[PATCH v5 1/4] ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only

[Doug Anderson]

In preparation for having init_card() called for all card types (not
just SDIO), change pandora_wl1251_init_card() so it checks whether the
card type is SDIO.

Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v5:
- Split fixup to pandora_wl1251_init_card() into its own patch.

Changes in v3: None
Changes in v2: None

 arch/arm/mach-omap2/board-omap3pandora.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f17087..969e100 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card)
 	 * We have TI wl1251 attached to MMC3. Pass this information to
 	 * SDIO core because it can't be probed by normal methods.
 	 */
-	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-	card->cccr.wide_bus = 1;
-	card->cis.vendor = 0x104c;
-	card->cis.device = 0x9066;
-	card->cis.blksize = 512;
-	card->cis.max_dtr = 20000000;
+	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+		card->cccr.wide_bus = 1;
+		card->cis.vendor = 0x104c;
+		card->cis.device = 0x9066;
+		card->cis.blksize = 512;
+		card->cis.max_dtr = 20000000;
+	}
 }
 
 static struct omap2_hsmmc_info omap3pandora_mmc[] = {
-- 
2.2.0.rc0.207.ga3a616c

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/