Re: [GIT PULL] USB driver fixes for 3.18-rc7

[Greg KH]

On Sun, Nov 30, 2014 at 11:47:20AM -0800, Linus Torvalds wrote:
> Hmm, Greg.
> 
> I seem to get this problem possibly more commonly at boot these days:
> 
>   usb 1-6: new full-speed USB device number 2 using xhci_hcd
>   usb 1-6: device descriptor read/64, error -71
>   xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
>   usb 1-6: hub failed to enable device, error -22
>   usb 1-6: new full-speed USB device number 3 using xhci_hcd
>   usb 1-6: device descriptor read/64, error -71
>   usb 1-6: hub failed to enable device, error -22
>   usb 1-6: new full-speed USB device number 4 using xhci_hcd
>   usb 1-6: Device not responding to setup address.
>   usb 1-6: Device not responding to setup address.
>   usb 1-6: device not accepting address 4, error -71
>   usb 1-6: new full-speed USB device number 5 using xhci_hcd
>   usb 1-6: Device not responding to setup address.
>   usb 1-6: Device not responding to setup address.
>   usb 1-6: device not accepting address 5, error -71
>  usb usb1-port6: unable to enumerate USB device
> 
> and my keyboard doesn't work. I then unplug and re-plug it, and get
> 
>   usb 1-6: new full-speed USB device number 9 using xhci_hcd
>   usb 1-6: New USB device found, idVendor=2516, idProduct=0020
>   usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>   usb 1-6: Product: Quickfire Rapid i
>   usb 1-6: Manufacturer: CM Storm
> 
> Any ideas? Some setup delay that isn't long enough at boot time for a
> slightly finicky device? It has happened before, but now I've gotten
> it twice within a couple of days:
> 
>   Nov 02 12:18:56 i7.lan kernel: usb 1-6: device descriptor read/64, error -71
>   Nov 28 16:54:06 i7.lan kernel: usb 1-6: device descriptor read/64, error -71
>   Nov 30 11:26:35 i7.lan kernel: usb 1-6: device descriptor read/64, error -71
> 
> (I've had this keyboard since mid-September, and looking at the logs
> this machine has been rebooted 41 times since, with those three
> failures..)

I've been seeing this occasionally recently as well, but was blaming a
"bad" USB 3 hub I have here that I use, and the problem goes away with a
replug.

Mathias, any ideas what is going on here?

thanks,

greg k-h

> 
>               Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/