[PATCH v3 1/2] staging: media: lirc: lirc_zilog.c: fix quoted strings split across lines
From: Luis de Bethencourt
Date: Thu Dec 04 2014 - 17:35:09 EST
checkpatch makes an exception to the 80-column rule for quotes strings, and
Documentation/CodingStyle recommends not splitting quotes strings across lines
because it breaks the ability to grep for the string. Fixing these.
WARNING: quoted string split across lines
Signed-off-by: Luis de Bethencourt <luis@xxxxxxxxxxxxxxxxx>
---
drivers/staging/media/lirc/lirc_zilog.c | 61 ++++++++++++++++++---------------
1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c
index dca806a..8814a7e 100644
--- a/drivers/staging/media/lirc/lirc_zilog.c
+++ b/drivers/staging/media/lirc/lirc_zilog.c
@@ -372,14 +372,14 @@ static int add_to_buf(struct IR *ir)
ret);
if (failures >= 3) {
mutex_unlock(&ir->ir_lock);
- dev_err(ir->l.dev, "unable to read from the IR chip "
- "after 3 resets, giving up\n");
+ dev_err(ir->l.dev,
+ "unable to read from the IR chip after 3 resets, giving up\n");
break;
}
/* Looks like the chip crashed, reset it */
- dev_err(ir->l.dev, "polling the IR receiver chip failed, "
- "trying reset\n");
+ dev_err(ir->l.dev,
+ "polling the IR receiver chip failed, trying reset\n");
set_current_state(TASK_UNINTERRUPTIBLE);
if (kthread_should_stop()) {
@@ -405,8 +405,9 @@ static int add_to_buf(struct IR *ir)
ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf));
mutex_unlock(&ir->ir_lock);
if (ret != sizeof(keybuf)) {
- dev_err(ir->l.dev, "i2c_master_recv failed with %d -- "
- "keeping last read buffer\n", ret);
+ dev_err(ir->l.dev,
+ "i2c_master_recv failed with %d -- keeping last read buffer\n",
+ ret);
} else {
rx->b[0] = keybuf[3];
rx->b[1] = keybuf[4];
@@ -713,8 +714,9 @@ static int send_boot_data(struct IR_tx *tx)
buf[0]);
return 0;
}
- dev_notice(tx->ir->l.dev, "Zilog/Hauppauge IR blaster firmware version "
- "%d.%d.%d loaded\n", buf[1], buf[2], buf[3]);
+ dev_notice(tx->ir->l.dev,
+ "Zilog/Hauppauge IR blaster firmware version %d.%d.%d loaded\n",
+ buf[1], buf[2], buf[3]);
return 0;
}
@@ -794,9 +796,9 @@ static int fw_load(struct IR_tx *tx)
if (!read_uint8(&data, tx_data->endp, &version))
goto corrupt;
if (version != 1) {
- dev_err(tx->ir->l.dev, "unsupported code set file version (%u, expected"
- "1) -- please upgrade to a newer driver",
- version);
+ dev_err(tx->ir->l.dev,
+ "unsupported code set file version (%u, expected 1) -- please upgrade to a newer driver",
+ version);
fw_unload_locked();
ret = -EFAULT;
goto out;
@@ -983,8 +985,9 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
ret = get_key_data(data_block, code, key);
if (ret == -EPROTO) {
- dev_err(tx->ir->l.dev, "failed to get data for code %u, key %u -- check "
- "lircd.conf entries\n", code, key);
+ dev_err(tx->ir->l.dev,
+ "failed to get data for code %u, key %u -- check lircd.conf entries\n",
+ code, key);
return ret;
} else if (ret != 0)
return ret;
@@ -1059,12 +1062,14 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
ret = i2c_master_send(tx->c, buf, 1);
if (ret == 1)
break;
- dev_dbg(tx->ir->l.dev, "NAK expected: i2c_master_send "
- "failed with %d (try %d)\n", ret, i+1);
+ dev_dbg(tx->ir->l.dev,
+ "NAK expected: i2c_master_send failed with %d (try %d)\n",
+ ret, i+1);
}
if (ret != 1) {
- dev_err(tx->ir->l.dev, "IR TX chip never got ready: last i2c_master_send "
- "failed with %d\n", ret);
+ dev_err(tx->ir->l.dev,
+ "IR TX chip never got ready: last i2c_master_send failed with %d\n",
+ ret);
return ret < 0 ? ret : -EFAULT;
}
@@ -1167,12 +1172,12 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
*/
if (ret != 0) {
/* Looks like the chip crashed, reset it */
- dev_err(tx->ir->l.dev, "sending to the IR transmitter chip "
- "failed, trying reset\n");
+ dev_err(tx->ir->l.dev,
+ "sending to the IR transmitter chip failed, trying reset\n");
if (failures >= 3) {
- dev_err(tx->ir->l.dev, "unable to send to the IR chip "
- "after 3 resets, giving up\n");
+ dev_err(tx->ir->l.dev,
+ "unable to send to the IR chip after 3 resets, giving up\n");
mutex_unlock(&ir->ir_lock);
mutex_unlock(&tx->client_lock);
put_ir_tx(tx, false);
@@ -1542,8 +1547,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* Proceed only if the Rx client is also ready or not needed */
if (rx == NULL && !tx_only) {
- dev_info(tx->ir->l.dev, "probe of IR Tx on %s (i2c-%d) done. Waiting"
- " on IR Rx.\n", adap->name, adap->nr);
+ dev_info(tx->ir->l.dev,
+ "probe of IR Tx on %s (i2c-%d) done. Waiting on IR Rx.\n",
+ adap->name, adap->nr);
goto out_ok;
}
} else {
@@ -1581,8 +1587,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
"zilog-rx-i2c-%d", adap->nr);
if (IS_ERR(rx->task)) {
ret = PTR_ERR(rx->task);
- dev_err(tx->ir->l.dev, "%s: could not start IR Rx polling thread"
- "\n", __func__);
+ dev_err(tx->ir->l.dev,
+ "%s: could not start IR Rx polling thread\n",
+ __func__);
/* Failed kthread, so put back the ir ref */
put_ir_device(ir, true);
/* Failure exit, so put back rx ref from i2c_client */
@@ -1594,8 +1601,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* Proceed only if the Tx client is also ready */
if (tx == NULL) {
- pr_info("probe of IR Rx on %s (i2c-%d) done. Waiting"
- " on IR Tx.\n", adap->name, adap->nr);
+ pr_info("probe of IR Rx on %s (i2c-%d) done. Waiting on IR Tx.\n",
+ adap->name, adap->nr);
goto out_ok;
}
}
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/