -#define TERMINATION_SELECT 0
>> > - __le32 setup0123;
>> > - __le32 setup4567;
>> > - /* offset 0x0090 */
>> > - u32 _unused0;
>> > - __le32 ouraddr;
>> > -#define FORCE_IMMEDIATE 7
>> > -#define OUR_USB_ADDRESS 0
>> > - __le32 ourconfig;
>> > -} __packed;
>> > -
>> > -/* pci control, BAR0 + 0x0100 */
>> > -struct net2280_pci_regs {
>> > - /* offset 0x0100 */
>> > - __le32 pcimstctl;
>> > -#define PCI_ARBITER_PARK_SELECT 13
>> > -#define PCI_MULTI LEVEL_ARBITER 12
>> > -#define PCI_RETRY_ABORT_ENABLE 11
>> > -#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
>> > -#define DMA_READ_MULTIPLE_ENABLE 9
>> > -#define DMA_READ_LINE_ENABLE 8
>> > -#define PCI_MASTER_COMMAND_SELECT 6
>> > -#define MEM_READ_OR_WRITE 0
>> > -#define IO_READ_OR_WRITE 1
>> > -#define CFG_READ_OR_WRITE 2
>> > -#define PCI_MASTER_START 5
>> > -#define PCI_MASTER_READ_WRITE 4
>> > -#define PCI_MASTER_WRITE 0
>> > -#define PCI_MASTER_READ 1
>> > -#define PCI_MASTER_BYTE_WRITE_ENABLES 0
>> > - __le32 pcimstaddr;
>> > - __le32 pcimstdata;
>> > - __le32 pcimststat;
>> > -#define PCI_ARBITER_CLEAR 2
>> > -#define PCI_EXTERNAL_ARBITER 1
>> > -#define PCI_HOST_MODE 0
>> > -} __packed;
>> > -
>> > -/* dma control, BAR0 + 0x0180 ... array of four structs like this,
>> > - * for channels 0..3. see also struct net2280_dma: descriptor
>> > - * that can be loaded into some of these registers.
>> > - */
>> > -struct net2280_dma_regs { /* [11.7] */
>> > - /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
>> > - __le32 dmactl;
>> > -#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
>> > -#define DMA_CLEAR_COUNT_ENABLE 21
>> > -#define DESCRIPTOR_POLLING_RATE 19
>> > -#define POLL_CONTINUOUS 0
>> > -#define POLL_1_USEC 1
>> > -#define POLL_100_USEC 2
>> > -#define POLL_1_MSEC 3
>> > -#define DMA_VALID_BIT_POLLING_ENABLE 18
>> > -#define DMA_VALID_BIT_ENABLE 17
>> > -#define DMA_SCATTER_GATHER_ENABLE 16
>> > -#define DMA_OUT_AUTO_START_ENABLE 4
>> > -#define DMA_PREEMPT_ENABLE 3
>> > -#define DMA_FIFO_VALIDATE 2
>> > -#define DMA_ENABLE 1
>> > -#define DMA_ADDRESS_HOLD 0
>> > - __le32 dmastat;
>> > -#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
>> > -#define DMA_TRANSACTION_DONE_INTERRUPT 24
>> > -#define DMA_ABORT 1
>> > -#define DMA_START 0
>> > - u32 _unused0[2];
>> > - /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
>> > - __le32 dmacount;
>> > -#define VALID_BIT 31
>> > -#define DMA_DIRECTION 30
>> > -#define DMA_DONE_INTERRUPT_ENABLE 29
>> > -#define END_OF_CHAIN 28
>> > -#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
>> > -#define DMA_BYTE_COUNT 0
>> > - __le32 dmaaddr;
>> > - __le32 dmadesc;
>> > - u32 _unused1;
>> > -} __packed;
>> > -
>> > -/* dedicated endpoint registers, BAR0 + 0x0200 */
>> > -
>> > -struct net2280_dep_regs { /* [11.8] */
>> > - /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
>> > - __le32 dep_cfg;
>> > - /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
>> > - __le32 dep_rsp;
>> > - u32 _unused[2];
>> > -} __packed;
>> > -
>> > -/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
>> > - * like this, for ep0 then the configurable endpoints A..F
>> > - * ep0 reserved for control; E and F have only 64 bytes of fifo
>> > - */
>> > -struct net2280_ep_regs { /* [11.9] */
>> > - /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
>> > - __le32 ep_cfg;
>> > -#define ENDPOINT_BYTE_COUNT 16
>> > -#define ENDPOINT_ENABLE 10
>> > -#define ENDPOINT_TYPE 8
>> > -#define ENDPOINT_DIRECTION 7
>> > -#define ENDPOINT_NUMBER 0
>> > - __le32 ep_rsp;
>> > -#define SET_NAK_OUT_PACKETS 15
>> > -#define SET_EP_HIDE_STATUS_PHASE 14
>> > -#define SET_EP_FORCE_CRC_ERROR 13
>> > -#define SET_INTERRUPT_MODE 12
>> > -#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
>> > -#define SET_NAK_OUT_PACKETS_MODE 10
>> > -#define SET_ENDPOINT_TOGGLE 9
>> > -#define SET_ENDPOINT_HALT 8
>> > -#define CLEAR_NAK_OUT_PACKETS 7
>> > -#define CLEAR_EP_HIDE_STATUS_PHASE 6
>> > -#define CLEAR_EP_FORCE_CRC_ERROR 5
>> > -#define CLEAR_INTERRUPT_MODE 4
>> > -#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
>> > -#define CLEAR_NAK_OUT_PACKETS_MODE 2
>> > -#define CLEAR_ENDPOINT_TOGGLE 1
>> > -#define CLEAR_ENDPOINT_HALT 0
>> > - __le32 ep_irqenb;
>> > -#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
>> > -#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
>> > -#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
>> > -#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
>> > -#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
>> > -#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
>> > - __le32 ep_stat;
>> > -#define FIFO_VALID_COUNT 24
>> > -#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
>> > -#define TIMEOUT 21
>> > -#define USB_STALL_SENT 20
>> > -#define USB_IN_NAK_SENT 19
>> > -#define USB_IN_ACK_RCVD 18
>> > -#define USB_OUT_PING_NAK_SENT 17
>> > -#define USB_OUT_ACK_SENT 16
>> > -#define FIFO_OVERFLOW 13
>> > -#define FIFO_UNDERFLOW 12
>> > -#define FIFO_FULL 11
>> > -#define FIFO_EMPTY 10
>> > -#define FIFO_FLUSH 9
>> > -#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
>> > -#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
>> > -#define NAK_OUT_PACKETS 4
>> > -#define DATA_PACKET_RECEIVED_INTERRUPT 3
>> > -#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
>> > -#define DATA_OUT_PING_TOKEN_INTERRUPT 1
>> > -#define DATA_IN_TOKEN_INTERRUPT 0
>> > - /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
>> > - __le32 ep_avail;
>> > - __le32 ep_data;
>> > - u32 _unused0[2];
>> > -} __packed;
>> > -
>> > -struct net2280_reg_write {
>> > - __le16 port;
>> > - __le32 addr;
>> > - __le32 val;
>> > -} __packed;
>> > -
>> > -struct net2280_reg_read {
>> > - __le16 port;
>> > - __le32 addr;
>> > -} __packed;
>> > -#endif /* NET2280_H */
>> > diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
>> > index d273be7..a5f5f0f 100644
>> > --- a/drivers/net/wireless/p54/p54usb.h
>> > +++ b/drivers/net/wireless/p54/p54usb.h
>> > @@ -16,7 +16,7 @@
>> >
>> > /* for isl3886 register definitions used on ver 1 devices */
>> > #include "p54pci.h"
>> > -#include "net2280.h"
>> > +#include <linux/usb/net2280.h>
>> >
>> > /* pci */
>> > #define NET2280_BASE 0x10000000
>> > @@ -93,6 +93,17 @@ enum net2280_op_type {
>> > NET2280_DEV_CFG_U16 = 0x0883
>> > };
>> >
>> > +struct net2280_reg_write {
>> > + __le16 port;
>> > + __le32 addr;
>> > + __le32 val;
>> > +} __packed;
>> > +
>> > +struct net2280_reg_read {
>> > + __le16 port;
>> > + __le32 addr;
>> > +} __packed;
>> > +
>> > #define P54U_FW_BLOCK 2048
>> >
>> > #define X2_SIGNATURE "x2 "
>> > --
>> > 2.1.3
>> >
>>
>>
>>
>> --
>> Ricardo Ribalda
>>
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville@xxxxxxxxxxxxx might be all we have. Be ready.

--
Ricardo Ribalda
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: j . glisse: "[PATCH] scripts/package: binrpm-pkg do not build source tar file v2"
Previous message: Max Filippov: "Re: [PATCH] arch: uapi: asm: mman.h: Support MADV_FREE for madvise()"
In reply to: John W. Linville: "Re: [PATCH] wireless/p54: Remove duplicated net2280 header"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]